SAMSUNG GALAXY S5 ACTIVE SM-G870A (01) PDF MANUAL

• The earSmart voice processor in your phone captures your voice and all the sounds around you.

• Working like the human ear, it processes and distinguishes these sounds, isolates your voice conversation, and removes background noise from both ends of a call.

• It also automatically equalizes and adjusts voice volume so you can hear and talk naturally, even in the noisiest places.

• With earSmart technology, you can talk where you want, and have clear conversations for mobile calls, video chats, even speakerphone calls, without worrying about surrounding noise.

1. Remove the back cover by inserting a fingernail into the slot on the top of your phone.

2. Lift the cover up and away from the phone.

Caution! Do not remove the rubber seal from the inside of the back cover. Doing so can cause water damage to the device if it gets wet.

Caution! Do not bend or twist the back cover excessively. Doing so may damage the cover.

When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, available optional services, and many other features.

Important! The plug-in SIM card information and its contacts can be easily damaged by scratching or bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of small children.

Carefully slide the SIM card into the SIM card socket (as shown) until the card locks into place.

• Make sure that the card’s gold contacts face into the phone and that the upper-left angled corner of the card is positioned as shown.

Note: If the card is not inserted correctly, the phone will not detect the SIM card. Re-orient the card back into the slot if the SIM is not detected.

1. Insert the battery into the opening on the back of the phone, making sure the connectors align.

2. Gently press down to secure the battery.

You can use a microSD™ (SD) or microSDHC™ card to expand available memory space if you desire. This secure digital card enables you to exchange images, music, and data between SD-compatible devices. This type of memory card is designed for use with this mobile phone and other devices.

Note: Your phone has been tested to support up to a 128GB memory card.

Installing the Memory Card:

Push the microSD card into the slot until it clicks (as shown). The microSD card will fit on top of the SIM card.

• Make sure the microSD’s gold contact pins face downward and the card is securely inserted.

Removing the Memory Card:

1. Push on the memory card until it clicks and is released.

2. Grasp the memory card and remove it from the phone.

1. Place the battery cover onto the back of the phone and press down.

2. Press along the edge of the back cover until you have a secure seal.

3. To avoid water damage, ensure that the back cover is completely closed by pressing just below the AT&T Logo until you hear a click.

Note: Make sure the battery is properly installed before switching on the phone.

Your device is powered by a rechargeable Li-ion battery. A wall charger, which is used for charging the battery, is included with your device. Use only approved batteries and chargers.

Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 4 hours. Although you can use the phone while the battery is charging, doing so will require additional charging time.

Important! Verify that the battery is installed prior to connecting the wall charger. If both the wall charger is connected and the battery is not installed, the handset will power cycle continuously and prevent proper operation. Failure to unplug the wall charger before you remove the battery, can cause damage to the phone.

1. Connect the USB cable to the charging head.

2. Lift up on the Charger/Accessory jack cover that covers the port on the bottom of your phone and swing it open.

3. Insert the USB cable into the device’s Charger/Accessory jack.

4. Plug the charging head into a standard AC power outlet. The device turns on with the screen locked and indicates both its charge state and percent of charge.

5. When charging is finished, remove the flat end from the interface connector jack on the phone.

Important! Before closing the Charger/Accessory jack cover, check to see if there is any foreign substance such as dust or sand on the rubber seal.

6. Tightly close the multipurpose jack cover when you are finished so that no water can enter the port.

Your touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty.

When the battery is weak and only a few minutes of talk time remain, the battery icon blinks and the device sounds a warning tone at regular intervals. In this condition, your phone conserves its remaining battery power, not by turning off the backlight, but by entering the dimming mode. For a quick check of your battery level, glance at the battery charge indicator located in the upper-right corner of your device’s display. Solid color indicates a full charge.

When the battery level becomes too low, the phone automatically turns off.

Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery. The following is a list of helpful tips that can help conserve your battery power:

• Reduce the time your backlight stays on.

• Turn Bluetooth off when not in use.

• Turn Wi-Fi off when not in use.

• Deactivate the GPS when not needed. Most applications using this function will periodically query the GPS satellites for your current location; each query drains your battery.

• Do not wait until your battery is completely depleted before charging your device. Repeating this process of a complete discharge and recharge can over time reduce the storage capacity of any battery.

• Use the Power Saving feature to deactivate some hardware and interface functions.

• Check the Battery use screen to review what features or functions have been consuming your battery resources.

• Check the Running Services and close any unnecessary applications.

• Use the Task Manager feature to end/shutdown background applications that are still running. These minimized applications can, over time, cause your device to slow down.

• Animated wallpapers use processing power, memory, and more power. Change your Live Wallpaper to a non-animated Wallpaper gallery or Gallery image.

Once the device has been configured, you will not be prompted with setup screens again.

To turn the device on:

1. Press and hold Power/End until the device switches on.

The device searches for your network and after finding it, you can make or receive calls.

2. Swipe your finger across the screen to unlock the phone.

To turn the device off:

1. Press and hold Power/End until the Device options screen appears.

2. Tap Power off.

3. At the Power off prompt, tap OK.

When you first turn on your phone, you will need to set up a few things.

1. As each screen is displayed, follow the instructions on each screen to set up that particular feature.

2. Tap Next or Skip to progress to the next page.

3. At the last screen, tap Finish, to finish your setup.

This device is rated IP67 using the Ingress Protection rating system. The dust rating is 6 (highest level of protection), and the water resistance rating is 7 (water resistant up to 1 meter for up to 30 minutes). Despite this classification, your device is not impervious to water damage in any situation. It is important that all compartments are closed tightly.

Follow these tips carefully to prevent damage to the device.

• Whenever your device gets wet, dry it thoroughly with a clean, soft cloth.

• Do not expose the device to salt water or ionized water, or to water over 1 meter deep for more than 30 minutes. If your device is exposed to salt water, wash the device with fresh water then dry thoroughly with a clean, soft cloth. Otherwise, when it dries, salt may accumulate and block the microphone, earpiece, and speaker.

• When drying off your device, be sure to pat the earpiece (top front of phone), microphone (bottom of phone), and speaker (rear of phone) with a clean, soft cloth to remove as much water as possible.

• When making a call immediately after your device is wet, the microphone may have water in it which may lower the volume that the other person will hear. After drying off the device, allow the device to air-dry before making a call.

• The back and multipurpose jack covers may be loosened slightly if the device is dropped or receives an impact. Ensure that all the covers are properly aligned and tightly closed. Otherwise, they may not provide protection from water and dust.

• Always keep the multipurpose jack cover clean and be careful to avoid damaging it.

Note: The touch screen may not be active in water.

1. Press the Power/End key to lock the touch screen.

2. Press the Power/End key again to display the lock screen then swipe your finger across the screen to unlock.

Note: Swipe is the default screen locking method. To change your screen lock, see “Lock screen” on page 95 of the user manual.

In order to utilize your device to the fullest extent, you will need to create a Google™ Account when you first use your device. With a Google Account, Google applications will always be in sync between your phone and computer.

If you did not create a new account during the setup procedure when you first turned your phone on, follow these steps:

1. From the Home screen, tap Apps, then tap Gmail. The Add a Google Account screen displays.

2. Tap New to create a new Google account.

– or –

If you already have a Google account, tap Existing to sign in and add the account to your phone.

3. Follow the on-screen instructions to add a Google Account.

Note: Once you have created a Google account, you only need to sign in.

An active Samsung account is required to begin accessing applications such as ChatON and Samsung Hub. If you did not create a Samsung account when you first set up your phone, follow these steps:

1. From the home screen, tap Apps, then tap Settings.

2. Tap Accounts → Add account.

3. Tap Samsung account.

4. Tap Create new account.

5. Follow the on-screen instructions to create and activate your account.

Setting Up Your Voice Mail:

1. From the Home screen, tap Phone, then tap Voicemail.

2. Follow the tutorial to create a password, record a greeting, and record your name.

Note: These steps may be different depending on your network.

Accessing Your Voice Mail:

1. From the Home screen, tap Phone, then tap Voicemail.

You may be prompted to enter a password.

2. When connected, follow the voice prompts from the voice mail center.

Accessing Your Voice Mail From Another Phone:

1. Dial your wireless phone number.

2. When you hear your voicemail greeting, press the asterisk key on the phone you are using.

3. Enter your password and you are connected to your Voice Mail.

1. Indicator light: Illuminates with distinct colors and flashing patterns for notifications and statuses.

• Powering on and Missed Notification (Call or Messaging) – blue blinks/animates

• Battery Charging – red remains on

• Low Battery or Charging Error – red blinks/animates

• Battery Fully Charged – green remains on.

2. Active key: Lets you quickly launch features or applications with one touch.

3. Volume key: Adjusts ringer volume in standby or voice volume during a call. Pressing volume key down mutes incoming ring tone.

4. Application icons: Shortcuts to favorite applications on the Home screen.

5. Recent key: Displays a list of recently opened apps and provides access to the Task Manager.

6. Home key: Displays the Home screen. Press and hold for Google Search. Double-press to activate S Voice.

7. Microphone – bottom: Used during phone calls.

8. USB Power/Accessory connector: Connect a power cable or optional accessories.

9. Back key: Re-displays the previous screen or clears entries.

10. Primary Shortcuts: Quick access to Phone, Contacts, Messaging, Internet, and Apps.

11. Home screen indicator: Shows which Home screen is displayed.

12. Google Quick Search bar: Shortcut to Google Search.

13. Widgets: Self-contained on-screen applications.

14. Power/End key: Ends a call or switches the phone off/on. Press and hold for two seconds to:

• Access audio modes (Mute, Vibrate, Sound).

• Turn the device On or Off.

• Restart the device.

• Enable Airplane mode.

• Enable Emergency mode.

15. Indicator icons: Shows signal strength, battery level, time, unread Emails, missed calls, etc.

16. Front Facing Camera: Take pictures while facing the screen, video conference.

17. Gestures Sensor: Used to detect Air View and Air Gesture motions.

18. Proximity Sensor: Detects how close an object is to the screen; locks keypad during calls.

19. Receiver: Allows you to hear the other caller.

20. Microphone – top: Used while in speakerphone mode; assists in noise cancellation.

1. Camera lens: Used to take photos.

2. Flash: Used to take photos in low-light conditions.

3. Heart Rate Sensors: When using the S Health app, these sensors measure your heart rate via your fingertip.

4. External speaker: Allows you to hear ringers, music, and other sounds.

5. Headset jack: Allows you to connect a hands-free headset.

6. IR Transmitter: Used to emit infrared signals for controlling external devices.

The Status Bar shows information about the connection status, signal strength, battery level, and time, and displays additional notifications information. This list identifies the icons you see on your device’s display screen:

Indicator Icons:

• Signal strength: Displays your current signal strength. The greater the number of bars, the stronger the signal.

• Airplane Mode: Indicates that the Airplane Mode is active. You cannot send or receive any calls or access online information.

• No SIM card: Displays when there is no SIM card in the phone.

• No network: Displays when there is no network available.

• Blocking mode: Displays when your phone is in Blocking mode.

• System error/alert: Displays when there is a system error or alert.

• Security warning: Displays to indicate a security warning. You are prompted to set a screen lock password.

• Call in progress: Displays when a call is in progress.

• Call on hold: Displays when a call is on hold.

• Speakerphone on: Displays when the speakerphone is on.

• Missed call: Displays when a call has been missed.

• Call muted: Displays when a call has been muted.

• Call forwarding: Displays when Call forwarding is set to Always forward.

• Battery full: Displays your battery charge level. Icon shown is fully charged.

• Battery charging: Displays when your battery is charging. Also displays battery charge level.

• Device Power Low: Shows your current battery charge level.

• Device Power Critical: Shows your current battery only has less than 5 percent power remaining and will soon shutdown.

• EDGE active: Displays when your connection to an EDGE network is active.

• EDGE communicating: Displays when your phone is communicating with the EDGE network.

• 3G/HSPA active: Displays when your connection to a UTMS, HSDPA, HSPA, or HSPA+ network is active.

• 3G/HSPA communicating: Displays when your phone is communicating with the UTMS, HSDPA, HSPA, or HSPA+ network.

• 4G LTE active: Displays when your connection to a 4G LTE network is active.

• 4G LTE communicating: Displays when your phone is communicating with the 4G LTE network.

• Downloading/Installing: Displays when your phone is downloading or has downloaded a file. It will blink green when it is installing.

• Outbound file transfer: Displays when an outbound file transfer is in progress.

• Play Store download complete: Displays when a Play Store download has completed.

• Updates available: Displays when updates are available for download.

• Email received: Displays when Email is received.

• New Gmail message: Displays in the notifications window when there is a new Gmail message.

• Calendar Event: Displays when the time and date for a Calendar Event has arrived.

• Alarm: Displays when you set an alarm to ring at a specified time.

• Mute: Displays when the Sound profile is set to Mute.

• Vibrate: Displays when the Sound profile is set to Vibrate.

• USB connected: Displays when the phone is connected to a computer via a supported USB cable connection.

• USB tethered: Displays when the phone is tethered via a supported USB cable connection.

• Bluetooth active: Displays when Bluetooth is activated.

• New message: Displays when a new text or multimedia message is received.

• Bluetooth paired: Displays when a Bluetooth device has been paired with the phone.

• New voicemail: Displays when a new voice mail is received.

• Wi-Fi connected: Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP).

• Wi-Fi available: Displays when there is a Wi-Fi access point available but you are not connected to it. May also display if there is a communication issue with the target Wireless Access Point (WAP).

• Wi-Fi Direct active: Displays when Wi-Fi Direct is active and your phone is connected to another device.

• Wi-Fi hotspot active: Displays when your phone has been configured as a portable Wi-Fi hotspot.

• Location active: Displays when the Location feature is active and acquiring a signal.

• Sync active: Displays when data synchronization and application sync is active and synchronization is in progress for Gmail, Calendar, and Contacts.

• NFC active: Displays when Near Field Communication (NFC) has been activated.

• DLNA streaming control: Displays when your device is connected being used to control streaming media and is connected to a Digital Living Network Alliance (DLNA) certified device using the Samsung Link application.

• DLNA sharing: Displays when your device is currently sharing/streaming media to a paired device using the Samsung Link application.

• TTY device inserted: Displays when TTY device has been inserted.

• Screen capture taken: Displays when a screen capture has been taken.

• Keypad active: Displays when the keypad is active.

To unlock your phone:

1. Press the lock button located on the upper right side of your phone.

2. The lock screen will display with Swipe screen to unlock displayed at the bottom of the screen.

3. Swipe the touch screen in any direction.

4. The Home screen will be displayed.

You can tailor the phone’s range of functions to fit your needs using both menus and widgets. Menus, sub-menus, and features can be accessed by scrolling through the available on-screen menus. Your phone originally has three home screens but you can expand up to seven home screens.

Command Keys:

• Recent Key: Press Recent to display a list of recently opened apps.

• Home Key: Press Home to display the main Home screen. Press and hold to display access the Google Search feature.

• Back Key: Press Back to return to the previous screen, option or step.

Tap: Lightly touch items to select or launch them. For example:

• Tap the on screen keyboard to enter characters or text.

• Tap a menu item to select it.

• Tap an application’s icon to launch the application.

Touch and Hold: Activate on-screen items by a touch and hold gesture. For example:

• Touch and hold a widget on the home screen to move it.

• Touch and hold on a field to display a pop-up menu of options.

Swipe and Palm Swipe:

To swipe, lightly drag your finger vertically or horizontally across the screen. Use swipe when:

• Unlocking the screen

• Scrolling through the Home screen or a menu

To palm swipe, swipe the side of your hand horizontally across the screen. Use palm swipe when:

• Capturing the screen

Turn over: Turn your phone over so that the screen faces downward. For example:

• Mute incoming calls and playing sounds by turning your phone over.

Home Screen Overview: The main home screen is the starting point for many applications and functions, and it allows you to add items like application icons, shortcuts, folders, or Google widgets to give you instant access to information and applications. This is the default page and accessible from any menu by pressing the Home key.

Navigating Through the Home Screens: Your phone originally has four home screens but you can expand up to seven home screens. If you like, you can place different applications on each of the home screens. From the main Home screen, sweep the screen with your finger in either direction. The main Home Screen is located in the middle with a Home screen on each side.

Navigating Through the Application Menus:

Your phone initially has three Application Menus available. Follow these steps to navigate through the Application Menus:

1. At the Home screen, tap Apps. The first Application Menu will be displayed.

2. Sweep the screen left or right to access the other two menus.

3. Tap one of the application icons.

Note: As you add applications, the number of Application menus that you have available will increase.

Navigating Using Sub-Menus:

Sub-menus are available when you are at any Home screen or have selected a feature or application such as Phone, Contacts, Messaging, or Internet. To access a sub-menu:

1. Press the Menu key.

A sub-menu will appear at the bottom of the phone screen.

2. Tap an option.

1. Press the Recent key from any screen to open the recently-used applications window.

2. Tap an icon to open the selected application.

– or –

Tap the Task manager icon to go to the Task manager.

– or –

Tap the delete icon to delete the record of all recently used applications.

The Multi Window feature allows you to run multiple applications on the current screen at the same time. Note: Only applications found within the Multi window panel can be active atop another current application on the screen.

To activate Multi window via the Notification screen:

1. In a single motion, touch the Status bar to reveal the Notifications tab, and then drag it to the bottom of the screen to open the Notifications screen.

2. Swipe the row of icons to the left until the Multi window icon is displayed.

3. Tap the Multi window entry to activate the feature. The icon turns green when active.

4. Tap Home to return to the Home screen.

5. Tap the tab to open the application panel showing all the available Multi window apps.

Note: Once you have turned the Multi window option on in step 3, you only need to press and hold the Back key to re-activate the Multi window feature.

To activate Multi window via the Settings menu:

1. From the Home screen, tap Apps, then tap Settings.

2. Tap Multi window.

3. Tap the ON/OFF slider, located to the right of the Multi window field, to turn the feature on (ON).

4. Tap Home to return to the Home screen.

5. Tap the tab to open the application panel showing all the available Multi window apps.

To deactivate Multi window:

Press and hold the Back key. This action hides the Multi window tab from view.

Repositioning the Multi Window: The Multi window contains two components: tab and apps panel. The tab can be manually moved across the screen. The apps panel (containing the scrollable apps) can be relocated to lock onto either side of the screen (left or right).

To move the tab:

1. Activate the Multi window feature.

2. In a single motion, touch and hold the tab for approximately one-second, then slowly drag it to its new location along the current screen edge.

To relocate the Multi window apps panel:

1. Activate the Multi window feature.

2. Tap the tab to display the apps panel (containing the scrollable apps).

3. In a single motion, touch and hold the tab for approximately one-second to detach it from the screen, then slowly drag it to its new location along either side.

Customizing the Multi Window apps:

To rearrange the Multi window applications:

1. Activate the Multi window feature.

2. Tap the tab to display the apps panel (containing the scrollable apps).

3. In a single motion, touch and hold a desired app until it detaches from the panel, then carefully drag it to a new location in the list of apps. Lift your finger or stylus off the screen to let go of the app and drop it into its new location.

To edit a Multi window application (remove/add):

1. Activate the Multi window feature.

2. Tap the tab to display the apps panel (containing the scrollable apps).

3. Tap More (three vertical dots) → Edit (located at the bottom of the list) to reveal a staging area (on the right) that can house any removed applications from the Multi window panel.

