KOGAN ACTIVE 4 SE KAA4SESWGNA (01) PDF Document

Water resistance is not permanent and may be reduced by time of use and daily wear and tear. To maintain the waterproof performance of your KOGAN ACTIVE 4 SE KAA4SESWGNA, the following conditions should be avoided, as damage caused by immersion in liquid is not covered by the warranty:

• Pressing buttons or performing functions underwater.

• Cleaning the device with an ultrasonic cleaner or weak alkaline and weak acidic detergent.

• The product is dropped from a height or subjected to other shocks.

• The product is disassembled or repaired through an unofficial authorised agency.

• The product comes into contact with alkaline substances, such as soap or suds in the shower or bath.

• The product comes into contact with perfumes, solvents, detergents, acids or acidic substances, insecticides, lotions, sunscreens, moisturising oils or hair dyes.

• Charging the product in a wet state.

• Dust and water resistance is only for the watch body; other parts (e.g. strap, charging cable) are not included.

The package for the KOGAN ACTIVE 4 SE KAA4SESWGNA includes the following components:

• Smart Watch

• Charging Cable

• User Guide

Follow these steps to set up and pair your smartwatch:

1. Charge the watch to activate and turn it on before first use. To charge, connect the magnetic charging cable to the charging contacts located on the back of the watch.

2. Search for ‘very fit’ on the App Store or Google Play, or scan the QR code in the user guide to download and install the app.

3. Open the ‘very fit’ app, enable the Bluetooth feature and grant GPS positioning permission.

4. Log in to the app and set your personal information, as well as your step and weight goals.

5. On the Device interface in the app, tap the ‘+’ icon in the upper right corner. Your phone will start searching for devices.

6. From the device list found, choose your smart watch name to pair with. You may also link the device directly by scanning the device’s QR code using the scan function.

7. Confirm the binding request on the smart watch.

8. Fill in your information and set your step goal on the App to complete the binding.

1. If the watch is off, it will automatically turn on when you put it on charge. To begin charging, attach the supplied magnetic charging cable to the magnetic charging contacts on the back of the smart watch.

2. Attach the opposite end of the cable into a USB power adapter (not supplied). Ensure the adapter meets the specified voltage and current (5V/500mA).

To ensure proper functionality and accurate readings from the sensors, wear your watch at least one finger above your wrist bone and make sure the sensor on the back of the watch touches your skin.

Screen Operation:

The smart watch has a full touch screen that supports operations including short tap, swipe left/right, and swipe up/down.

Button Operation:

The physical button supports “short press” and “long press” operations:

• Short Press: Press to return to the home page or pause an exercise.

• Long Press: Press and hold for 2 seconds to turn on the watch when it is off.

To start an exercise:

1. When the watch face interface is displayed, short press the physical button to access the application list.

2. Tap the Workout icon to access the icons of different exercise types.

3. Tap the icon of an exercise (such as Outdoor Running) to start the exercise.

The watch can display up to 20 exercise types by default. In the ‘very fit’ app’s Multi exercise mode, you can add, delete, or change the order of the exercise types displayed on the watch. There are a total of 100 exercise types to choose from in the app.

The watch also supports intelligent exercise recognition for running/walking, which can automatically pause an exercise or remind you when it ends. This feature can be turned on/off in the app.

The KOGAN ACTIVE 4 SE KAA4SESWGNA comes with 3 watch faces by default. You can switch between them manually on the watch or through the ‘very fit’ app’s watch face settings. You can also customise the watch face on the app. More watch faces are available for download from the “Watch Face Market” in the app.

By short pressing the physical button from the watch face, you can access the application list. The applications are, from top to bottom:

• Activity

• Phone

• Workout Records

• Heart Rate

• Blood oxygen

• Stress

• Sleep

• Breathe

• Clock (Alarm, Stopwatch, Timer)

• Weather

• Cycle Tracking

• Music

• Camera Control

• Find phone

• Settings

1. Frequent Contacts: You can add up to 20 frequent contacts to your watch through the ‘very fit’ app, then call these contacts directly from your watch.

2. Call History: You can view recent call history on your watch and call the numbers displayed in the call history.

3. Dialler: You can make calls through the watch’s dialler.

You can manually measure your heart rate, blood oxygen, and stress level directly on the watch. Additionally, you can turn on automatic around-the-clock monitoring for these metrics in the ‘very fit’ app settings.

For each measurement, whether it’s heart rate, blood oxygen, or stress, it is important to keep your arm and wrist still and wait patiently until the measurement finishes to ensure accuracy.

The Breathe function is designed to help soothe your emotions through guided breathing exercises.

1. Click the Breath training icon on the watch to access this feature. You can choose the duration for the exercise.

2. Click Start to directly enter the breath training animation. Follow the vibration and animation frequency to adjust your breathing.

Alarm:

You can add, delete, or turn an alarm on/off on the watch. You can also set an alarm for the watch via the ‘very fit’ app. In the app, you can set the alarm delay time and the number of times to delay.

Timer:

You can set a timer with a preset duration on the watch. The timer will remind you when it expires. You can also customise the timer time.

Stopwatch:

You can use the watch as a stopwatch. The stopwatch has a “Lap” function to record split times.

Weather:

The watch supports a three-day weather view for your current city. You can see today’s current weather, highest and lowest values, and the highest and lowest values for the next two days. This feature must be enabled in the ‘very fit’ app.

Music Control:

When the watch is connected to the app, you can control your phone’s music player. Functions include “next,” “previous,” “play/pause,” and “volume increase/decrease.” This function can be enabled or disabled in the app settings.

Camera Control:

When the watch is connected to the App, you can manually turn on the phone’s system camera and use your watch to take photos.

1. When the watch is connected to the ‘very fit’ app, you can use the Find Phone function on your watch to make your phone ring.

2. Click the icon on the watch to end the ringing.

3. This function can be enabled or disabled in the app settings.

After opening Cycle Tracking on the ‘very fit’ app, the watch will display the cycle tracking function. You can set the cycle length, reminder time, and other options in the app, and the watch will remind you periodically based on your settings.

In the watch’s settings menu, you can:

• Set the screen-on time, ringtone volume, and vibration.

• Shut down, restart, or reset the watch. Note that once reset, all data stored in the watch will be cleared and the watch will be unpaired from your phone.

Other settings options include Watch Faces, Display, Sounds and Vibration, DND Mode, Battery Level, General, About, and Help.

The Control Centre provides an easy way to access and turn on various functions. You can access it by swiping on the main watch face. Functions available in the Control Centre include:

• Do Not Disturb (DND) mode

• Raise to Wake

• Set screen brightness

• Find my phone

• Turn your watch into a flashlight