4. To complete removal, drag an app from the left panel to the staging area on the right. Tap Done once you have completed the removal process.

To restore a Multi window application:

1. Activate the Multi window feature.

2. Tap the tab to display the apps panel.

3. Tap More (three vertical dots) → Edit to reveal the staging area containing any previously removed apps.

4. Locate the desired application in the staging area.

5. In a single motion, touch and hold a desired app until it detaches from the staging area, then carefully drag it to a new location in the current list of apps on the left.

Any of the apps found within the Multi window panel can be run at the same time as a current on-screen app. Once multiple apps are running on the same screen, you can then choose to either swap their positions or maximize a desired app.

Note: Only applications found within the Multi-window panel can be active atop another current application on the screen. When launching applications that contain multimedia files (music/video), audio from both files will be played simultaneously.

Example: Launching Messaging and Internet applications:

1. Launch an application such as Messaging.

2. Activate the Multi window feature.

3. Tap the tab to display the apps panel.

4. Touch and hold the desired app from the panel, such as Internet, until it detaches from the panel.

5. In a single motion, drag it over the current app (Messaging) and drop the new Multi window app (Internet) over either the top or bottom area of the current on-screen app.

Note: Once two applications are running, the device displays a split screen view containing both the initial app and the new Multi window app. Each application is still independent of the other.

To switch the arrangement of the applications:

1. Tap the desired application area (top or bottom).

2. With the two applications shown in a split screen, tap the Border button (the small circle between the apps) to show the on-screen functions.

3. Locate and tap Switch Window. The current apps are switched.

To increase the size of a desired application window:

1. With the two applications shown in a split screen, locate the Border bar indicating the edge of the app window.

2. In a single motion, touch and hold the Border bar then drag it to resize the desired window.

To close a selected application:

1. With the two applications shown in a split screen, tap one of the two on-screen apps to select it.

2. Tap the Border bar to show the on-screen icons.

3. Locate and tap Close Application (X icon). The current app is closed and the remaining app is maximized.

To add text or image to app (drag and drop):

Dragging and dropping a paragraph of text or a screen shot image is now possible with Multi Window.

1. Drag the Gallery app onto one of the available on-screen windows. Open an image folder.

2. With the two applications shown in a split screen, tap the Border button.

3. Locate and tap Drag and Drop Content (+ icon).

4. Drag and drop a paragraph of text or an image from one window into the other.

Note: Not all apps support this feature.

1. Arrange the Multi window view as desired (app location, height of windows, etc.).

2. Once configured, tap More (three vertical dots) then tap Create (+ icon).

3. Use the on-screen keyboard to name the new preset of paired windows.

4. Tap OK. The new preset then appears at the top of the Multi window list of apps.

5. Later, just tap the new preset to activate.

You can customize your Home screen by doing the following:

• Customizing the Toolbox

• Creating Shortcuts

• Adding and Removing Primary Shortcuts

• Adding and Removing Widgets

• Moving Icons in the Apps Menu

• Creating Application Folders

• Managing Wallpapers

• Adding and Deleting Home Screens

• Moving Home Screens

Activating the Toolbox feature displays an on-screen button that provides quick access to a set of five user-defined applications.

Important! There can only be at most five applications assigned to the quick access Toolbox button.

To activate the Toolbox feature:

1. From the Home screen, tap Apps → Settings → Toolbox.

2. In a single motion touch and slide the Toolbox slider to the right to turn it on (ON).

To customize the Toolbox applications:

1. From the active Toolbox screen, tap Edit.

2. Place a checkmark alongside up to five applications. These will be quickly accessible via the on-screen button.

3. Tap Save once you have completed the assignment of your applications.

Shortcuts are different than Widgets; shortcuts activate a feature, action, or launch an application.

Note: To move a shortcut from one screen to another, it must first be deleted from its current screen. Navigate to the new screen, then add the shortcut. Alternatively, carefully touch and hold the shortcut and slowly drag it to the edge of the screen. As the shortcut turns light blue, you can begin to move it to the adjacent screen. If this does not work, delete it from its current screen. Activate the new screen and then add the selected shortcut.

Adding a shortcut from the Apps Menu:

1. Press Home to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Tap Apps to display your current applications.

4. Scroll through the list and locate your desired application.

5. Touch and hold the application icon. This creates an immediate shortcut of the selected icon and closes the Apps tab.

6. While still holding the on-screen icon, position it on the current page. Once complete, release the screen to lock the new shortcut into its new position on the current screen.

Adding a shortcut via the Add to Home screen option:

1. Press Home to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Touch and hold on an empty area of the Home screen.

4. Tap Wallpapers, Widgets, or Home screen settings.

5. If adding from Widgets or a settings shortcut list, press and hold a shortcut from the available list and position it on the current screen.

Deleting a shortcut:

1. Press Home to activate the main Home screen.

2. Touch and hold the desired shortcut. This unlocks it from its location on the current screen.

3. Drag the icon over the Remove icon/tab and release it. As you place the shortcut into the Trash, both items turn red.

Note: This action does not delete the shortcut, it just removes it from the current screen.

You can change any of your primary shortcuts with the exception of the Apps shortcut.

To change a primary shortcut:

1. Press Home to activate the main Home screen.

2. Touch and hold the primary shortcut you want to replace, then drag it to an empty space on any Home screen (this removes it from the primary row).

3. Scroll through the App menu (tap Apps) to find the shortcut you want to add as the new primary short cut.

4. Touch and hold the new shortcut, then drag it to the empty space in the row of primary shortcuts.

The new primary shortcut will now appear on all Home screens.

To remove a primary shortcut:

• From the Home screen, touch and hold the primary shortcut you want to replace, then drag it to an empty space on any available screen. The primary shortcuts are now updated to show an empty slot.

To insert a new primary shortcut:

1. From the Home screen, tap Apps.

2. Locate your desired application, then touch and hold the on-screen icon to position it in the desired primary shortcut location. The new primary shortcut will now appear on both the Home and Extended screens.

Widgets are self-contained applications that reside in either your Widgets tab or on the main or extended Home screens. Unlike a shortcut, the Widget appears as an on-screen application.

Adding a Widget:

1. Press Home to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Touch and hold on an empty area of the screen OR press and hold the Recent key until the Edit Home screen option appears.

4. Tap Widgets at the bottom of the screen (or from the options page).

5. Press and hold an available Widget to position it on the current screen, then release the Widget.

6. While still holding the Widget, scroll over the location of the available screen and let go of the Widget to place it in the desired location.

Removing a Widget:

1. Touch and hold a Widget until you can move it around on the screen / it unlocks from the current screen.

2. Drag the Widget up to the Remove icon/tab and release it. As you place the Widget into the Trash, both items turn red.

Note: This action does not actually delete the Widget, it just removes it from the current Home screen.

To place a widget onto a different screen:

1. Touch and hold the widget until it becomes transparent.

2. Slowly drag it past the edge of the screen until the adjacent page appears highlighted and it then snaps onto the new page.

3. Drag the widget to its desired position on the new screen.

4. Repeat these steps to continue moving it to other screens.

1. Press Home to activate the main Home screen.

2. Tap Apps to display your current applications.

3. Tap the Menu key and tap View as.

4. Tap Custom. A green circle will appear next to the option.

5. Tap the Menu key and tap Edit.

6. Scroll through the list and locate the icon you wish to move.

7. Touch and drag the icon to the position that you want. To move to a different page, drag the icon to the edge of the page until the page scrolls to the desired page.

8. Tap Save.

9. Press Home to return to the Home screen.

You can create application folders to hold similar applications if you wish.

To create a folder follow these steps:

1. Press Home to activate the main Home screen.

2. Tap Apps to display your current applications.

3. Tap the Menu key and tap Edit.

4. Touch and hold the first application that you would like to move to a folder.

5. Drag the icon up to the Create folder icon (+ folder icon).

6. Enter a folder name and tap OK. A folder is displayed in the original place of the application icon with the application icon displayed on top of it. You can now drag other Apps into the folder.

7. To view information on an App, drag the App icon up to the App info (i) icon to view information on the application.

8. Tap Save.

Wallpapers consist of either Gallery images (user taken), Static Wallpaper gallery images (default wallpapers), or Live wallpapers (animated backgrounds). Supported image types: JPEG, PNG, GIF, BMP, and WBMP.

Note: Selecting animated Live wallpapers will require additional battery power.

To change the current Home screen wallpaper:

1. Navigate to an available screen containing an open area.

2. Press and hold the Recent key (or touch and hold an empty area on the Home screen) to launch the Home Screen Options page.

3. Tap Wallpapers → Home screen.

4. Scroll across the available wallpaper images and select a Wallpaper type:

• Tap More images to select from a user image stored in the camera image gallery, crop the image, and tap Done.

• Tap a Live wallpapers to select from an available animated background, once done tap Set wallpaper.

To change Wallpapers from Settings Menu:

1. From the Home screen, tap Apps → Settings → Wallpaper.

2. Choose from Home screen, Lock screen, or Home and lock screens. (The Home and lock screens option allows you to change both screens at the same time.)

3. Select a wallpaper image and tap Done or Set wallpaper.

To change the current Lock screen wallpaper:

1. From the Home screen, tap Apps → Settings → Wallpaper → Lock screen.

2. Select a wallpaper image and tap Done or Set wallpaper.

Your device comes with up to seven screens. You can delete these screens and then add them back later. These screens can be deleted and re-arranged. Your device can only contain at most seven screens and at least one screen.

To add a screen:

1. Navigate to an available screen containing an open area, then press and hold the Recent key (or touch and hold an empty area) until the Edit Home screen option page appears.

2. Scroll to the far right of the available screens and tap + Add screen. The newly added screen appears as the last page.

3. Press Home to return to the main Home screen.

To delete a screen:

1. Navigate to an available screen containing an open area, then press and hold the Recent key (or touch and hold an empty area) until the Edit Home screen option displays.

2. Scroll across the available screens, then drag the undesired screen up to the Remove tab.

3. Press Home to return to the main Home screen.

Rearranging the Screens:

1. Navigate to the Edit Home screen option page (press and hold Recent key or empty area on Home screen).

2. Touch and hold a screen and then drag it left or right into its new location. Left most is screen position #1 and right most is screen last screen.

Assigning a New Home Screen (Setting Default):

1. Navigate to the Edit Home screen option page displays.

2. Tap the Home icon at the top of a screen preview to assign an existing screen as the new Home screen. The new Home screen is highlighted and indicates the Home screen icon at the top of the selected screen.

The Notification panel includes a pull-down list to show information about processes that are running, recent notifications, and alerts.

To display the Status indicator / Notification Panel:

1. On the Home screen, touch and hold the Notification panel (Status bar at the top) until the pull-down displays, then drag down vertically.

2. Tap a notification entry to open the associated application.

Note: S Finder and Quick connect can quickly be accessed from the top area of the main Notifications screen.

Clearing Notifications:

To clear all notifications from the Notification panel:

1. From the Home screen, touch and hold the Notification panel until the pull-down displays, then drag down vertically.

2. Tap the Clear button. The notifications are cleared and the panel closes.

Accessing Additional Panel Functions (Quick Settings):

In addition to notifications, the Notification panel also provides quick and ready access to separate device functions. These can be quickly activated or deactivated by toggling them on or off.

1. From the notification panel, tap the grid icon (top right) to display additional options/all quick settings.

The following functions (default) are located in the top two rows and can either be activated (green) or deactivated (light blue): Wi-Fi, Location, Sound, Screen rotation, Bluetooth, S Finder, Quick connect, Power saving, Multi window, and Toolbox.

2. To customize, tap the pencil icon (edit), then locate the Notifications panel area located at the bottom of the Notifications panel screen.

3. In a single motion, touch and hold a desired function from the bottom two rows (available functions) and then drag it to the top two rows (active functions). Additional functions are Screen mirroring, NFC, Sync, Smart stay, Smart pause, Power saving, Blocking mode, Airplane mode, Private mode, and Touch sensitivity.

4. Tap Brightness adjustment to create a checkmark if you want to be able to adjust the screen brightness via the Notification panel.

5. After customizing, tap the menu icon (three vertical dots) and then tap the icon to display only your primary functions (if desired to revert to a more compact view).

There are three text input methods available: Google voice typing, Samsung keyboard (default), and Swype.

Selecting the Text Input Method from Settings Menu:

• From the Home screen, tap Apps → Settings → Language and input → Default and select an input method.

Selecting the Text Input Method from Text Input field:

1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications screen.

2. Tap Choose input method and select an available input method.

This feature uses Google voice recognition to convert your spoken words into on-screen text.

1. From the keyboard, touch the top of the screen and drag it down to display your notification panel.

2. Tap Choose input method → Google voice typing.

3. At the Listening prompt (Speak now microphone icon), speak clearly and distinctly into the microphone. The text is displayed in the message as you are speaking.

4. Tap Done (microphone icon with a checkmark) when you are finished.

– or –

Tap Resume (microphone icon) to resume recognition.

Note: The feature works best when you break your message down into smaller segments.

This device has a built-in, QWERTY keypad (portrait mode) or keyboard (landscape mode). Using the QWERTY keypad/keyboard, you can type letter, numbers, punctuation, and other characters.

To use the Samsung keyboard you must first configure the settings to default to the Samsung keyboard:

1. From the Home screen, tap Apps → Settings → Language and input → Default → Samsung keyboard.

– or –

From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen, then select Choose input method → Samsung keyboard.

2. The virtual keyboard is then assigned to the Samsung keyboard configuration for all subsequent text input.

Entering Text using Different Input Options (Samsung Keyboard):

Although the default text input method with the Samsung keyboard is to use the on-screen keys you have other options.

Note: To access settings, touch and hold the Input Methods button (microphone/gear icon), then tap Settings (gear icon) then select it from the available options.

1. From within an active message, tap the text input field to reveal the on-screen keyboard.

2. Tap the Input Methods button (microphone/gear icon) to use the default Voice typing input method to convert your spoken words to on-screen text.

– or –

Touch and hold the Input Methods button to select from other input methods such as:

• Voice to text: to launch the device’s Google Voice typing application to convert spoken words into on-screen text.

• Handwriting: to launch an on-screen handwriting area that can be used to convert on-screen patterns (text) to text.

• Clipboard: to launch the device’s clipboard area from where you can select a current clipboard item to place in your current message.

• Settings: to access the Samsung keyboard settings menu.

• Emoticons: to access the available Emoticons pages.

• Keyboard alignment: to detach the on-screen keyboard so that you can manually dock it anywhere on the current text entry screen. Selecting the feature again re-docks the keyboard into its original location using the original size.

Changing the Text Input Mode in Keyboard (Abc/Symbolic):

1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard.

2. With Samsung keyboard as your text entry method, select one of the following text mode options:

• Tap Abc (ABC key): to use alphabetic characters from the on-screen keyboard. In this mode, the text mode button displays Sym.

• Tap Symbol/Numeric (Sym key): to enter numbers by pressing the numbers selecting them on the on-screen keyboard. In this mode, the text mode button displays ABC. There are up to 2 available pages of numeric symbols available by tapping 1/2.

Using ABC Mode and Capitalization:

1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard.

2. Tap ABC to configure the keyboard for ABC mode. Once in this mode, the text input type shows Sym.

Note: After typing an initial uppercase character, the Shift key (up arrow) changes and all letters that follow are in lower case. Tap the Shift key to toggle capitalization (All lowercase, Initial Uppercase, All Uppercase).

• All lowercase (filled grey up arrow): Displays when the next character is entered in lowercase.

• Initial Uppercase (outlined blue up arrow): Displays when the first character of each word is entered as uppercase but all subsequent characters are lowercase.

• All Uppercase (filled blue up arrow): Displays when all characters will be entered as uppercase characters.

By default, the first letter of a new entry is capitalized and the following letters are lower-cased. After a character is entered, the cursor automatically advances to the next space.

3. Enter your text using the on-screen keyboard.

– If you make a mistake, tap X (backspace) to erase a single character.

– Touch and hold X (backspace) to erase an entire word.

4. Tap Send (or appropriate action button) to deliver the message.

Use the Symbol/Numeric Mode to add numbers, symbols, or emoticons. While in this mode, the text mode key displays ABC.

1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. Rotate the phone counterclockwise to a landscape orientation, if desired.

2. Tap ‘Sym’ to configure the keyboard for Symbol mode. Once in this mode, the text input type shows ABC.

3. Tap a number, symbol, or emoticon character.

4. Tap ‘ABC’ to return to ABC mode.

1. Tap ‘Sym’ to configure the keyboard for Symbol mode.

2. Tap the appropriate symbol key.

– or –

Tap the ‘1/2’ button to cycle through additional pages.

• The first number on this key indicates which page (1 or 2) of additional characters is active.

Swype is a text input method that allows you to enter a word by sliding your finger or stylus from letter to letter, lifting your finger between words. Swype uses error correcting algorithms and a language model to predict the next word. Swype also includes a tapping predictive text system.

The following example shows how to enter the word “This”. Put your finger down on the “T”, and without lifting, glide it to the “h”, then to the “i” then over to the “s”.

The Samsung keyboard is the default text input method, so to use Swype, you must first change the default keyboard setting.

To enable Swype:

1. From a screen where you can enter text, touch and drag down from the Notifications area then tap Select input method.

2. Tap the Swype radio button. It will turn green. The Swype keyboard is displayed.

You can access the SwypeTips application and watch a video or tutorial on using Swype. You can also use the following Swype text entry tips:

• Create a squiggle (like an S shape) to create a double letter (such as pp in apple).

• Touch and hold a key to view the punctuation menu then make a selection.

• Move your finger or stylus over the apostrophe to enter contractions.

• Double-tap on the word you want to change to correct a misspelled word, then tap the delete key to erase one character. Touch and hold the delete key to erase an entire word.

Tap the applications icon, then Settings, then About device, then Status. Your phone number is displayed in the My phone number field.

1. From the Home screen, tap the Phone icon and use the on-screen keypad to enter the number you wish to dial.

2. Tap the Call icon to make the call.

Note: When you activate the Auto redial option in the Voice Call menu, the phone will automatically redial up to 10 times when the person does not answer the call or is already on the phone.

1. From the Home screen, tap the Contacts icon.

2. Locate a contact from the list.

3. In a single motion, touch and drag your finger over the number by going to the right. This action places a call to the recipient.

If you exit the current call screen and return to the Home screen, you are visually notified that you are still on an active call by the phone icon within the Status bar.

This is the best way to stay on your current call and do something else (multi-task) such as access the Contacts list, view a recent email, locate a picture, and so forth.

Tap the on-screen reactivate button (often a green bar at the top of the screen showing call duration) to return to the currently active call.

1. From the Home screen, tap the Phone icon, then touch and hold ‘0 +’. The + character appears.

2. Use the on-screen keypad to enter the country code, area code, and phone number.

• If you make a mistake, tap the delete icon (X) until the desired numbers have been deleted.

3. Tap the Call icon to make the call.

To manually call a number with pause(s) without storing it in your Contacts list:

1. From the Home screen, tap the Phone icon and use the on-screen keypad to enter the phone number.

2. Press the Menu icon to display the dialer sub-menu.

3. Tap Add 3-sec pause to add a three second pause, and use the keypad to enter the additional numbers.

Tip: You can create pauses longer than three seconds by entering multiple three second pauses.

4. Select Add wait to add a wait. A wait will pause the calling sequence until you enter a number or press a key.

5. Tap the Call icon to make the call.

Use the following steps to correct a mis-typed entry when dialing.

After entering a number using the keypad:

• If you make a mistake, tap the delete icon (X) to erase a single character.

• Press and hold the delete icon (X) to erase the entire string of numbers.

All incoming, outgoing and missed calls are recorded in the Call log. If the number or caller is listed in your Address Book, the associated name is also displayed.

1. From the Home screen, tap the Phone icon.

2. Tap the Logs tab. A list of recent calls is displayed.

3. Tap the desired Contact to enter the Details page, then tap the Call icon to make a call.

When you are ready to end your call, tap the ‘End call’ key.

1. From an active call, you can launch a separate application or return to the Home screen. The current call is kept active in the background.

2. Tap the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen to open the Notifications panel.

3. Tap ‘End’ to end the currently active call.

When a call is received the phone rings and displays the caller’s phone number, or name if stored in the Address Book.

1. At the incoming call screen:

• Touch and drag the Answer icon (often a green phone) in any direction to answer the call.

• Touch and drag the Reject icon (often a red phone) in any direction to reject the call and send it to your voicemail.

2. Tap the ‘End call’ key to end the call.

If you do not have a SIM card installed the first time you turn on the phone, the Insert SIM card to make calls message displays. Without a SIM card, you can only make an emergency call with the phone; normal cell phone service is not available.

1. Tap Emergency call from the on-screen display to make an emergency call.

2. Enter 9-1-1 and tap the Call icon. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features.

3. Tap the ‘End call’ key to exit this calling mode.

The Emergency calling mode makes redialing an emergency number a 1-tap process. Before you can resume normal calling operations, you should first exit this mode.

1. From the Home screen, tap the Phone icon.

2. Enter the emergency number (example: 911) and then tap the Call icon.

3. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features.

Note: This mode can drain your battery power more rapidly than normal calling mode.

You can assign a short cut number to a phone number in your Contacts List for speed dialing.

To set up Speed Dial:

1. From the Home screen, tap the Contacts icon to display your Contacts List.

2. Press the Menu icon to display the Contacts List sub-menu.

3. Tap Speed dial.

4. The Speed dial screen displays showing the numbers 1 through 100. The number 1 is reserved for Voicemail.

5. Tap an unused number and the contact screen displays.

6. Tap a contact to assign to the number. The selected contact number will display in the speed dial number box.

To make a call using Speed Dial:

8. Tap the Phone icon, then Keypad and from the Dialer, touch and hold the speed dial number. If the speed dial number is more than 1 digit long, enter the first digits, then hold the last digit.

1. Access the Speed dial screen (Contacts > Menu > Speed dial).

2. Tap the X icon located next to the speed dial contact you wish to remove.

The speed dial number is removed from the speed dial list.

From the Home screen and Application menus, you have the option to access the Dialer and initiate a call by tapping the Phone icon, then Keypad. From the Dialer and the Contacts screen, the following tabs are located at the top of your screen:

• Keypad: dials the current number entered using the on-screen keypad.

• Logs: displays a list of all dialed, received, and missed calls.

• Favorites: displays your contacts that you have marked as Favorites.

• Contacts: takes you to your Address Book where you can select a contact to call.

After you begin to enter numbers, the Add to contacts option appears so you can save the Contact if needed.

The phone stores the numbers of the calls you’ve dialed, received, or missed in the Call log. The Call log displays the details of the call.

1. From the Home screen, tap the Phone icon.

2. Tap the Logs tab. A list of recent calls is displayed. If the number or caller is listed in your Address Book, the associated name is displayed.

All calls made, received, and missed are listed. Types of calls are identified by the following icons:

• Incoming Calls: (Typically a green arrow pointing towards the phone)

• Outgoing Calls: (Typically a red arrow pointing away from the phone)

• Missed Calls: (Typically a red broken arrow with a phone receiver)

• Rejected Calls: (Typically a blue circle with a line through it)

• Auto Rejected Calls: (Typically a blue circle with a line through it and a small call icon)

1. From the Home screen, tap the Phone icon, then the Logs tab. A list of recent calls is displayed. If the number or caller is listed in your Address Book, the associated name is displayed.

2. Swipe the desired missed call to the right to call.

– or –

Swipe the desired missed call to the left to message.

1. From the Home screen, tap the Phone icon, then the Logs tab. A list of recent calls is displayed.

2. Tap the call you want to save to your Address Book.

3. The call detail page is displayed. Tap the ‘Create contact’ icon (often a plus sign with a person silhouette) to add the call to your Address Book.

4. Tap Create contact to add the call to your Address Book.

– or –

If you want to replace the number for an existing contact, tap Update existing.

5. Enter information into the various fields using the keypad (e.g., Name).

6. Tap Save to save when you are finished.

1. From the Home screen, tap the Phone icon, then the Logs tab. A list of recent calls is displayed.

2. Swipe the entry you want to message to the left.

3. At the Message screen, tap the empty text field and use the on-screen keypad to type in a message.

4. When you are done with your message, tap the Send icon to send.

1. From the Home screen, tap the Phone icon, then the Logs tab. A list of recent calls is displayed.

2. Touch and hold the call you want to delete from the Call log.

3. The Call log will display with the contact checked.

4. Tap the Delete icon (often a trash can).

5. At the Delete log prompt, tap OK.

The call is deleted from the Call log.

1. From the Home screen, tap the Phone icon, then the Logs tab. A list of recent calls is displayed.

2. Touch and hold the call you want to add to the Reject List.

3. Tap Add to reject list.

4. At the Add to reject list prompt, tap OK.

Future calls from this number will be rejected and sent to your voicemail.

1. From the Home screen, tap the Phone icon, then the Logs tab.

2. Press the Menu icon, then tap Call duration.

3. The following times are displayed for Voice and Data:

• Last call: shows the length of time for the last call.

• Dialed calls: shows the total length of time for all calls made.

• Received calls: shows the total length of time for all calls received.

• All calls: shows the total length of time for all calls made and received.

4. You may reset these times to zero by pressing the Menu icon, then tapping Reset.

During a call, to adjust the volume, use the Volume keys on the left side of the phone.

• Press the Up volume key to increase the volume level and press the Down volume key to decrease the volume level.

– or –

Quickly add more volume to the incoming audio by tapping the Extra volume icon (often a speaker with a plus sign).

From the Home screen, you can also adjust the ringer volume using these same keys.

During an active call there are several functions available by tapping a corresponding on-screen button.

• Add call: displays the dialer so you can call another person.

• Keypad: displays the on-screen keypad, where you can enter numbers using DTMF (Dual Tone Multi-Frequency).

• End call: terminates the call.

• Speaker: routes the phone’s audio through either the speaker or through the earpiece.

– Tap Speaker to route the audio through the speaker. (You can adjust the speaker volume using the volume keys.) A green line will appear under the Speaker button.

– Tap Speaker again to use the phone’s earpiece. The green line will disappear when Speaker is not activated.

• Mute/Unmute: turn the onboard microphone either on or off.

– Tap Mute during a call to mute the microphone. A green line will appear under the Mute button.

– Tap Mute again to unmute the microphone. The green line will disappear when Mute is not activated.

• Bluetooth: connects to a Bluetooth headset.

– Tap Bluetooth during a call to activate a Bluetooth headset. A green line will appear under the Headset button.

– Tap Bluetooth again to de-activate the Bluetooth headset. The green line will disappear when the Headset is not activated.

• Press the Menu icon for more options:

– Hold: place the current active call on hold.

– Contacts: allows you to go to your Contact list.

– Memo: allows you to write a memo.

– Messages: allows you to write a message during a call.

– Personalize call sound: allows you to adjust the sound of the incoming call by selecting an audio equalizer setting for the current call.

– Extra volume: allows you to turn up the volume when you are in a noisy setting.

– Settings: allows you to access your Call settings.

During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer setting for the current call.

1. From the currently active call, tap the Menu icon, then Personalize call sound.

Note: If prompted to enable the feature via the Call settings menu, go to Settings, then Call settings, then Personalize call sound.

2. Select an available option. Choose from: Adapt sound, Soft sound, Clear sound, and Off.

You can place the current call on hold whenever you want. If your network supports this service, you can also make another call while a call is in progress.

1. From the currently active call, tap the Menu icon, then Hold to place the current call on hold.

To resume the call:

2. From the currently active call, tap the Menu icon, then Resume call to activate the call that is on hold.

1. From the currently active call, tap Add call to dial the second call.

2. Dial the new phone number and tap the Call icon.

When you have an active call and one call on hold:

Tap the on-screen previous On hold number entry and select Swap. The previous In call number turns gray and displays On hold. The new active call displays a green background behind the number.

Alternatively, when you have an active call and a call on hold, you may switch between the two calls, changing the one on hold to active and placing the other on hold:

1. Tap Swap.

The current call (caller #2) is placed on hold and the previous call on hold (caller #1) is then reactivated so that you can continue conversing with that person. The active call will appear in a green box.

2. Tap the End call icon to end the currently active call.

1. Tap Swap until the call you want to end appears in a green box.

2. Tap the ‘End call’ icon to end the specific call.

3. Tap the ‘End call’ icon again to end the remaining call if applicable.

You can answer another call while you have a call in progress if you have activated your Call waiting feature. Otherwise, the other call will go to your Voicemail box.

1. Tap the Answer icon and slide to the right to answer another call.

2. Tap Put “Name/Number” on hold to put the first call on hold.

– or –

Tap End call with “Name/Number” to end the first call.

3. To switch between the two calls, tap Swap.

• Swap: Places the current call on hold and then activates the previous call. The active call will appear in a green box. Tap Swap again to switch back.

1. Tap the ‘End call’ icon to disconnect the active call.

2. The call on hold will now become the active call. Tap the ‘End call’ icon to end the call.

The 3-Way or Multi-Party feature allows you to answer a series of incoming calls and place them on hold. If this service is supported by the network, all calls can be joined together. You are notified of an incoming call by a call waiting tone.

Note: The Merge option combines all of the calls you have established with your phone (both active and on hold). Swap places the current call on hold and then activates the previous call.

To join calls into a multi-party call:

1. Tap the Answer icon and slide to the right to answer the call.

2. Tap the Answer icon and slide to the right to answer the next call.

3. Tap Put “Name/Number” on hold to put the first call on hold.

4. Join the first two callers into a single multi-party call by tapping Merge.

5. To temporarily leave the conference call, tap the Menu icon, then Hold. To rejoin the conference call tap Resume call.

6. Tap the ‘End call’ icon to end the call.

While in an active call, it is possible to enable the speakerphone feature.

1. Tap Speaker. The Speaker button now appears as active (e.g., highlighted or with an indicator) and the speakerphone is activated.

2. Use the Volume keys (located on the left side of your phone) to adjust the volume.

3. To deactivate the speakerphone, tap Speaker again.

You can temporarily switch your phone’s microphone off, so that the other person cannot hear you.

Example: You wish to say something to person in the room, but do not want the person on the phone to hear you.

1. Tap Mute. The Mute button now appears as active (e.g., highlighted or with an indicator) and Mute is activated.

2. Tap Mute again to deactivate the Mute function and reactivate the microphone.

1. Tap Headset on the call screen.

2. The phone will scan for your Bluetooth headset. When found, connect to the headset. The Headset button now appears as active (e.g., highlighted or with an indicator) and the Bluetooth headset is activated.

3. Tap Headset again to deactivate the Bluetooth headset and reactivate the phone speaker.

1. During the active call, press the Menu icon, then tap Contacts.

2. Tap the Address Book entry.

You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have previously set the Call waiting option to Activate. You are notified of an incoming call by a call waiting tone.

To answer a new call while you have a call in progress:

1. In a single motion, touch the Answer icon and slide it in any direction to answer the new incoming call.

2. Tap an option from the Accept call after menu:

• Put “Name/Number” on hold to place the previous caller on hold while you answer the new incoming call.

• End call with “Name/Number” to end the previous call and answer the new call.

Note: The new caller appears at the top of the list. The previous caller is placed on hold and appears at the bottom of the list.

3. Tap the on-screen previous On hold number entry and select Swap to switch between the two calls. This places the new caller on hold and activates the previous call.

Important! The currently active call is displayed with a green background.

4. Tap Swap again to switch back.

1. From the Home screen, tap the Phone icon, then the Menu icon, then Settings, then Call, then Additional settings, then Call forwarding.

2. Tap one of the following options:

• Always forward: allows you to forward all voice calls.

• Forward when busy: allows you to forward voice calls to a designated number instead of your voice mail number if you are on another phone call.

• Forward when unanswered: allows you to forward voice calls to a designated number instead of your voicemail number when there is no answer on your phone. You can also select the amount of time that the phone delays before forwarding.

• Forward when unreachable: allows you to forward voice calls to a designated number instead of your voicemail number when you are not in an area covered by your service provider or when your phone is switched off.

Follow on-screen instructions to enter forwarding numbers for the selected option.

To access the Call settings menu:

• From the Home screen, tap the Phone icon, then the Menu icon, then Settings, then Call.

– or –

• From the Home screen, tap Apps, then Settings (gear icon), then Call (under Device or a similar category).

When you access the AT&T Address Book, the network backup service, contacts are automatically synchronized between your phone and online address book.

1. From the Home screen, tap Contacts. Your Address Book is displayed.

2. If you have not synchronized your phone with your online AT&T Address Book recently, the AT&T Address Book screen is displayed. Tap Start Sync if you want to synchronize your Address Book.

3. Follow the on-screen instructions.

Your AT&T Address Book is Ready to Use. You can now make a call or send a message through your Address Book.

If you ever upgrade, damage, or lose your phone, you can easily restore your contacts onto your new phone by following these steps:

1. From the Home screen, tap Contacts.

2. Press the Menu icon, then Settings, then Contacts, then AT&T Address Book.

3. At the AT&T Address Book screen, tap Sync Now to synchronize your phone with your online Address Book.

Note: You must first copy any contacts that exist on your SIM card to your phone.

Your phone is synchronized.

4. At the Your AT&T Address Book is Ready for Use prompt, tap OK. Your Contact list is displayed.

Use the following procedure to add a new contact to your Address Book.

Saving a Number from the Home screen:

1. From the Home screen, tap Contacts, then the Add Contact icon (often a plus symbol).

2. At the Save contact to prompt, tap on Device, SIM, or Account name.

3. Tap the image icon and assign a picture to the new entry by choosing one of three options:

• Image: retrieve a previously stored image from your Gallery or from your My files folder and assign it to this entry. Tap an image to assign the image to the contact, then tap Done.

• Tagged pictures: retrieve a previously tagged image from your Gallery.

• Take picture: use the camera to take a new picture and assign it to this entry, then tap Done.

• Remove: although not an option with a new entry, deletes any previously assigned image on an existing contact.

4. Tap the Name field and use the on-screen keypad to enter the full name.

– or –

Tap the arrow next to the Name field to display additional name fields.

5. Tap the Phone number field. The numerical keypad is displayed. The Mobile button initially displays next to the Phone number field. If you want to add a phone number that is not a mobile number, tap the Mobile button and select from the other phone number types.

6. Enter the phone number. Tap the plus icon to add another Phone number field or tap the minus icon to delete a field.

7. Tap Email address. The keyboard is displayed. The Home button initially displays next to the Email field. If you want to add an Email address that is not a Home email address, tap the Home button and select another Email address type.

8. Enter the Email address. Tap the plus icon to add another Email address field or tap the minus icon to delete a field.

9. Tap any of the following fields that you want to add to your new contact:

• Groups: assign the contact to Not assigned, Favorites, ICE – emergency contacts, Co-workers, Family, or Friends.

• Ringtone: adds a field used to assign a message tone that will sound when messages are received from this contact.

• Add another field: tap this button to add additional fields.

10. Tap Save to save the new contact.

When you call automated systems, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses and waits. A pause will stop the calling sequence for two seconds and a wait will pause the calling sequence until you enter a number or press a key.

To add a pause or a wait to an existing Contact:

1. From the Home screen, tap Contacts, and then tap the name or number to open the Contact.

2. Tap the Edit icon (often a pencil).

3. Tap the phone number field.

4. Tap the screen at the position where the pause or wait needs to be added.

5. Tap ‘Sym’ on the keyboard.

6. Tap Pause to add a two-second pause or tap Wait to add a wait, and use the keypad to enter the additional numbers. A pause will be displayed as a comma (,) and a wait will be displayed as a semi-colon (;).

7. Tap Save to save your changes, or tap Cancel to discard.

When editing an existing contact, you can tap a field and change or delete the information, or you can add additional fields to the contact’s list of information.

1. From the Home screen, tap Contacts.

2. Tap the Contact that you want to edit.

3. Tap the Edit icon (often a pencil).

4. Tap any of the fields to add, change, or delete information.

5. Tap Save to save the edited information.

You can store phone numbers and their corresponding names onto your SIM card and phone’s onboard memory. The two locations are physically separate but are used as a single entity, called the Address Book.

1. From the Home screen, tap Contacts.

2. Within the Contacts list (sorted alphabetically), tap a letter on the right side of the display to quickly jump to the contacts beginning with that letter. Alternatively, use the Search field.

3. Tap the contact you wish to call or message.

4. Tap the phone icon to make a phone call or tap the message icon to send a message.

Tip: From the Contact list, sweep right over a listing to make a call. Sweep left over a listing to send a message.

This device can synchronize with multiple accounts. When you synchronize, each account creates a separate contact entry. You can link these entries to view all information in one record.

1. From the Home screen, tap Contacts.

2. Tap a contact name (the name you want to link to another entry). Note: typically this is the same contact with a different name or account information.

3. Press the Menu icon, then tap Link contacts. The contact list is displayed.

Note: Only contacts stored on your phone can be linked.

4. Tap the second contact entry (the entry in which to link) to create a checkmark.

5. Tap Done. The second contact is now linked with the first and the account information is merged into one screen.

6. Tap the link icon to view the contact information you joined. The contacts and information displays with an icon next to the contact name to indicate what type of account information is contained in the entry.

Note: The information is still maintained in both entries, but displays in one record for easier viewing when you link the contacts.

1. From the Home screen, tap Contacts.

2. Tap a contact name (the account name from which you want to unlink an entry).

3. Tap the link icon.

4. Tap the minus sign next to entry in which you want to unjoin.

5. At the Separate contact prompt, tap OK. The contact is now separated and no longer displays in the merged record screen.

When you use messaging type applications, the application needs to know which information is primary (default) in a contact entry list.

1. From the Home screen, tap Contacts.

2. Tap a Contact name.

3. Press the Menu icon, then tap Mark as default. The Mark as default screen displays radio buttons next to the contact names or phone numbers of all the linked contacts. The radio button next to the default contact will be green.

4. To change the default contact, tap the radio button next to another entry that you want to be the default. The radio button will turn green, then tap Save.

From the Accounts menu you decide if you want applications to synchronize, send, and receive data at any given time, or if you want the applications to synchronize automatically.

1. From the Home screen, tap Contacts.

2. Press the Menu icon, then Settings, then Contacts then tap Accounts.

3. Tap an account that you would like to synchronize.

4. At the Sync settings screen, tap the options that you would like to synchronize for that account.

5. Tap Sync now to synchronize the account. The account is synchronized.

6. Press the Back key to return to the Contacts list.

Note: You can also synchronize your accounts using the main Settings menu.

You can access Address Book options while at the main Address Book page or while in the details page for a specific entry.

Options in Address Book (from the main Contacts list, press Menu icon):

1. From the Home screen, tap Contacts then press the Menu icon.

2. The following options are displayed:

• Select: allows you to select entries by placing a check mark alongside a desired entry.

• Delete: allows you to delete one or more of your selected contacts.

• Business cards: allows you to create new business cards or access previously photographed business cards. Tap the Plus icon then the Camera icon to begin framing and then photographing a new business card. This process automatically imports that information and updates either an existing contact or creates a new one.

• SIM Management: allows you to copy contacts from your phone to your SIM card or from your SIM card to your phone. You can also delete contacts from your SIM.

• Speed dial: allows you to set up speed-dialing.

• Send message or email: allows you to send a text/picture message or an email using your Google account.

• Link contacts: allows you to link the current contact to another current contact.

• Settings: allows you to configure where you access either Call or Contacts settings.

– Call: provides quick access to the Phone settings menu.

– Contacts: provides access to Contacts options such as Import/Export, Contacts to display, etc.

• Help: provides an on-screen Help file that covers most high level topics for Contacts.

1. From the Home screen, tap Contacts.

2. Tap a contact and at the contact’s display screen, press the Menu icon.

3. The following options are displayed:

• Delete: allows you to delete the currently active entry.

• Link contacts: allows you to link the current contact to another current contact.

• Unlink contacts: allows you to unlink contacts that have been linked. This option only appears if the contact has been linked.

• Mark as default: allows you to mark one entry in a contact record to use as the default.

• Speed dial: allows you to assign this contact to your speed dial list.

• Share name card: allows you to send contact information as an attachment using various applications.

• Send contact information: allows you select specific elements of an existing contact (name, Mobile number, email, etc.) and send them to a recipient via a text message. This option does not send the entire Contact entry but only selected elements.

• Add to reject list: allows you to add an entry’s number to the reject list.

• Add shortcut to home screen: adds a shortcut to the current Contacts entry to an available screen location.

1. From the Home screen, tap Contacts, then the Groups tab/icon.

2. Tap the Contact that you want to add to a group.

3. Tap the Edit icon (often a pencil).

4. Tap Groups.

5. Tap the group that you would like to add the contact to. You may select as many groups as you like.

6. Tap Save.

7. After returning to the main edit screen, tap Save again. The contact is added to the group.

1. From the Home screen, tap Contacts, then the Groups tab/icon.

2. Tap a group entry.

3. Press the Menu icon, then tap Remove from group.

4. Tap all of the contacts you want to remove from this group. A green checkmark will appear next to their name.

5. Tap Done. The contacts are now removed from the group.

1. From the Home screen, tap Contacts, then the Groups tab/icon, then the Create group icon (often a plus symbol with a group silhouette).

2. Tap the Group name field and use the on-screen keypad to enter a new group name.

3. Tap Group ringtone to choose a ringtone for assignment to this new group. Tap a ringtone to hear how it sounds, then tap OK. – or – Tap Add to select a ringtone from your music files.

4. Tap Group message tone to choose an alert tone for assignment to this new group, then tap OK.

5. Tap Group vibration pattern to choose a vibration audio file for assignment to this new group, then tap OK. – or – Tap Create and follow the on-screen instructions to create your own vibration pattern.

6. Tap Add member to add contacts to the new group.

7. Tap each contact you want to add to create a checkmark. You can also tap Select all.

8. Tap Done.

9. Tap Save to save the new Group category.

To edit a Group entry, there must be at least one member as part of the selected group.

1. From the Home screen, tap Contacts, then the Groups tab/icon.

2. Tap a group entry.

3. Press the Menu icon, then tap Edit group.

4. Make modifications to the Group name, Group ringtone, Group message tone, or Group vibration pattern fields.

5. Tap Add member to add more contacts to this group.

6. Tap Done.

7. Tap Save to save the edited Group category.

Once you have stored phone numbers in the Address Book, you can add them to your Favorites list.

From the Home screen, tap Contacts, then the Favorites tab/icon.

1. From the Home screen, tap Contacts, then the Favorites tab/icon.

2. Press the Menu icon, then tap Add to favorites.

3. When the Contacts list is displayed, tap a contact that you want to add to your favorites list. You may select more than one.

4. Tap Done.

5. A gold star will appear next to the contact image in the Address Book.

1. From the Home screen, tap Contacts.

2. Within the Contacts list, tap a contact that you want to remove from your favorites list. Contacts in your Favorites list will have a gold star.

3. Tap the gold star on the top of the display.

4. The gold star will change to a white star and the contact is removed from your Favorites list. The gold star will no longer appear next to the contact image in the Address Book.

Note: When storing an Address Book entry into the SIM card, only the name, phone number, and email address are available as fields. Also, if you move the SIM card to another phone that does not support additional fields on the SIM card, this additional information may not be available.

1. From the Home screen, tap Contacts, then the Menu icon, then SIM Management.

2. Tap Copy contacts to SIM.

The phone then displays a list of your current phone contacts.

3. Tap the contacts to place a checkmark adjacent to those entries you wish to have copied to the SIM card.

• Repeat this step for all individual entries you wish copied to the SIM or tap Select all to place a checkmark alongside all entries.

4. Tap Done to copy.

5. At the Copy to SIM display, tap OK. The selected numbers are copied to the SIM card.

1. From the Home screen, tap Contacts, then the Menu icon, then SIM Management.

2. Tap Copy contacts from SIM.

3. At the Create contact under account prompt, tap on Device or an account name that you would like to copy the contact to. The phone then displays a list of your current contacts stored on your SIM card.

4. Tap the contacts to place a checkmark adjacent to those entries you wish to have copied to your phone.

• Repeat this step for all individual entries you wish copied to your phone or tap Select all to place a checkmark alongside all entries.

5. Tap Done to copy. The selected numbers are copied.

1. From the Home screen, tap Contacts, then the Menu icon, then SIM Management.

2. Tap Delete contacts from SIM. The phone then displays a list of your current SIM contacts.

3. Tap the contacts to place a checkmark adjacent to those entries you wish to have deleted from the SIM card.

• Repeat this step for all individual entries you wish copied to the SIM or tap Select all to place a checkmark alongside all entries.

4. Tap Delete.

5. At the Delete Contacts from SIM prompt, tap OK. The selected numbers are deleted from the SIM card.

You can delete Phone or SIM entries from your phone’s memory.

1. From the Home screen, tap Contacts.

2. Within the Contacts list, touch and hold a contact that you want to delete.

3. Tap Delete on the displayed list.

4. At the Delete prompt, tap OK to delete the contact or Cancel to exit.

Important! When creating a message, adding an image, a sound file, or a video clip to a text message changes the message from a text message to a multimedia message.

1. From the main Home screen, tap Messaging, then the Compose icon.

Note: The main Home screen initially contains the Messaging icon. If you delete it, or if you want to access Messaging from another Home screen, you must tap Apps, then Messaging.

2. Tap on the Enter recipients field to manually enter a recipient or tap the Add recipient icon to select a recipient from your Contacts. You can also select the recipient based on Groups, Favorites, or Logs.

3. If adding a recipient from your Contacts, tap the contact to place a checkmark then tap Done. The contact will be placed in the recipient field.

Note: For the Group option, if the number of recipients is less than 10, all members in the group will be added. You will need to delete any unnecessary members in the list by selecting the trash can icon and deleting unwanted entries.

Note: Enter additional recipients by separating each entry with a semicolon (;) then using the previous procedure.

4. Tap the Enter message field and use the on-screen keypad to enter a message.

5. Add more recipients by tapping the recipient field.

6. Tap the Add emoticons icon to choose an available emoticon from an on-screen list and then add it into your message (at the cursor location) if desired.

7. Review your message and tap Send.

Note: If you exit a message before you send it, it will be automatically saved as a draft.

1. From the main Home screen, tap Messaging.

2. Before composing a message, press the Menu icon to reveal additional messaging options:

• Select: allows you to select desired messages.

• Delete: deletes the entire message and its bubbles.

• Draft messages: displays the draft messages folder and its contents.

• Locked messages: displays the locked messages folder and its contents.

• Scheduled messages: displays the scheduled messages folder and its contents.

• Spam messages: displays the spam messages folder and its contents.

• Font size: allows you to configure the font size in use within your Messages application.

• Settings: allows you to access Messaging settings.

• Help: allows you to get online help.

1. While composing a message, press the Menu icon to reveal additional messaging options.

• View contact: displays the Contact’s Overview page. This option only displays if the message sender is in your contacts list.

• Add to contacts: allows you to add the recipient as a new Contacts entry. This option only displays if the recipient is not already in your Contacts list.

• Quick responses: displays your available preset text message reply templates.

• Add recipient: allows you to add another recipient to the message.

• Insert smiley: allows you to add insert smiley icons images (emoticons).

• Preview (only in MMS): allows you to add preview the MMS message prior to delivery.

• Add slide: converts an SMS message into an MMS (Multimedia) message and allows you to attach an existing slideshow.

• Schedule message: allows you to schedule a time for the current message to be delivered.

• Duration (5 sec) (only in MMS): allows you to change the duration of the image slideshow.

• Layout (bottom) (only in MMS): allows you to change the layout.

• Add to priority senders: allows you to add the recipient as a priority sender. The recipient will then appear on the priority sender bar. (Note: Priority senders appear at the top of the main Messages screen.)

• Add to spam numbers: allows you to tag a number as spam so that messages from this number will be directly delivered to your spam folder.

• Discard: closes the current open message.

• Font size: allows you to configure the font size in use within your Messages application.

To add an attachment to your message, tap the attachment icon (often a paperclip) and select one of the following options:

• Image: allows you to tap an existing image from your Pictures list to add it to your message.

• Take picture: allows you to temporarily exit the message, take a photo with phone’s camera, and then add it to your message by tapping Save.

• Video: allows you to choose an existing video from the Videos list, then add it to your message.

• Record video: allows you to temporarily exit the message, record a video clip using the phone’s camera, and then add it to your message by tapping Save.

• Audio: allows you to choose an existing audio file from the Audio list, then add it to your message by tapping the circle to the right of the audio so that it turns green, then tapping Done.

• Record audio: allows you to temporarily exit the message and record an audio clip using the phone’s microphone. It is then automatically attached to the message.

• Memo: allows you to add a memo that you have created.

• Calendar: allows you to add an event from your calendar.

• My location: allows you to attach a Google Maps URL location indicating your current location.

• Maps: allows you to attach both a thumbnail and Google maps url link about your current location.

• Contacts: allows you to tap on an existing Address Book entry, then add it to your message by tapping Done.

1. When you receive a new message, the new message icon will appear at the top of your screen.

2. Open the Notification Bar and select the message.

– or –

From the main Home screen, tap Messaging, then tap the new message to view it.

The selected message appears in the display.

3. To play a multimedia message, tap the Play icon.

• To pause playback of the multimedia message, tap the Pause icon.

4. To scroll through the message (if additional text pages have been added), touch the screen and in a single motion, scroll up or down the page.

Sent and received text and picture messages are grouped into message threads.

From the main Messaging screen, touch and hold the message to display the following options:

• Add to spam numbers: adds the current sender to a spam list. Any new texts from this sender are automatically blocked.

• Delete: deletes the currently selected message thread.

Touch and hold the message bubble within an active message conversation to display the following options:

• Delete: deletes any currently selected message bubble from the thread.

• Copy text: copies the currently selected message bubble from the thread.

• Forward: allows you to forward the currently selected message bubble to an external recipient.

• Lock/Unlock: locks or unlocks the currently selected message bubble from being accidentally deleted.

• Copy to SIM: copies the currently selected message bubble as a single text message within the SIM card.

• Share: allows you to share the message with others using various apps.

• View message details: displays details for the currently selected message bubble.

• Report as SPAM: allows you to register the number as spam.

1. From the main Home screen, tap Messaging.

2. Press the Menu icon, then tap Delete.

3. Tap each message you want to delete or tap Select all. A checkmark will appear beside each message you select.

4. Tap Done.

5. At the Delete conversation prompt, tap OK to delete or Cancel to cancel.

1. From the main Home screen, tap Messaging.

2. Tap the Search icon (often a magnifying glass).

3. Use the on-screen keypad to enter a word or phrase to search for, then tap the Search icon on the keypad.

4. All messages that contain the search string you entered are displayed.

To configure the settings for text messages, multimedia messages, Voice mails, and Push messages.

1. From the main Home screen, tap Messaging, then press the Menu icon, then tap Settings.

2. The following Messaging settings are available:

• Default messaging app: field to set your default messaging application.

• Display: alters the display properties for Messages.

– Bubble style: allows you to choose from several bubble styles for your messages. Bubbles are the rounded boxes that surround each message.

– Background style: allows you to choose from several background styles for your messages.

– Change font size: allows you to change the text size by using the up or down volume keys.

• Quick responses: allows you to edit or add new quick responses to use in your messaging.

• Text messages: alters the SMS settings.

– Manage SIM card messages: allows you to manage the messages stored on the SIM card.

– Input mode: allows you to set the input mode for your text messages. Choose from: GSM Alphabet, Unicode, or Automatic.

– Message center: allows you to enter the number of your message center where your messages reside while the system is attempting to deliver them.

• Multimedia messages: alters the MMS settings.

– Group conversation: allows you to send a single message to multiple recipients.

– Delivery reports: when this option is activated, the network informs you whether or not your message was delivered.

– Auto retrieve: allows the message system to automatically retrieve messages.

– Set restrictions: allows you to select the creation mode. Choose from Restricted (you can only create and submit messages with content belonging to the Core MM Content Domain), Warning (the device will warn you via pop up messages that you are creating a multimedia message which does not fit the Core MM Content Domain), Free (you may add any content to the message.)

– MMS alert: alerts you when the messaging modes changes from an SMS (text) to MMS (multimedia) mode.

• Delete old messages: deletes old messages when the limit is reached, rather than overwriting them.

• Priority senders: activates or deactivates the priority sender feature.

• Push messages: allows you to receive push messages from the network.

• Cell broadcast: allows you to receive Cell broadcast messages. Touch and slide the slider to the right to turn it on.

– Select channels: allows you to set up the channel that you will receive CB messages on. You can also select My channel and add your own CB channel using the Add channel option below.

– Add channel: allows you to add your own CB channel.

• Notifications: allows you to see message notifications on your status bar.

• Emergency alerts: allows you to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS).

– Emergency alerts (sub-option): allows you to set the alert types that you wish to receive.

– Emergency notification preview: allows you to play the emergency alert tone so you will know what to expect when an alert is received.

– Alert reminder: allows you to set reminders after you receive an alert. You can select Once, Every 2 minutes, Every 15 minutes, or Off (default).

• Signature: configures message signatures. Touch and slide the slider to the right to turn it on.

– Edit signature: allows you to enter a desired signature for your message.

• Spam filter: when enabled, allows you to configure available spam settings such as:

– Add to spam numbers: allows you to manually enter and assign a phone number as being sent from a spam source.

– Add to spam phrases: allows you to assign a specific text phrase as belonging to a spam message. Ex: Dear friend.

– Block unknown senders: when active, automatically blocks incoming messages from unknown sources or blocked numbers.

• Delay message sending: allows you to set a time delay limit that determines how long the messages are held until they are sent. This can allow you to cancel the delivery of a recent message.

• Safe mode: allows you to set security parameters for Messages. Choose from Allow access to all links and Potential threat alerts.

This device is designed to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS). There are three types of Emergency Alerts:

• Alerts issued by the President

• Alerts involving imminent threats to safety of life (Extreme and Severe)

• AMBER Alerts (missing child alert)

Note: Alerts issued by the President can not be disabled.

Customers may choose not to receive Imminent Threats (Extreme and Severe) and AMBER Alerts. To disable Imminent Threats and AMBER Alerts, follow the instructions below:

1. From the main Home screen, tap Messaging.

2. Press the Menu icon, then Settings, then Emergency alerts.

3. Tap Emergency alerts (the heading itself).

4. All alerts are enabled by default (checkmark showing). Tap on an alert option (e.g., Imminent Threats, AMBER Alerts) to disable the alert and remove the checkmark.

From any Home screen, tap Apps, then Settings (gear icon).

If you are not sure exactly where to find a certain setting, you can use the Setting search feature.

1. From the main Settings screen, tap the Search icon (magnifying glass).

2. Enter a word or words in the Search box. As you type, settings that match will appear on the screen.

3. Tap an entry to go to that setting.

Note: If the word you entered does not find any matches, No results found will be displayed.

Quick settings are all of the settings that you most frequently use. To modify the Quick settings display with your most frequently used settings, follow these steps:

1. From the main Settings screen, tap the Menu icon, then Edit quick settings.

2. Scroll thru all of the settings and tap the settings icons that you want in your Quick settings menu. The settings that are already in the Quick settings menu are highlighted. Tap a highlighted item to remove it from the Quick settings menu.

3. Tap Save to save your new Quick settings menu.

Smart network switch allows your device to automatically switch between a Wi-Fi network and a mobile network.

1. From the main Settings screen, tap Wi-Fi.

2. Tap Smart network switch to create a checkmark and activate the feature.

1. From the main Settings screen, tap Wi-Fi.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON. The slider will show ON or be green.

3. Your phone will automatically scan for available Wi-Fi networks.

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection.

1. From the main Settings screen, tap Wi-Fi.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON.

3. Tap the Menu icon, then Wi-Fi Direct.

The advanced Wi-Fi settings allow you to set up and manage wireless access points.

1. From the main Settings screen, tap Wi-Fi.

2. Tap the Menu icon, then Advanced.

The following options are available:

• Network notification: alerts you when a new WAP is available.

• Passpoint: allows you to connect to passpoint-enabled Wi-Fi Access Points automatically.

• Sort by: allows you to sort by Alphabet or Signal strength.

• Keep Wi-Fi on during sleep: allows you to specify when to disconnect from Wi-Fi.

• Always allow scanning: allows the Google location service and other apps to scan for networks, even when Wi-Fi is turned off.

• Auto connect: allows you to be automatically connected to an AT&T Wi-Fi Hotspot as soon as your phone detects it.

• Install certificates: allows you to install security certificates that you have on a MicroSD card.

• MAC address: view your device’s MAC address, required when connecting to some secured networks (not configurable).

• IP address: view your device’s IP address.

In this menu you can activate Bluetooth, view or assign a device name, activate your phone so other Bluetooth devices can discover it, or scan for other, available Bluetooth devices with which to pair.

Activating Bluetooth:

1. From the main Settings screen, tap Bluetooth.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth ON. The Bluetooth icon is displayed on the status bar.

3. Your phone automatically scans for nearby discoverable devices. After scanning, tap a device to pair with it.

Configure Bluetooth settings:

4. Tap the Menu icon and select a Bluetooth setting to configure:

• Visibility timeout: use this setting to control when to automatically turn off the Discoverable option: 2 minutes, 5 minutes, 1 hour, or Never time out.

• Received files: shows the list of files received by using Bluetooth.

• Rename device: allows you to rename your device.

• Help: provides additional information on Bluetooth and Bluetooth settings.

5. Tap the checkbox next to your phone’s name (e.g., SAMSUNG-SM-G870A) if you do not want your phone visible to other Bluetooth devices (this toggles discoverability).

This option allows you to share your phone’s mobile data connection via USB.

1. From the main Settings screen, tap Tethering and Wi-Fi hotspot.

2. Connect your phone to your PC using a USB cable.

3. Tap USB tethering to add a checkmark and activate the feature. The USB tethering icon is displayed at the top of your screen.

Note: To enable Wi-Fi Hotspot on your phone, you may need to contact your service provider or set up the service through their portal.

1. From the Home screen, tap Apps, then Mobile Hotspot. Or from the main Settings screen, tap Tethering and Wi-Fi hotspot.

2. Turn Mobile Hotspot on by tapping the slider so that it changes to the ON position. The Mobile Hotspot icon is displayed at the top of your screen.

3. Tap Configure at the bottom of the screen.

4. Enter or edit the Network SSID, Hide my device, Security setting, and Password.

5. Tap Show password and Show advanced options to see them displayed.

6. Tap Save.

7. Tap the Menu icon for the following option:

• Timeout settings: allows you to set the time your device will be available as a portable Wi-Fi hotspot.

Connecting to your Wi-Fi hotspot from other devices:

1. Activate Wi-Fi on the device that wants to connect to your phone.

2. Find your phone’s hotspot name (e.g., Galaxy S5 ACTIVE XXXX) in the Wi-Fi network list and connect to it. XXXX are four randomly generated digits that will appear when you set up a Portable Wi-Fi hotspot on your device.

The connected device can now use internet through your Portable Wi-Fi hotspot.

Note: Activating Wi-Fi and connecting to your phone will be different depending on the type of the other device.

Airplane mode allows you to use many of your phone’s features, such as Camera, Games, and more, when you are in an airplane or in any other area where making or receiving calls or data is prohibited.

Important! When your phone is in Airplane Mode, it cannot send or receive any calls or access online information or applications.

1. From the main Settings screen, tap Airplane mode.

2. Tap the ON/OFF slider to turn it ON. The Airplane mode icon is displayed at the top of your screen.

From this screen you can view your Mobile data usage and turn your Mobile data capability On or Off.

1. From the main Settings screen, tap Data usage.

2. Tap Mobile data to create a checkmark and turn Mobile data usage on.

3. Tap Set mobile data limit to create a checkmark and allow a data limit to be set.

4. Touch and drag the orange limit bar to the GB limit that you desire.

5. Tap the Data usage cycle drop-down menu and select a date. The data usage displays as a visual (chart) and also displays a list of each application with a breakdown of how much data was used per application.

Note: Data is measured by your device. Your service provider may account for data usage differently.

6. Tap the Menu icon to display additional options. Tap to activate.

• Data roaming: enables data roaming on your device.

• Restrict background data: restricts some apps and services from working unless you are connected to a Wi-Fi network.

• Auto-sync data: allows your accounts to automatically sync

• Show Wi-Fi usage: displays a Wi-Fi tab that shows Wi-Fi usage.

• Mobile hotspots: displays available mobile hotspots.

The Location settings allow you to set up how the phone will determine your location and the sensor settings for your phone.

1. From the main Settings screen, tap Location.

2. The menu is separated into various sections:

• Mode: allows you to choose a location mode. Each mode enables different technologies and affects both the accuracy of the location and battery usage.

• Recent location requests: displays services that have recently requested your location information.

• Location services: allows you to save up to 100 most recent locations.

• My places: allows you to add location information for your Home, Work, and Car.

This option displays additional Connectivity information.

From the main Settings screen, tap More networks. Options display for Airplane mode, Mobile networks, Tethering and portable hotspots, and VPN.

This option allows you to set the default messaging app that you can use to send all of your messages.

From the main Settings screen, tap More networks, then Default messaging app and make a selection.

To enable data access over the mobile network, this option must be selected. It is set on by default.

1. From the main Settings screen, tap More networks, then Mobile networks.

2. Tap Mobile data to create a checkmark and activate the feature.

Data roaming allows you to connect to your service provider’s partner networks and access data services when you are out of your service providers area of coverage.

1. From the main Settings screen, tap More networks, then Mobile networks.

2. Tap Data roaming to create a checkmark and activate the feature.

To use Wi-Fi you need access to a wireless access point (hotspot). For mobile data, APNs are usually configured automatically.

1. From the main Settings screen, tap More networks, then Mobile networks.

2. Tap Access Point Names. A list of the Access Point names display. The active access point displays a green, filled circle to the right of the name.

Using this feature you can view the current network connection. You can also scan and select a network operator manually, or set the network selection to Automatic.

1. From the main Settings screen, tap More networks, then Mobile networks.

2. Tap Network operators. The current network connection displays at the bottom of the list.

Important! You must deactivate data service prior to searching for an available network.

Note: Connecting to 2G networks slows the data transfer speed and time.

Default setup options:

Your phone default is set to Automatic (to automatically search for an available network). You can set this option to Manual to select a network each time you connect.

1. From the main Settings screen, tap More networks, then Mobile networks.

2. Tap Network operators.

3. Tap Default setup.

4. Tap Manual to locate and connect to a network manually, or tap Automatic to allow the device to automatically select a network.

Important! Before you can use a VPN you must establish and configure one. You must first set up a screen unlock PIN or password.

1. Before using VPN, you must first set up a screen unlock PIN or password.

2. From the main Settings screen, tap More networks, then VPN.

3. Tap Basic VPN.

4. Tap the Plus icon (Add VPN network).

5. Enter a name for the VPN network in the Name field.

6. Select a VPN type from the Type drop-down menu.

7. Enter the Server address and any other required fields that are dependent upon the Type you entered previously.

8. Tap the PPP encryption (MPPE) check box to enable encryption if required.

9. Tap the Show advanced options check box to display additional VPN options if needed.

10. Tap Save to save your VPN settings.

Important! Before you can use a VPN you must establish and configure one. You must first set up a screen unlock PIN or password.

1. Before using VPN, you must first set up a screen unlock PIN or password.

2. From the main Settings screen, tap More networks, then VPN.

3. Tap Advanced IPsec VPN.

4. Tap the Plus icon (Add IPsec VPN network).

5. Enter a password, confirm the password, and tap OK.

6. Enter a name for the VPN connection in the VPN connection name field.

7. Select an IPsec connection type from the drop-down menu.

8. Enter any other required information.

9. Tap Show advanced options to display additional VPN options if needed.

10. Tap Save to save your VPN settings.

NFC (Near Field Communication) allows data exchange when you touch your device with another compatible device. This is used for applications such as Android Beam and S Beam.

1. From the main Settings screen, tap NFC.

2. Tap the ON/OFF slider, located to the right of the NFC field, to turn NFC ON. The slider will show ON or be green.

When Android Beam is activated, you can beam app content to another NFC-capable device by holding the devices close together. You can beam browser pages, YouTube videos, contacts, and more.

1. From the main Settings screen, tap NFC, then Android Beam.

2. Tap the OFF / ON icon to turn Android Beam ON. The icon will show ON or be green.

3. Touch the back of your device with another NFC-capable device and the content is transferred.

When S Beam is activated, you can beam files to another NFC-capable device by holding the devices close together. You can beam images and videos from your Gallery, music files from your Music app, and more.

1. From the main Settings screen, tap NFC, then S Beam.

2. Tap the OFF / ON icon to turn S Beam on. The icon will show ON or be green.

3. Touch the back of your device with another NFC-capable device and the content is transferred.

Tap and pay allows you to select the default payment application you want to use for making on-phone purchases.

1. From the main Settings screen, tap NFC, then Tap and pay.

2. Select the app that you want as your default.

This option allows you to share your media files with nearby devices using DLNA and connected to the same Wi-Fi.

1. Connect to a Wi-Fi network.

2. From the main Settings screen, tap Nearby devices.

3. Tap the OFF / ON icon to turn Nearby devices on. The icon will show ON or be green.

4. Verify the Nearby devices icon appears at the top of the screen in your status bar.

5. Tap Shared contents, then check the media you would like to share. Tap OK.

6. Tap Allowed devices, then select the connected devices you would like to allow.

7. Tap Denied devices, then select the connected devices you would like to not allow.

8. Tap Download to, then select the destination of any downloaded (shared) content. Choose from Device or SD card.

9. Tap Download from other devices, then select the actions you’ll take when you download content from other devices. Choose from either Always accept, Always ask, or Always reject.

With the Printing option, you can set your device to print on compatible Samsung Wi-Fi printers or other supported printers via plugins.

1. From the main Settings screen, tap Printing.

2. If you have a Samsung printer, tap Samsung Print Service Plugin. – or – If you have an HP printer, tap HP Print Service Plugin. You may need to download other print service plugins for other printer brands.

3. Tap the ON/OFF slider, to turn Printing ON for that plugin. The slider will show ON or be green. Your device will search for compatible printers.

4. Follow the on-screen instructions.

5. Tap the Menu icon for additional options if available.

The Screen Mirroring feature allows you to share the media files on your device screen with an HDMI device such as an HDMI TV.

Note: This feature may require an optional AllShare Cast dongle or similar accessory.

1. From the main Settings screen, tap Screen Mirroring.

2. Tap the ON/OFF slider, to turn on. The slider will show ON or be green.

3. Connect the AllShare Cast dongle (or similar device) to the HDMI device using an HDMI A-to-A cable.

4. Tap Scan to scan for available devices.

Sound mode allows you to select Sound, Vibrate, or Mute to be used for all sounds.

1. From the main Settings screen, tap Sound, then Sound mode.

2. Select the option that you would like to use for all of your sounds (e.g., Sound, Vibrate, Mute).

The Volume option allows you to change the volume for all phone sounds in one easy location.

1. From the main Settings screen, tap Sound, then Volume.

2. Touch and drag the sliders to adjust the sound volume for the various options (e.g., Ringtone, Media, Notifications, System).

3. Tap OK.

Vibration intensity allows you to select how intense the vibration is for different options.

1. From the main Settings screen, tap Sound, then Vibration intensity.

2. Touch and drag the slider to adjust the Vibration intensity for the various options.

Music effects allows you to set the Music effects control panel that will be used when you play music on your phone.

1. From the main Settings screen, tap Sound, then Music effects.

2. Select the option that you would like to use for your Music effects control panel.

This option allows you to set the ringtone.

1. From the main Settings screen, tap Sound.

2. Tap Ringtones.

3. Tap a ringtone and tap OK. – or – Tap Add to select a file from your music files.

This option allows you to set your phone to vibrate and ring, and choose a vibration pattern.

1. From the main Settings screen, tap Sound.

2. Tap Vibrations.

3. Select a vibration pattern and tap OK. – or – Tap Create and follow the on-screen instructions to create your own vibration.

This option allows you to set the ringtone that will sound for notifications and alarms.

1. From the main Settings screen, tap Sound.

2. Tap Notifications.

3. Tap a ringtone and tap OK.

This option allows you to enable your phone to vibrate whenever it rings.

1. From the main Settings screen, tap Sound.

2. Tap Vibrate when ringing to create a checkmark and enable the feature.

The System tone settings are used when you use the dialing pad, make a screen selection, lock your screen, or tap the screen.

1. From the main Settings screen, tap Sound.

2. Tap any of the following options to create a checkmark and activate the feature:

• Dialing keypad tone: makes a sound when you tap a key on the keyboard.

• Touch sounds: makes a sound when you touch the screen.

• Screen lock sound: makes a sound when your screen is locked or unlocked.

• Haptic feedback: makes a vibration when you tap soft keys and on certain UI interactions.

The Samsung keyboard sound settings are used when you use the dialing pad, make a screen selection, lock your screen, or tap the screen.

1. From the main Settings screen, tap Sound.

2. Tap any of the following options to create a checkmark and activate the feature:

• Sound when tapped: makes a sound when you tap a key on the Samsung keyboard.

• Vibrate when tapped: makes a vibration when you tap a key on the Samsung keyboard.

This section describes how to modify sound settings associated with several frequently used apps.

1. From the main Settings screen, tap Sound.

2. Tap one of the following apps to access the settings:

• Call: allows you to modify settings for call alerts, ringtone and sound settings, and Voicemail sound settings.

• Messaging: allows you to modify settings for the Messaging app.

• Email: allows you to modify settings for your Email accounts.

• Calendar: allows you to modify settings for event notification in your Calendar app.

3. Follow the on-screen instructions to update your app sound settings.

In this menu, you can change various settings for the display.

From the main Settings screen, tap Display.

The following options display:

• Brightness: configures the LCD Brightness levels. Tap Automatic brightness to allow the phone to self-adjust or drag the slider and tap OK.

• Font: allows you to set the font style and font size that your phone will use. You can also tap Get fonts online to choose from a wider selection.

• Screen rotation: allows you to switch the display orientation automatically when you rotate the phone.

• Smart stay: when activated, your screen stays on as long as you are looking at it.

• Screen timeout: allows you to adjust the delay time before the screen automatically turns off.

• Screen mode: allows you to select from several different screen modes that affect the color and sharpness of your display.

• Auto adjust screen tone: allows you to save power because the phone analyzes the displayed screen image and adjusts the LCD brightness.

• Daydream: allows you to control what your screen does when your device is docked or sleeping. Tap the OFF / ON icon next to Daydream to turn it on. Follow the on-screen instructions.

• LED indicator: allows you to set up how your LED lights can be used as indicators. Tap the features that you want activated to create a checkmark.

• Increase touch sensitivity: allows you to adjust the touch sensitivity of your phone automatically depending on the type of material on the display.

You can change the Wallpaper (background) of your home and lock screens by following these steps:

1. From the main Settings screen, tap Wallpaper.

2. Select the screen or screens that you would like to modify. Select Home screen, Lock screen, or Home and lock screens.

3. Scroll through the wallpaper thumbnails located at the bottom of the screen. Tap the one you want.

4. It is displayed on your screen.

5. Tap Done.

The new wallpaper is saved.

Home screen settings allows you to change the Transition effect of your Home screen and also set how your My Magazine updates are displayed.

1. From the main Settings screen, tap Home screen.

2. Tap Transition effect and select an option.

3. If you want to view all of your My Magazine updates in one place on the Home screen, tap to create a checkmark and activate the feature.

Choose settings for unlocking your screen.

1. From the main Settings screen, tap Lock screen.

2. Tap Screen lock for these options then follow the on-screen instructions to set up your Screen lock:

• Swipe: Swipe the screen to unlock it.

• Pattern: A screen unlock pattern is a touch gesture you create and use to unlock your device. Follow the prompts to create or change your screen unlock pattern.

• PIN: Select a PIN to use for unlocking the screen.

• Password: Create a password for unlocking the screen.

• None: No pattern, PIN, or password is required. The screen will never lock.

Activate or deactivates various Unlock screen functions.

Note: The Lock screen options will differ depending on what type of Screen Lock you have selected in step 2.

1. From the main Settings screen, tap Lock screen.

2. The following options are available depending on the Screen Lock type that you have selected:

• Dual clock displays a dual clock on your lock screen when roaming.

• Clock size allows you to select the size of the clock that will appear on your lockscreen.

• Show date displays the date on your lockscreen.

• Camera shortcut displays a camera shortcut icon on your lockscreen.

• Owner information displays information about you, that you want to be displayed on the lockscreen.

• Unlock effect sets the effect you receive when unlocking the phone.

• Additional information displays Weather on Walking mate (from S Health app) information on your lockscreen.

• Help text shows help information on the Lock screen (Swipe option only).

• Make pattern visible allows you to see the pattern as you draw it (Pattern and Fingerprint options only).

• Vibration feedback causes your phone to vibrate if you enter a wrong pattern (Pattern and Fingerprint options only).

• Secured lock time allows you to set a time-out for lock screen. (Pattern, Fingerprint, Pin, and Password options only)

The Multi window feature allows you to run multiple applications on the current screen at the same time.

1. From the main Settings screen, tap Multi window.

2. Tap the ON/OFF slider, located to the right of the Multi window field, to turn it on.

3. Tap Open in multi window view to create a checkmark if you want to automatically have Multi window activated whenever you open files from My Files, Video, or any attachments from emails or messages.

4. Tap Tray position and select the side of the screen that you would like the Multi window tray to be located (Left or Right).

5. From any screen, press and hold the Back key to show or hide the multi window tray.

The Notification panel includes a pull-down list to show information about processes that are running, recent notifications, and alerts.

1. From the main Settings screen, tap Notification panel.

2. For more information, refer to “Notification Panel” on page 37.

This feature allows you to customize a quick access feature that hold up to five frequently used application shortcuts. Once activated, this on-screen button can be placed anywhere. This button appears atop off current screens and can only be disabled via either the Notifications Panel or via the Toolbox screen.

Important! There can only be at most five applications assigned to the quick access Toolbox button.

To activate the Toolbox:

1. From the main Settings screen, tap Toolbox.

2. In a single motion touch and slide the Toolbox slider to the right to turn it on. The slider color indicates the activation status. When activated, the Toolbox access button appears on the current screen.

– or –

1. From the Notification panel, tap (Open Grid view) to display additional functions.

2. Toggle on the Toolbox activation button (turns green).

1. From the main Settings screen, tap Toolbox.

2. In a single motion touch and slide the Toolbox slider to the right to turn it off.

– or –

1. From the Notification panel, tap (Open Grid view) to display additional functions.

2. Toggle off the Toolbox activation button (turns grey).

1. From the active Toolbox screen, tap Edit.

2. Place a check mark alongside up to five applications. These will be quickly accessible via the on-screen button.

3. Tap Save once you have completed the assignment of your applications.

The one-handed operation settings help you to use your phone keypads easily with only one hand.

1. From the main Settings screen, tap One-handed operation.

2. Tap the OFF / ON icon next to One-handed operation to the right to turn it on.

To activate One-handed operation:

Complete the set up process by grabbing the device in one hand and then in a single motion, swipe your thumb from the edge of the screen towards the middle and then back.

To deactivate One-handed operation:

Tap Resume Normal View to return to normal view.

This application allows you to see your display using the default layout or provide an easier user experience for the first-time smartphone users using Easy mode.

1. From the main Settings screen, tap Easy mode.

2. Tap the OFF / ON icon next to Easy mode to the right to turn it on.

3. Applications that are affected by Easy mode are checked. Tap any application to uncheck if you want the standard display for that application.

Accessibility services are special features to make using the device easier for those with certain physical disabilities. Use the Accessibility settings to activate these services.

Note: You can download accessibility applications from Play Store and manage their use here.

1. From the main Settings screen, tap Accessibility.

2. The following options are available:

• Vision:

– TalkBack: activate the TalkBack feature. TalkBack, when installed and enabled, speaks feedback to help blind and low-vision users.

– Dark screen: allows you to keep your screen turned off at all times until you double press the Power key to turn the feature off. The TalkBack feature must be enabled.

– Rapid key input: allows you to release your finger rather than double tapping to enter a selection when using the TalkBack feature.

– Speak passwords: reads out password information. The TalkBack feature must be enabled.

– Font size: change the size of the fonts used on the device within menus, options, etc. Choose from: Tiny, Small, Normal, Large, or Huge.

– Magnification gestures: use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen.

– Notification reminder: plays a beep when you have unread notifications. Touch and slide the slider to the right to turn it on.

– Negative colors: reverse the display of on-screen colors from White text on a Black background to Black text on a White background.

– Color adjustment: allows you to adjust the display colors if you are color blind and have difficulty reading the display because of the colors. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

– Accessibility shortcut: allows you to quickly enable accessibility features in 2 quick steps. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

– Text-to-speech options: allows you to adjust your text-to-speech settings.

• Hearing:

– Flash notification: allows you to set your camera light to blink whenever you receive a notification.

– Turn off all sounds: allows you to mute every sound made by the device during taps, selections, notifications, etc.

– Hearing aids: allows you to improve the sound quality of your device for use with hearing aids.

– Samsung subtitles (CC): allows you to turn on subtitles when using applicable Samsung apps. Assistant menu: allows you to improve the device accessibility for users with reduced dexterity. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

– Google subtitles (CC): allows you to turn on subtitles when using applicable Google apps. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

– Sound balance: allows you to use the slider to set the Left and Right balance when using a stereo device.

– Mono audio: allows you to enable stereo audio to be compressed into a single mono audio stream for use with a single earbud/earphone.

– Baby crying detector: causes your phone to vibrate when a crying baby is detected.

– Auto haptic: causes your phone to automatically vibrate in response to the sounds of downloadable apps such as games. Some apps do not support this feature.

• Dexterity and interaction:

– Assistant menu: allows you to improve the device accessibility for users with reduced dexterity. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

– Air wake up: allows you to turn on your screen by waving your hand over the device when it is lying face up.

– Smart scroll: once your eyes have been detected, the screen will scroll according to your device’s tilt angle. Tap the slider to the right of the Smart scroll field to activate the feature. With Smart scroll, the screen will scroll depending on the phone’s tilt angle once your eyes have been detected.

– Press and hold delay: allows you to select a time interval for this action. Choose from: Short, Medium, Long, or Custom.

– Interaction control: allows you to enable or disable motions and screen timeout. You can also block areas of the screen from touch interaction. Touch and slide the slider to the right to turn it on. Follow the on-screen instructions.

• Direct access: allows you to open the Accessibility settings by pressing the Home key 3 times in quick succession. Select the settings that you want to open to create a checkmark.

• Answering and ending calls: allows you to set up the manner in which you accept incoming calls. Tap a selection to create a checkmark.

• Single tap mode: allows you to dismiss or snooze alarms, calendar events and timer alerts, and answer or reject incoming calls with a single tap.

• Manage accessibility: save and update your accessibility settings or share them with another device. You can export your settings, import a previously saved file, or share your file with another device.

When Blocking mode is enabled, notifications for selected features will be disabled. You will only receive notifications of incoming calls from people on your allowed list.

1. From the main Settings screen, tap Blocking mode.

2. In a single motion touch and slide the Blocking mode slider to the right to turn it on. Confirm that the Blocking mode active icon appears in the Status bar.

3. Place a green checkmark adjacent to the features that you would like to disable.

4. Configure a timeframe for these features to be active. Remove the checkmark from the Always field to configure the From and To time fields.

5. Tap Allowed contacts to assign those contacts that are exempted from these rules. Choose from None, All contacts, Favorites, or Custom. Allowed contacts will then appear in the Allowed contact list.

This feature allows you to hide personal content from being accessed by anyone else using your device.

1. From the main Settings screen, tap Private mode.

2. Read the information on the Welcome screen and tap Next to view more helpful information.

3. Tap Start.

4. Select an unlock method and complete the associated set up process.

5. Confirm Private Mode active appears in the Notifications area.

To disable Private Mode:

1. From the main Settings screen, tap Private mode.

2. In a single motion touch and slide the slider to the left to turn it off.

With the dedicated Active key, you can quickly launch your favorite application with one touch. You can set up your active key to activate different apps depending on a short press or a long press of the Active key.

1. From the main Settings screen, tap Active key.

2. Tap Short press.

3. Select the app that you want to be activated whenever you short press the Active key.

4. Tap Long press.

5. Select the app that you want to be activated whenever you long press the Active key.

6. If you want to use the Active key to take pictures when your camera is open, tap the Capture with the active key checkbox to create a checkmark.

The Motions and Gestures settings allow you to set up various Motion activation services.

From the main Settings screen, tap Motions and gestures.

Air browse allows you to scroll through pages or go to the next or previous item in a list by moving your hand up and down, or left and right above the sensor located at the middle top of your display.

1. From the main Settings screen, tap Motions and gestures → Air browse.

2. In a single motion touch and slide the slider to the right to turn it on.

3. Tap on the applications that you would like to enable to use the Air browse feature. A checkmark will appear.

4. When using a supported application, move your open hand across the screen to use Air browse.

With the Direct Call feature, your phone will dial the currently displayed on-screen Contact entry as soon as you place the device to your ear.

1. From the main Settings screen, tap Motions and gestures → Direct call.

2. In a single motion touch and slide the slider to the right to turn it on.

Once Smart alert is enabled, you can pickup the device to be alerted and notified if you have missed any calls or messages.

1. From the main Settings screen, tap Motions and gestures → Smart alert.

2. In a single motion touch and slide the slider to the right to turn it on.

Once enabled, you can pause any on-screen video or mute any current sound by simply covering the screen with your hand or turning it over. Once you remove your hand from the screen, the device goes back to normal by either continuing to play the current video or unmuting the current sound.

1. From the main Settings screen, tap Motions and gestures → Air browse.

2. In a single motion touch and slide the slider to the right to turn it on.

3. Tap the following methods that you want to use to Mute/Pause your phone:

• Covering screen with hand: Place your hand on the screen to mute incoming calls and alarms, or to pause media while the screen is on.

• Turning device over: Turn your phone over to mute incoming calls, message alerts, and alarms, or to pause media.

• Smart pause: uses the front camera to detect if you are facing the screen and pauses a video when you look away.

Once enabled, you can capture any on-screen information swiping across the screen. In a single motion, press the side of your hand on the screen and swipe form left to right.

1. From the main Settings screen, tap Motions and gestures → Palm swipe to capture.

2. In a single motion touch and slide the slider to the right to turn it on.

3. You can find the captured screen in the Images section in My Files and in your Gallery.

When Air view is enabled, it displays helpful information when you hover your finger over the screen.

1. From the main Settings screen, tap Air view.

2. The following options are available:

• Information preview: allows you to preview information, extend text, or enlarge pictures by hovering your finger over the screen. In a single motion touch and slide the slider to the right to turn it on.

• Webpage magnifier: allows you to magnify content on webpages by hovering your finger over the screen. In a single motion touch and slide the slider to the right to turn it on.

• Sound and haptic feedback: allows you to play sound and vibrate when hovering your finger over the Air view items. Tap to create a checkmark and activate the feature.

This menu allows you to set up, manage, and synchronize your accounts.

From the main Settings screen, tap Accounts.

1. From the main Settings screen, tap Accounts → Add account.

2. Tap one of the account types.

3. Use the keyboard and follow the prompts to enter your credentials and set up the account. A green circle will appear next to the account type once you have created an account. Your email account will also be displayed in the My Accounts section of the main Accounts menu.

Important! Removing an account also deletes all of its messages, contacts, and other data from the device.

1. From the main Settings screen, tap Accounts.

2. Tap the account which is located in the My Accounts section.

3. Tap the account name.

4. Tap Remove account, then tap Remove account at the prompt to remove the account and delete all its messages, contacts, and other data.

Select the items you want to synchronize on your account such as Books, Calendar, Contacts, and more.

1. From the main Settings screen, tap Accounts.

2. Tap the account which is located in the My Accounts section.

3. Tap the account name.

4. Tap Sync all to synchronize your account or only tap the Sync items that you want to synchronize.

5. Tap Cancel sync to stop the synchronization.

6. Additional settings are available under the account name of each account depending on the type of account. These may include Profile, Terms and conditions, Help, Storage usage, Search, Location, Ads, etc.

The Back up and reset settings allow you to back up your data, back up accounts, automatically restore your phone, and reset your phone settings to the factory settings.

From the main Settings screen, tap Backup and reset.

By setting this option, the Google server will back up all of your settings and data.

1. From the main Settings screen, tap Backup and reset.

2. Tap Back up my data to enable or disable back up of application data, Wi-Fi passwords, and other settings to the Google server.

If you have enabled the Back up my data option, then the Backup account option is available.

1. From the main Settings screen, tap Backup and reset.

2. Tap Backup account and tap your Google Gmail account or tap Add account to set your Google Gmail account to be backed up to the Google server.

By setting this option, when you reinstall an application, all of your backed up settings and data will be restored.

1. From the main Settings screen, tap Backup and reset.

2. Tap Automatic restore to enable or disable automatic restoration of settings from the Google server.

From this menu you can reset your phone and sound settings to the factory default settings.

1. From the main Settings screen, tap Backup and reset.

2. Tap Factory data reset. The Factory data reset screen displays reset information.

3. Tap Reset device, then follow the prompts to perform the reset.

Warning! Performing a Factory data reset will erase all data from your phone and internal SD card, including your Google account, system and application data and settings, and downloaded applications. It will not erase current system software, bundled applications, and external SD card files such as music and photos.

This menu allows you to configure the language in which to display the menus. You can also set on-screen keyboard options.

From the main Settings screen, tap Language and input.

1. From the main Settings screen, tap Language and input → Language.

2. Tap a language from the list.

You can change the keyboard used by your device by following these steps:

1. From the main Settings screen, tap Language and input.

2. Tap Default and select a keyboard. Select Samsung keyboard or Swype.

3. Tap the icon next to the input method that you would like to configure the settings for.

4. Based on your selection of input method, the appropriate settings will appear and are explained below.

From this menu you can set Samsung keyboard options.

1. From the main Settings screen, tap Language and input.

2. Tap the icon next to Samsung keyboard.

3. Set any of the following options:

• Input languages settings are used to setup the language you will be using for input.

– English(US) is the default language. Whatever language you select in the Select input languages option below, will be displayed here.

– Select input languages sets the input language. Tap a language from the available list. The keyboard is updated to the selected language.

• Smart typing settings provide access to additional typing settings.

– Predictive text enables predictive text entry mode. This must be enabled to gain access to the advanced settings. Touch and hold to access the advanced settings. Touch and slide the slider to the right to turn it on.

– Auto replacement automatically completes or replaces the current word with the most probable word match after tapping the space bar or entering a punctuation mark. Touch and slide the slider to the right to turn it on.

– My Shortcuts creates number key shortcuts to enter predefined words or phrases more quickly.

– Auto capitalization automatically capitalizes the first letter of the first word in each sentence (standard English style).

– Auto spacing automatically inserts space between words.

– Auto punctuate automatically inserts a full stop in a sentence by tapping the space bar twice when using the on-screen QWERTY keyboard.

– Keyboard swipe allows you to combine the Samsung keyboard with an additional input method choose from: None leaves text input as only via the on-screen keyboard. SwiftKey Flow like using Swipe, allows you to enter text by sliding your fingers across the on-screen keyboard. This feature is optimized for use with the on-screen QWERTY keyboard.

– Cursor control when enabled, allows you to control your on-screen cursor by moving your finger across the keyboard.

– Flick input allows you to flick upwards on a key to view symbols and alternative characters.

• Key-tap feedback provides feedback functions to be enabled such as:

– Sound enables auditory feedback when you tap an on-screen key.

– Vibration enables vibration feedback when you tap an on-screen key.

– Character preview provides an automatic preview of the current character selection within the text string. This is helpful when multiple characters are available within one key.

– Press and hold delay: allows you to select a time interval for this action. Choose from: Short, Medium, Long, or Custom.

• More settings provides access to additional access to more settings.

– Reset settings resets the keyboard settings back to their original configuration.

From this menu you can set Predictive Text settings.

1. From the main Settings screen, tap Language and input.

2. Tap the icon next to Samsung keyboard.

3. Tap the ON/OFF slider, located to the right of the Predictive text field, to turn it ON.

4. Tap Predictive text.

5. The following options are available:

• Live word update allows the device to automatically update its word database with popular new words every day.

• Personalized data: allows you to use personal language that you have added to make your prediction results better.

• Learn from Facebook: allows you to login to your Facebook account so your phone can learn your Facebook style.

• Learn from Gmail: allows you to login to your Gmail account so your phone can learn your Gmail style.

• Learn from Twitter: allows you to login to your Twitter account so your phone can learn your Twitter style.

• Learn from Messages: allows your device to learn from your Messages.

• Learn from Contacts: allows your device to learn from your Contacts.

• Clear server data: deletes anonymous data that is stored on the personalization server.

• Clear personal data: removes all personalized data that you have entered.

• Privacy Policy: click the link to read the privacy policy. Follow the on-screen instructions.

To configure Swype settings:

1. From the main Settings screen, tap Language and input.

2. Tap the icon next to Swype.

3. Tap Settings on the left side of the screen to alter these settings:

• Vibrate on keypress: activates a vibration sensation as you enter text using the keypad.

• Sound on keypress: turns on sounds generated by the Swype application.

• Pop-up on keypress: displays the character above the key when typing.

• Long-press delay: set the time needed to select alternate characters.

• Show complete trace: once enabled, sets wether or not to display the complete Swype path.

• Auto-capitalization: automatically capitalizes the first letter of every sentence.

• Auto-spacing: automatically inserts a space between words. When you finish a word, just lift your finger or stylus and start the next word.

• Next word prediction: once enabled, predicts the next word in your text string based on your current text entries.

• Show Voice key: once enabled, displays the Voice icon on your Swype keyboard so you can use the Voice input option.

• Word choice list font size: allows you to change the font size in the word choice list.

4. Tap Themes on the left side of the screen to access the following options:

• Portrait keyboard: allows you to set the Portrait keyboard to Full screen, Mini left, or Mini right.

• Landscape keyboard: allows you to set the Landscape keyboard to Full screen, Mini left, Mini right, or split.

• Keyboard height: allows you to set the keyboard height in both Portrait and Landscape modes.

5. Tap My Words on the left side of the screen to access the following options:

• Backup & Sync: allows you to backup your Swype dictionary and sync your Swype dictionary across multiple devices.

• Living Language: when enabled, this feature automatically updates your Swype dictionary with popular new words.

• Social integration: allows you to learn information from your Facebook, Twitter, and Gmail accounts to help you while using Swype.

• Edit my dictionary: allows you to edit your personal Swype dictionary.

• Clear language data: deletes all of your personal language data, including your words.

• Contribute usage data: when enabled, allows the Nuance® application to collect usage data for better word predictions.

• Cellular data: when enabled, activates cellular data usage by the Swype application so it can receive program updates, language downloads, and other related features via your existing data connection.

6. Tap Languages on the left side of the screen to activate and select the current text input language. Default language is English. Touch Download languages, to download additional languages.

7. Tap Gestures on the left side of the screen to view helpful information on using gestures while using Swype.

8. Tap Help on the left side of the screen to see the following options:

• How to Swype: provides tips on how to learn to use Swype.

• Show helpful tips: once enabled, displays helpful tips and hints as you are using Swype.

• Version: displays the software version information.

9. Tap Updates on the left side of the screen to download any new Swype updates. If an update is available, it will display under the updates heading. If no updates are displayed, then check back later to see any available updates.

From this menu you can set Samsung keyboard options.

1. From the main Settings screen, tap Language and input.

2. Tap the icon next to Google voice typing.

3. The following options are available:

• Choose input languages: tap on a language that you want to input. Select Automatic to use the local language or select a language from the list.

• Block offensive words: tap to create a checkmark and enable the blocking of recognized offensive words from the results of your voice-input Google typing.

• Offline speech recognition: Enables voice input while offline.

This menu allows you to set the speech settings for Voice input.

1. From the main Settings screen, tap Language and input.

2. Tap Voice search to configure the following:

• Language: Choose a language for your voice input.

• Speech output: Sets whether you will use speech output always or only when using hands-free.

• Block offensive words: Enable or disable blocking of recognized offensive words from the results of your voice-input Google searches.

• Hotword detection: Enable to being able to launch voice search by saying the word “Google”.

• Offline speech recognition: Enables voice input while offline.

• Bluetooth headset: allows you to record audio through a Bluetooth headset if available.

3. Tap Text-to-speech options and select Samsung text-to-speech engine or Google Text-to-speech Engine.

4. Tap next to the preferred TTS engine configure the following settings:

• Language: allows you to set the language for spoken text.

• Settings for Samsung text-to-speech engine allows you to view Open Source Licenses.

• Settings for Google Text-to-speech Engine: allows you to view Open Source Licenses.

• Install voice data: allows you to install voice data for speech synthesis.

5. Scroll down to the General section to access the following options:

• Speech rate: Set the speed at which the text is spoken.

• Listen to an example: Play a sample of speech synthesis (available if voice data is installed).

• Default language status: Displays whether or not the default language is supported.

This option sets your Pointer speed for your mouse or trackpad when you are using a keyboard dock accessory.

1. From the main Settings screen, tap Language and input.

2. Tap Pointer speed then drag the slider to the right to go faster or to the left to go slower.

3. Tap OK to save your setting.

This menu allows you to change the current time and date displayed.

1. From the main Settings screen, tap Date and time.

2. Tap Automatic date and time to allow the network to set the date and time.

3. Tap Automatic time zone to allow the network to set the time zone.

Important! Deactivate Automatic date and time to manually set the rest of the options.

4. Tap Set date and tap the up and down arrows to set the Month, Day, and Year then tap Set.

5. Tap Set time and tap the up and down arrows to set the Hour, Minute, and PM/AM, then tap Set.

6. Tap Select time zone, then tap a time zone.

7. Optional: Tap Use 24-hour format. If this is not selected the phone automatically uses a 12-hour format.

8. Tap Select date format and tap the date format type.

Safety assistance is intended to help users send a quick notice of their approximate location and visual surroundings to the mobile device of an emergency contact chosen in advance.

Important! This feature is only for your convenience and is not intended as, or should it be treated as, a substitute for emergency calls to the authorities.

1. From the main Settings screen, tap Safety assistance.

2. You must first set up an emergency contact. If you have not already done so, from the main Safety assistance screen, tap Create primary contact.

3. Tap Create new contact or Select from contacts.

4. Enter your emergency contact information and tap Save.

5. From the main Safety assistance screen, the following options are available:

• Emergency mode: allows you to save power during an emergency by using a minimal home screen layout and limiting the number of usable apps. Touch and slide the slider to the right to turn it on.

• Geo News: informs you of natural disasters and extreme weather conditions occurring in your vicinity. Touch and slide the slider to the right to turn it on.

• Send help messages: helps you send a quick notice of your approximate location and visual/auditory surroundings to the mobile phone of the Emergency contact that you have created. Tap the power keys 3 times in a row to send an emergency message to your emergency contact: You should still make an emergency call to the appropriate authorities if needed. Touch and slide the slider to the right to turn it on. The following additional options are available:

– Send pictures: pictures taken by the front and rear cameras will be sent to your emergency contact when an emergency has been declared (3 quick taps to the power button).

– Send sound recording: a sound recording will be sent to your emergency contact when an emergency has been declared (3 quick taps to the power button).

• Manage emergency contacts: allows you to create or modify your emergency contact information.

This menu allows you to modify your HDMI (Audio output) settings.

1. From the main Settings screen, tap Accessories.

2. Tap Audio output to set your Audio output to Stereo or Surround.

See how much battery power is used for device activities.

1. From the main Settings screen, tap Battery. The battery level displays in percentage. The amount of time the battery was used also displays. Battery usage displays in percentages per application.

2. Tap one of the listed applications to view how it is affecting battery use.

Note: Other applications may be running that affect battery use.

3. Tap the Show battery percentage check box to have the battery percentage displayed on your battery charge icon on your status bar.

Power saving mode allows you to manage your phone to conserve power. You can select Power mode to limit performance on your phone to save power or select Ultra power saving mode to save more power by adjusting the screen to use grayscale and limit access to your applications.

1. From the main Settings screen, tap Power saving mode.

2. Tap either Power saving mode or Ultra power saving mode.

3. Touch and slide the slider to the right to turn it on.

4. Tap any of the options listed under the mode that you selected.

From this menu you can view the memory allocation for the memory card and USB as well as mount or unmount the SD card.

To view the memory allocation for your external SD card:

From the main Settings screen, tap Storage. The available memory displays under the Total space and Available space headings for both Device memory and SD card.

SD card

Tap Unmount SD card to unmount your SD card so that you can safely remove it, then tap OK.

– or –

1. Tap Format SD card to format your SD card. This will delete all data on your SD card including music, videos, and photos.

2. Tap Format SD card again.

3. Tap Delete all to continue or press to cancel.

Note: The Format SD card option is only available when your SD card is mounted.

To require a numeric PIN or password to decrypt your phone each time you power it on or encrypt the data on your SD card each time it is connected:

1. From the main Settings screen, tap Security.

2. You must first set up a screen lock type if you haven’t already done so.

3. Tap Encrypt device. For more information, read the displayed help screen.

4. Tap Encrypt external SD card to enable the encryption on SD card data that requires a password be entered each time the microSD card is connected.

Tip: Make sure your battery is charged more than 80 percent. Encryption may take an hour or more.

Use this option to set up your password when one is first required or change your current password.

1. From the main Settings screen, tap Security → Set up/change password.

2. Enter a new password and tap Confirm.

3. Enter the new password again and tap Confirm.

Prevent another user from using your SIM card to make unauthorized calls or from accessing information stored on your SIM card by protecting the information using a PIN code. When enabled, your phone will ask for a PIN number each time you use the phone. Using this option you can also change your SIM PIN number.

1. From the main Settings screen, tap Security.

2. Tap Set up SIM card lock.

3. Tap Lock SIM card, enter your SIM PIN code, then tap OK.

Note: You must activate Lock SIM card before you can change your SIM PIN code.

4. Tap Change SIM PIN.

5. Enter your old SIM PIN code and tap OK.

6. Enter your new SIM PIN code and tap OK.

7. Re-type your new SIM PIN code and tap OK.

If you enter the wrong SIM PIN more than 3 times, you will need to contact your AT&T Customer Service Representative to get the PUK code for your device.

1. Each time you enter a wrong SIM PIN number the phone will display how many attempts you have remaining the next time you try and enter the SIM PIN number.

2. After the third incorrect attempt, SIM is now disabled, Enter PUK code to continue. Contact carrier for details displays and your SIM card is locked.

3. Enter the new PUK code that you received from your AT&T Customer Service Representative on the keypad that is displayed.

4. Enter a new PIN code on the keypad that is displayed and tap OK.

5. Enter the new PIN code again in the Confirm PIN code field and tap OK.

Note: While your SIM PIN is locked, you will still be able to make Emergency calls if necessary.

When enabled, password characters display briefly as you touch them while entering passwords.

1. From the main Settings screen, tap Security.

2. Tap Make passwords visible to create a checkmark and enable or disable the display of password characters.

The Device Administration feature allows you to select one or more administration applications that control your device for security purposes (for example, if your phone is lost of stolen). These applications enforce remote or local device security policies.

Some of the features a device administration application might control are:

• Setting the number of failed password attempts before the device is restored to factory settings.

• Automatically locking the device.

• Restoring factory settings on the device.

Note: If a device uses multiple enabled administration applications, the strictest policy is enforced.

1. From the main Settings screen, tap Security.

2. Tap Device administrators.

3. Select a device administrator and follow the prompts. If no device administrators are listed, you can download them from the Play Store.

This feature allows you to download and install non-Market applications.

1. From the main Settings screen, tap Security.

2. Tap Unknown sources. A check mark is displayed to indicate it is active.

Warning! Enabling this option causes your phone and personal data to be more vulnerable to attack by applications from unknown sources.

This feature allows you to either block or warn you before installing apps that may cause harm to your phone.

1. From the main Settings screen, tap Security.

2. Tap Verify apps. A check mark is displayed to indicate it is active.

When you activate this feature, your phone will automatically check for changes to the security policy and download any updates to improve security and service.

1. From the main Settings screen, tap Security.

2. Tap Security policy updates to create a checkmark and activate the feature.

When you activate this feature, your phone will automatically send security reports to Samsung via Wi-Fi for threat analysis.

1. From the main Settings screen, tap Security.

2. Tap Send security reports to create a checkmark and activate the feature.

This option allows you to select where you will back up your credentials.

1. From the main Settings screen, tap Security → Storage type.

2. Select the backup storage location for your credentials.

If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.

1. From the main Settings screen, tap Security.

2. Tap Trusted credentials. The trusted credentials screen has two tabs:

• System: Displays CA certificates that are permanently installed in the ROM of your device.

• User: Displays any CA certificates that you installed, for example, in the process of installing a client certificate.

3. Tap a CA certificate to examine its details. A scrolling screen displays the details.

4. Scroll to the bottom of the details screen and tap Turn off to disable a System certificate or Remove to remove a User certificate.

Caution! When you disable a system CA certificate, the Turn off button changes to Turn on, so you can enable the certificate again, if necessary. When you remove a user-installed CA certificate, it is permanently deleted and must be re-installed, if needed.

5. Tap OK to return to the certificate list. When enabled, a check mark appears in the check box.

Install encrypted certificates from an installed memory card.

Note: You must have installed a memory card containing encrypted certificates to use this feature.

1. From the main Settings screen, tap Security.

2. Tap Install from phone storage, then choose a certificate and follow the prompts to install.

Clear stored credentials.

Note: This setting only appears if you have installed encrypted certificates.

1. From the main Settings screen, tap Security.

2. Tap Clear credentials to remove all certificates.

Provides access to built-in Help information.

1. From the main Settings screen, tap Help.

2. Select an on-screen topic for more information.

This menu contains legal information, system tutorial information, and other phone information such as the model number, firmware version, baseband version, kernal version, and software build number.

To access phone information:

1. From the main Settings screen, tap About device.

2. The following information displays:

• Software update: allows you to update your phone software, if available.

• Status: displays the Battery status, Battery level (percentage), Network, Signal strength, Mobile network type, Service state, Roaming status, Mobile network state, the phone number for this device (My phone number), IMEI number, IMEISV number, IP address, Wi-Fi MAC address, Bluetooth address, Serial number, Up time, and Device status.

• Legal information: This option displays information about Open source licenses, Google legal information, and Samsung legal information. This information clearly provides copyright and distribution legal information and facts as well as Google Terms of Service, Terms of Service for Android-powered Phones, and much more pertinent information as a reference. Read the information and terms, then press to return to the Settings menu.

• Report diagnostic info: allows you to report diagnostic information when you are have technical problems.

• Device name: displays the phone’s model name.

• Model number: displays the phone’s model number.

• Android version: displays the android version loaded on this handset.

• Baseband version: displays the baseband version loaded on this handset.

• Kernel version: displays the kernel version loaded on this handset.

• Build number: displays the software, build number.

• SE for Android status: displays the Security Enhancement status of your device.

• Security software version: displays the version of the latest security software.

Note: Baseband, kernal and build numbers are usually used for updates to the handset or support. For additional information please contact your AT&T service representative.

The AT&T Software Update feature enables you to use your phone to connect to the network and upload any new phone software directly to your phone. The phone automatically updates with the latest available software when you access this option.

1. From the main Settings screen, tap About device → Software update.

2. Tap Check for updates.

3. At the AT&T Software update prompt, tap OK to continue.

4. The phone automatically updates the software (if available), otherwise, when the Current software is up to date prompt is displayed, tap OK.

5. When updating software, once the update file is downloaded, you can delay the update on the start screen by postponing it for a certain period of time. If you want to resume the update before the selected time, tap Continue update.

You can download and install applications from Play Store or create applications using the Android SDK and install them on your device. Use Application manager settings to manage applications.

Warning! Because this device can be configured with system software not provided by or supported by Google or any other company, end-users operate these devices at their own risk.

From the main Settings screen, tap Application manager.

See how memory is being used by Downloaded or Running applications.

1. From the main Settings screen, tap Application manager.

2. Tap DOWNLOADED, SD CARD, RUNNING, or ALL to display memory usage for that category of applications. The graph at the bottom of the Downloaded tab shows used and free device memory. The graph at the bottom of the Running tab shows used and free RAM.

Displays apps you have downloaded onto your device.

1. From the main Settings screen, tap Application manager.

2. Tap the DOWNLOADED tab to view a list of all the downloaded applications on your device.

3. To switch the order of the lists displayed in the Downloaded tabs, Tap Sort by size or Sort by name.

4. To reset your application preferences, Tap Reset app preferences.

Note: This will reset the preferences for disabled apps, disabled app notifications, default applications for actions, and background data restrictions for apps. You will not lose any app data.

5. Tap an application to view and update information about the application, including memory usage, default settings, and permissions.

Displays apps you have downloaded onto your SD card.

1. From the main Settings screen, tap Application manager.

2. Tap the SD CARD tab to view a list of all the downloaded applications on your device.

3. To switch the order of the lists displayed in the On SD card tab, Tap Sort by size or Sort by name.

4. To reset your application preferences, Tap Reset app preferences.

Note: When you Reset app preferences, you will not lose any app data.

5. Tap an application to view and update information about the application, including memory usage, default settings, and permissions.

View and control services running on your device.

1. From the main Settings screen, tap Application manager.

2. Tap the RUNNING tab. All the applications that are currently running on the device display.

3. Tap one of the applications to view application information. The following options display:

• Stop: Stops the application from running on the device. This is usually done prior to uninstalling the application.

Warning! Not all services can be stopped. Stopping services may have undesirable consequences on the application or Android System.

• Report: Report failure and other application information.

Note: Options vary by application.

This menu allows you to pre-set the default applications for your Home screen and your messaging app.

1. From the main Settings screen, tap Default applications.

2. Tap Home and tap one of the following options:

• TouchWiz easy home: this option provides a Home screen that provides an easier user experience for the first-time smartphone users.

• TouchWiz home: this is the Home screen that originally displays on your phone.

3. Tap Message and select the method of sending messages. Select either Messaging (original Samsung messaging app) or Hangouts (Google messaging app).

4. To clear defaults that you have set up, tap Clear.

This section allows you to modify settings associated with the Calendar app.

1. From the main Settings screen, tap Calendar.

2. Tap First day of week and select either Locale default, Saturday, Sunday or Monday.

3. Tap Lock time zone to lock event time based on your current user-selected time zone. Select a time zone from within the Select time zone field.

4. Tap Show week numbers to display the week numbers along the side of the week entries.

5. Tap Hide declined events to activate this option. A check mark indicates selection.

6. Tap Hide completed tasks to activate this option. A check mark indicates selection.

7. Tap Weather to have weather symbols displayed on your calendar. A check mark indicates selection.

8. Tap Select alert type to select the event notification method. Choose from: Sound alerts, Status bar notifications, and Off.

9. Tap Notification sound to assign a ringtone to a calendar event notification.

10. Tap Vibration to set the Event notification tone to vibrate.

11. Tap Quick responses to select quick responses to emailing guests.

The Call settings menu allows you to modify your settings for making calls with your phone.

From the main Settings screen, tap Call.

– or –

From the Home screen, tap Phone icon → Menu icon → Settings.

The following options are available:

1. From the main Settings screen, tap Call → Call rejection.

2. Tap Auto reject mode and tap one of the following options:

• Off: to turn Auto reject mode off.

• All incoming calls: to reject all calls.

• Auto reject numbers: to reject all calls in your Reject list.

3. Tap Auto reject list.

4. Tap + to manually add numbers to the Reject list.

5. Tap Unknown, to create a checkmark and automatically reject all calls that are not in your Contacts list.

1. From the main Settings screen, tap Call → Call rejection → Set up call rejection messages.

2. Tap + to manually add a reject message.

– or –

Tap one of the pre-written messages to be displayed when you want the call to be rejected. You can edit the message if desired.

3. Tap Save to save the reject message.

1. From the main Settings screen, tap Call → Answering and ending calls.

2. The following options are available:

• Pressing the home key: Tap this option to be able to accept incoming calls by pressing the Home key.

• Voice control: Tap this option to be able to accept incoming calls by using your voice.

• Waving hand over device: Tap this option to answer a call by waving your hand over the device.

• Pressing the power key: This option will allow you to end a call by pressing the power key without turning off the screen.

This option allows you to have incoming call notifications pop-up on your display if an application is open on the screen.

1. From the main Settings screen, tap Call.

2. Tap Call notification pop-ups to create a checkmark and activate the feature.

This option allows you to have in-call status information displayed in a pop-up if an application is open on the screen.

1. From the main Settings screen, tap Call.

2. Tap In-call status pop-ups to create a checkmark and activate the feature.

This option displays a caller’s recent social network activity and the history of your communication with them when a call is received.

1. From the main Settings screen, tap Call.

2. Tap Show caller information to create a checkmark and activate the feature.

1. From the main Settings screen, tap Call → Call alerts.

2. Tap the following options to create a checkmark and activate the features:

• Vibrate when answered: enables your phone to vibrate when the called party answers the phone.

• Call-end vibration: enables your phone to vibrate when the call ends.

• Call connect tone: plays a tone when a call is connected.

• Minute minder: beeps twice every minute that you are on a call.

• Call end tone: plays a tone when a call is ended.

• Notify during calls: turns on alarm and message notifications during a call.

1. From the main Settings screen, tap Call → Call accessories.

2. The following options are available:

• Automatic answering: configures the device to automatically answer and incoming call when a headset is detected.

• Automatic answering timer: configures the time delay before the device automatically accepts the incoming call.

• Outgoing call conditions: allows you to make calls even when the device is locked.

1. From the main Settings screen, tap Call → Additional settings.

2. Tap one of the following options:

• Caller ID: allows you to choose how your Caller ID will be displayed. Select Network default, Hide number, or Show number.

• Call forwarding: allows you to forward your calls to another number.

• Auto area code: allows you to automatically prepend a specific area code to all outbound calls.

• Call waiting: the network service informs you when someone is trying to reach you during another call. Tap to activate.

• Auto redial: automatically redials the last number if the call was either cut off or was unable to connect. Tap to activate.

• Fixed dialing numbers: allows you to restrict outgoing calls to a limited set of phone numbers.

• TTY mode: allows you to connect your phone and a TTY device via a special cable that plugs into your phone’s headset jack. If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable.

• Hearing aids: allows you to improve the sound quality of your phone when you are using a hearing aid.

Enabling FDN

1. From the main Settings screen, tap Call → Additional settings → Fixed dialing numbers.

2. Tap Turn on FDN.

3. At the prompt, enter your PIN2 code and tap OK. FDN is enabled.

4. To enable FDN after it has been disabled, tap Turn off FDN, enter your PIN2 code and tap OK.

Important! Not all SIM cards use a PIN2 code. If your SIM card does not, this menu does not display. The PIN2 code is provided by your carrier. Entering an incorrect PIN2 code could cause the phone to lock. Contact customer service for assistance.

Changing the PIN2 Code

1. From the main Settings screen, tap Call → Additional settings → Fixed dialing numbers.

2. Tap Change PIN2.

3. At the prompt, enter your old PIN2 code.

4. At the prompt, enter a new PIN2 code.

5. Confirm your PIN2 code.

Managing the FDN List

When this feature is enabled, you can make calls only to phone numbers stored in the FDN list on the SIM card.

Note: Before you can manage an FDN list a list must be created.

1. From the main Settings screen, tap Call → Additional settings → Fixed dialing numbers.

2. Tap FDN list.

3. A list of all existing FDN numbers will be displayed.

This option allows you to personalize the sounds you hear when your phone rings and when you press the keypad.

1. From the main Settings screen, tap Call → Ringtones and keypad tones.

2. Tap Ringtones, select a ringtone, and tap OK.

3. Tap Vibrations, select a vibration type, and tap OK.

4. Tap Vibrate when ringing to create a checkmark if you want your phone to vibrate when a call is incoming.

5. Tap Dialing keypad tone to create a checkmark if you want tones to play when the keypad is pressed.

This option allows you to personalize the sounds you hear during a call with and without earphones.

1. From the main Settings screen, tap Call → Personalize call sound.

2. At the Personalize call sound display, tap one of the following options:

• Adapt sound: allows you to customize your sounds. Follow the on-screen instructions to set up your personal call sound.

• Soft sound: plays a softer sound when the other party is in a noisy environment.

• Clear sound: plays a clearer sound when the other party sounds unclear or muffled.

• Off: turns off your customized call sound and plays the default sounds.

This option helps to suppress background noise from your side during a call.

From the main Settings screen, tap Call → Noise reduction to create a checkmark and enable the feature.

1. From the main Settings screen, tap Call → Voicemail Service. Voicemail service provided by your carrier is the default.

2. Tap My carrier to remove the carrier Voicemail service.

You can view or modify your voicemail number from this menu.

1. From the main Settings screen, tap Call → Voicemail settings.

2. Tap the Voice mail number field, backspace to erase the digits, and enter a new voicemail number using the keypad, then tap OK.

3. Tap OK.

This option allows you select your default ringtone that you receive whenever you get a call.

1. From the main Settings screen, tap Call → Sound.

2. Tap a ringtone to hear it played.

3. Select a ringtone and tap OK.

This option allows you turn on vibration when you receive a call.

1. From the main Settings screen, tap Call.

2. Tap Vibrate to create a checkmark and activate the Vibrate feature.

To modify the settings for your contacts, follow these steps:

1. From the main Settings screen, tap Contacts.

2. The following options are available:

• Import/Export: allows you to move contacts to or from your memory card or USB storage.

• Contacts to display: allows you to choose to display All contacts, those on your Device, SIM card, Samsung account, Gmail, or only display contacts that are part of a Customized list.

• Swipe to call or send msg: allows you to call or message by swiping the contact to the left (to message) or to the right (to call).

• Only contacts with phones: allows you to only display contacts that have phone numbers.

• Sort by: allows you to sort by First name or Last name.

• Display contacts by: allows you to sort by First name first or Last name first.

• Service numbers lists the currently available service numbers.

• Send contact information: allows you to send all or individual contacts via Bluetooth in the form of namecards. Tap Export settings and make a selection.

• Accounts: allows you to add and manage your Samsung, ChatON, Google, LDAP (Lightweight Directory Access Protocol), and Microsoft Exchange ActiveSync accounts. Tap Add account and then follow the on-screen instructions.

• AT&T Address Book: allows you to access the AT&T Address Book so you can sync your contacts.

The Email settings allow you to customize your Email application.

1. Set up an email account if you haven’t already done so.

2. From the main Settings screen, tap Email.

1. From the main Settings screen, tap Email → Manage accounts. All of your Email accounts are listed.

2. Tap an account to modify the settings for that account.

Note: The settings may be different depending on the type of email account.

3. Tap More settings for additional options.

1. From the main Settings screen, tap Email.

2. Tap Display. The following options are available:

• Auto fit content: allows you to shrink your email content to fit the screen.

• Message preview line: allows you set the number of lines that are shown in the email preview.

• Title line in list: allows you to set the title line to the Email Subject or the Sender.

• Hide checkboxes: allows you to hide the checkboxes that are displayed in your email list.

3. Tap Priority sender settings. The following options are available:

• Set as default folder: shows the priority sender inbox whenever you open the Email app.

• Email notifications: activates the email notification icon to appear within the Notifications area of the status bar when a new email (Gmail, etc.) is received.

• Notification sound: plays a selected sound when a new email message is received.

• Vibrate: activates a vibration when a new email message is received.

4. Tap Spam addresses.

5. Tap + to add an Email address to your Spam folder.

6. Tap Delay email sending to delay the sending of emails.

7. Tap Set length of delay to set the delay time. You can set the delay from 3 up to 30 seconds. This will give you time to cancel the sending of an email if needed.

This section allows you to modify settings associated with using your Gallery.

1. From the main Settings screen, tap Gallery.

2. The following options are available:

• Sync via Wi-Fi only: select this option if you only want to sync pictures and videos when you are connected to a Wi-Fi network.

• Filter by: allows you to filter your Gallery when searching for certain types of picture or videos. Select an option to make a checkmark.

• Tag buddy: allows you to tag your pictures or videos by Location, Category, or Tags. Touch and move the slider to the right to activate the feature.

• Face tag: allows you to tag your pictures or videos when a face is present.

3. Tap Add account to add a Samsung, Facebook, or Google account.

This section allows you to modify settings associated with using your web browser.

1. From the main Settings screen, tap Internet.

2. Tap Account to sign on to your Samsung account if you have not already done so. You will need to do this if If you want to sync your bookmarks and open pages with other devices.

3. The following settings are available for modification:

• Set homepage: Sets the current home page for the Web browser.

• Auto fill forms: allows you to enter text to be used in your web profile. Tap Add profile, then enter text for the Web form auto fill.

• Privacy:

– Suggest search terms and Web suggestions: displays predictions of related queries and popular websites in the address bar as you type.

– Preload available links: allows you improve performance when loading pages.

– Remember form data: Allows the device to store data from any previously filled out forms. Remove the checkmark to disable this function.

– Remember passwords: Stores user names and passwords for visited sites. Remove the checkmark to disable this function.

– Delete personal data: allows you to delete all personal data such as Browsing history, Cache, Cookies and site data, Passwords, Auto-fill data, and Location access.

• Screen and text:

– Text scaling: allows you to preview the text size, scale the text size using a slider bar, set the zoom amount on double tap, and minimize the font size using a slider bar.

– Force zoom: allows you to override the website’s request to control zoom.

– Text encoding: adjusts the current text encoding.

– Full screen: allows you to use Fullscreen mode to hide the status bar.

– Auto hide toolbar: allows you to hide the up and down toolbar when you are scrolling pages.

– Text booster: allows you to view PC websites easily by boosting the text size. Note: the layout may change as a result.

• Content settings:

– Accept cookies: Allows sites, that require cookies, to save and read cookies from your device.

– Turn on location: Allows websites to request access to your location.

– Turn on JavaScript: Enables Javascript for the current Web page. Without this feature, some pages may not display properly. Remove the checkmark to disable this function.

– Block pop-ups: Prevents popup advertisement or windows from appearing on-screen. Remove the checkmark to disable this function.

– Default storage: Allows you to set your default storage to Device or Memory Card.

– Website settings: View advanced settings for individual websites.

– Turn on notifications: Allows website notifications. Select Always on, On demand, or Off.

– Clear notifications: Deletes website notification access information.

– Reset settings: Restores all settings to default.

• Bandwidth management:

– Preload webpages: Allows the browser to preload pages in the background. You can set to Always, Only on Wi-Fi, and Never.

– Load images: Allows web page images to be loaded along with the other text components of a loaded website.

– Open pages in overview: Displays an overview of newly opened web pages.

This section allows you to modify settings associated with using the default Messaging application.

1. From the main Settings screen, tap Messages.

2. The following Messaging settings are available:

• Default messaging app: allows you to set the default messaging app that you can use to send all of your messages.

• Display: the following message display settings are available:

– Bubble style: allows you to choose from several bubble styles for your messages. Bubbles are the rounded boxes that surround each message.

– Background style: allows you to choose from several background styles for your messages.

– Change font size: allows you to change the font size in your messages by using the Volume key.

• Quick responses: allows you to select short pre-written sentences that you can use in your messages.

• Text messages: the following text message settings are available:

– Manage SIM card messages: allows you to manage the messages that you have stored on your SIM card.

– Input mode: allows you to set the input mode for your text messages. Choose between GSM Alphabet, Unicode, or Automatic.

– Message center: allows you to enter the number of your Message center where your messages reside while the system is attempting to deliver them.

• Multimedia messages: the following multimedia message settings are available:

– Group conversation: allows you to send a single message to multiple recipients.

– Auto retrieve: allows the message system to retrieve messages automatically.

– Set restrictions: allows you to set the following restrictions for multimedia content. Restricted: you can only create and submit messages with content belonging to the Core MM Content Domain. or Warning. Warning: the phone will warn you via pop up messages that you are creating a multimedia message which does not fit the Core MM Content Domain. Free: you may add any content to the message.

– MMS alert: allows you to receive an alert when MMS mode becomes active.

• Delete old messages: deletes old messages when the limit is reached, rather than having them overwritten. Touch and slide the slider to the right to turn it on.

– Text message limit: allows you to set a limit on how many text messages can be in one conversation.

– Multimedia message limit: allows you to set a limit on how many multimedia messages can be in one conversation.

• Priority senders: allows you to send messages with priority.

• Push messages: allows you to receive push messages from the network.

• Cell broadcast: allows you to receive Cell broadcast messages. Touch and slide the slider to the right to turn it on.

– Select channels: allows you to set up the channel that you will receive CB messages on. You can also select My channel and add your own CB channel using the Add channel option below.

– Add channel: allows you to add your own CB channel.

• Notifications: the following notification settings are available:

– Notification sound: allows you to set the ringtone for your message notifications.

– Vibrate: allows you to configure the vibration mode associated with message alerts.

– Repeat message alert: allows you to set the interval for new message alerts. Choose from: Once, Every 2 minutes, or Every 10 minutes.

– Pop-up display: allows you to have new messages displayed as pop-ups on your screen.

– Lock screen: when enabled, allows you to view a preview of new message text on your lock screen.

– Status bar: when enabled, allows you to view a preview of new message text on the Status bar.

• Emergency alerts:

– Emergency alerts: allows you to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS).

– Emergency notification preview: allows you to play the emergency alert tone so you will know what to expect when an alert is received.

– Alert reminder: allows you to set reminders after you receive an alert. You can select Once, Every 2 minutes, Every 15 minutes, or Off (default).

• Signature: allows you to add a signature block to end of your messages. Touch and slide the slider to the right to turn it on. Tap Add signature to create your signature.

• Spam filter: allows you to set your Spam filter settings. Touch and slide the slider to the right to turn it on.

– Add to spam numbers: allows you to manually enter and assign a phone number as being sent from a spam source.

– Add to spam phrases: allows you to assign a specific text phrase as belonging to a spam message. Ex: Dear friend.

– Block unknown senders: when active, automatically blocks incoming messages from unknown sources or blocked numbers.

• Delay message sending: to delay the sending of emails, touch and slide the slider to the right to turn it on. This will give you time to cancel the sending of an email if needed.

– Set length of delay: sets the delay time. You can set the delay from 3 up to 30 seconds.

• Safe mode: This settings help to make your messaging more secure.

– Allow access to all links: allows you to tap on links that are included in your messages.

– Potential threat alerts: allows you to automatically receive notifications whenever applications with the authority to send or receive messages are installed. This will help prevent phishing.

This section allows you to modify settings associated with the S Voice app.

1. From the main Settings screen, tap S Voice.

2. The following options are available:

• Language: allows you to set your default language for S Voice.

• Hide offensive words: allows you to have potentially offensive words replaced with asterisks.

• About: displays information about the S Voice app including the Terms of Service and the Privacy Policy.

• Open via the home key: allows you to open S Voice by double pressing the home key.

• Voice wake-up: allows you to customize your wake-up command for S Voice.

• Auto start speakerphone: automatically turns on the speaker when using S Voice to make a call.

• Show body of message: allows you to also see the message content whenever a new message arrives.

• Check missed events: allows you to see your missed events whenever you open the S Voice app.

• Personal briefing: allows you to receive a voice briefing of your schedule whenever you open the S Voice app.

• Erase S Voice data: allows you to erase the data that you have stored on the server.

• Home address: allows you to enter your home address to be used in S voice.

• Log in to Facebook: a shortcut to log in to your Facebook account.

• Sign in to Twitter: a shortcut to sign in to your Twitter account.

You can connect your device to a PC using your PC data cable using various USB connection modes.

Media device (MTP): allows you to transfer media files in Windows, or using an Android file transfer on a Mac.

Camera (PTP): allows you to transfer photos using the camera software, and transfer any files onto a PC that does not support MTP.

Note: To sync your device to your computer it is highly recommended that you install Samsung Kies.

Note: If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher installed on your computer. Also, ensure that you have Samsung Kies 2.0 or Windows Media Player 10 or higher installed on your computer.

You can connect your device to a PC as a removable disk and access the file directory. If you insert a memory card in the device, you can also access the files directory from the memory card by using the device as a memory card reader.

Note: The file directory of the memory card displays as a removable disk, separate from the internal memory.

1. Connect the USB cable to the device and connect the cable to the computer. After a few seconds, a pop-up window displays on the PC when connected.

2. On the PC pop-up, click Open device to view files.

3. Tap Card to see the contents on your memory card or tap Phone to see the contents on your phone.

4. You can now copy and move files back and forth between your PC and your phone.

By default, your device’s Wi-Fi feature is turned off. Turning Wi-Fi on makes your device able to discover and connect to compatible in-range WAPs.

1. From any Home screen, tap Settings → Wi-Fi.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON.

1. From any Home screen, tap Settings → Wi-Fi. The network names and security settings (Open network or Secured with WEP) of detected Wi-Fi networks are displayed in the Wi-Fi networks section.

2. Tap the network you want to connect to.

Note: When you select an open network, you will be automatically connected to the network.

3. Enter a wireless password if necessary.

1. From any Home screen, tap Settings → Wi-Fi.

2. Tap Add Wi-Fi network.

3. Enter the Network SSID. This is the name of your Wireless Access Point.

4. Tap the Security field and select a security option. This must match the current security setting on your target WAP.

5. If secured, you will also need to enter your WAP’s password.

6. Tap Show advanced options, if you need to add advanced options such as Proxy settings and IP settings.

7. Tap Connect to store the new information and connect to your target WAP.

Note: The next time your device connects to a previously accessed or secured wireless network, you are not prompted to enter the WAP key again, unless you reset your device back to its factory default settings.

1. From any Home screen, tap Settings → Wi-Fi.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi OFF.

Note: Use of wireless data connections such as Wi-Fi and Bluetooth can cause an added drain to your battery and reduce your use times.

1. From any Home screen, tap Settings → Wi-Fi.

2. Tap Scan. All available Wi-Fi networks are displayed.

The Just for you option displays available content matching your activated media categories. These categories can be configured during your initial set up or at any later time.

1. Sign into your Samsung account.

2. From the main Smart Remote screen, tap (Combined View) → Just for you.

3. From the On TV tab, press the menu icon and then select Settings.

4. Access parameters such as Basic profile, Genres and Sports to then configure and enable those parameters you would like to show in the Just for you tab.

5. Enter your current zip code and tap Done. This zip code must correspond to the location of your desired TV and set top box.

Your device can be used to control boxes/receivers from several rooms. You could go from controlling your set top box in your living room and then move into your bedroom to do the same.

1. Sign into your Samsung account.

2. From the main Smart Remote screen, tap the On TV tab.

3. Press the menu icon and then select Settings → Add room.

4. Name the new room and tap Next.

5. Enter your current zip code and tap Done. This zip code must correspond to the location of your desired TV and set top box.

This app is a shortcut to your Data usage settings so you can manage your data.

Tap the Apps icon → Usage Manager icon.

The Video application plays video files stored on your phone or microSD card.

1. Tap the Apps icon → Video icon. All videos that you have on your phone and memory card will be displayed.

2. Tap the video that you want to play. The video will begin to play.

3. The following video controls are available:

II: Pause the video.

Play icon: Start the video after being paused.

Rewind icon: Press and hold to rewind the video. Tap to go to previous video.

Fast-forward icon: Press and hold to fast-forward the video. Tap to go to next video.

Volume icon: Volume control.

PIP icon: PIP (Picture In Picture) view. The video will be played in a small window so you can use your phone for other purposes while watching the video. Double-tap screen to return to previous size.

Original size icon: Original size view. The video will be played in its original size.

Full-screen in ratio icon: Full-screen in ratio view. The video is enlarged as much as possible without becoming distorted.

Keep aspect ratio icon: Keep aspect ratio view.

Full-screen view icon: Full-screen view. The entire screen is used, which may cause some minor distortion.

Samsung Link icon: Streams the video to another device via Samsung Link.

Note: The screen view icons are a three-way toggle. The icon that is displayed, is the mode that will appear after the icon is tapped.

The Voice Recorder allows you to record an audio file up to one minute long and then immediately share it using Wi-Fi Direct, Messaging, Gmail, or via Bluetooth. Recording time will vary based on the available memory within the phone.

1. From the Home screen, tap the Apps icon → Voice recorder icon.

2. To start recording, tap Record icon and speak into the microphone.

3. During the recording process you can either tap Stop icon to stop and save the recording or Pause icon to temporarily halt the recording. After pausing, tap Record icon to resume recording. Once the audio recording has stopped, the message is automatically saved. Tap Cancel icon to cancel the recording without saving.

4. Tap List icon to display a list of current recordings.

5. Tap Recording quality icon to adjust the recording quality. Choose from: Normal, Interview, Conversation, or Voice memo.

6. Press menu icon for additional options.

The Google Voice Search application allows you to search the web using only your voice.

1. From the Home screen, tap the Apps icon → Voice Search icon.

2. When the Google Voice Search screen displays, speak the word or words that you would like to search for on the internet.

3. If the timer expires and the mic icon changes from red to gray, tap the mic icon and speak the word or words that you would like to search for on the internet. Results are displayed on your phone.

4. The following options are available at the bottom of your screen:

• Web: After selecting a different option, tap Web to return to the original search results.

• Images: Displays images for your search.

• News: Displays news items related to your search.

• MORE: After tapping More, sweep your screen to the left to see additional options such as Maps, Shopping, Videos, Blogs, Discussions, Books, Applications, and Phone.

Isis Mobile Wallet uses NFC technology to let you pay for purchases with just a tap of your phone. The Wallet holds credit, debit, and loyalty cards while organizing offers, deals, and promotions. Isis helps you manage your spending by showing you card balances and recent purchases for most of the cards in your Wallet.

Note: Isis Mobile Wallet requires a special SIM card. See your AT&T Customer Service representative for more information.

1. Make sure NFC is activated on your phone.

2. From the Home screen, tap the Apps icon → Wallet icon.

3. Sign into your Google Account if you haven’t already done so.

4. The first time you access Isis Wallet, you will be taken to the Play Store. Tap Update.

5. Tap Accept & download.

6. After the app is downloaded, tap Open to access the feature.

7. Follow the on-screen instructions to use Isis Mobile Wallet.

YouTube™ is a video sharing website on which users can upload and share videos. The site is used to display a wide variety of user-generated video content, including movie clips, TV clips, and music videos, as well as video content such as video blogging, informational shorts and other original videos.

Note: YouTube is a data-intensive feature. It is recommended that you upgrade to a large data plan to avoid additional data charges.

1. From the Home screen, tap the Apps icon → YouTube icon.

2. Tap the search field icon to search for specific videos, scroll down to browse through the main page thumbnails, or scroll to the bottom to explore additional options.

3. To view a video, tap an available preview thumbnail or tap the title link.

4. Press menu icon for additional options.

Note: It is not necessary to sign in to the YouTube site to view content. However, if you wish to sign in to access additional options, tap Sign in at the top left corner, enter your YouTube or Google username and password, and tap Sign in.

The YP (Yellowpages) application provides quick and ready access to businesses, map locations, and storage of your favorite searches. This application allows you to tap into local businesses, locations, and events, connecting you to your search in real-time.

Note: The first time you use YP, you will need to download the updated application from the Play Store. When the Play Store page displays, tap Update or Install then follow the on-screen instructions.

1. From the Home screen, tap the Apps icon → YP icon.

2. Sign on to your Google account if you have not already done so.

3. The first time you access YP, tap Take a Tour! to learn more about the YP app, or tap Skip.

4. Sign in using an email account or your Facebook account or tap Skip to Home.

5. Tap the What do you want to find? field to start a search.

6. Results will be displayed.

7. Follow the on-screen instructions to use the YP app.

8. Tap menu icon to display additional options.

The following icons show your Wi-Fi connection status at a glance:

Wi-Fi connected icon: Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP).

Wi-Fi available icon (with question mark): Displays when there is a Wi-Fi access point available but you are not connected to it. May also display if there is a communication issue with the target Wireless Access Point (WAP).

Wi-Fi Direct connected icon: Displays when connected to another device using Wi-Fi Direct.

The Advanced Wi-Fi menu allows you to set up many of your device’s advanced Wi-Fi services.

1. From any Home screen, tap Apps icon → Settings icon → Wi-Fi.

2. Tap Menu icon → Advanced.

The following options are available:

• Network notification: alerts you when a new WAP is available.

• Passpoint: allows you to connect to passpoint-enabled Wi-Fi Access Points automatically.

• Sort by: allows you to sort by alphabet or RSSI.

• Keep Wi-Fi on during sleep: allows you to specify when to disconnect from Wi-Fi.

• Always allow scanning: allows the Google location service and other apps to scan for networks, even when Wi-Fi is turned off.

• Auto connect: allows you to be automatically connected to an AT&T Wi-Fi Hotspot as soon as your phone detects it.

• Install certificates: allows you to install security certificates that you have on a MicroSD card.

• MAC address: view your device’s MAC address, required when connecting to some secured networks (not configurable).

• IP address: view your device’s IP address.

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection.

Note: See your service plan for applicable charges for Wi-Fi Direct.

1. From any Home screen, tap Apps icon → Settings icon → Wi-Fi.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON.

3. Tap Menu icon → Wi-Fi Direct. Your phone automatically scans for other Wi-Fi Direct devices.

4. Repeat steps 1 – 3 on the other device you want to connect with. The steps on a different model of phone, may be different.

5. Once the device you want to connect to is displayed, tap on it.

6. The other device has 2 minutes to tap Accept for the connection to be made.

7. Once connected, the other device will show as Connected in your list of Wi-Fi Direct devices and the Wi-Fi Direct icon will display at the top of your screen.

8. Tap Menu icon for additional options.

To share Videos, Photos, or other information with the connected device, follow these steps:

1. View the information that you want to share. For example, if you want to share a photo, find the photo in your camera viewer or My Files folder, then tap the Share, Share via, or Send via option.

2. Tap the Wi-Fi Direct option.

3. Tap the connected device name. For example, Android_49a.

4. Tap Done.

5. The file is transferred and the other device will receive a screen notification that a Wi-Fi file has been received. The file can be found at Apps → My Files → Device storage → Download folder.

Note: Depending on the other device model, the prompts and shared folder information may differ.

NFC (Near Field Communication) allows data exchange when you touch your device with another compatible device. This is used for applications such as S Beam. To activate NFC on your device, see “NFC” on page 89 of the PDF (this specific instruction is for context, page references are generally omitted in the final output as per user request).

When Android Beam is activated, you can beam app content to another NFC-capable device by holding the devices close together. You can beam browser pages, YouTube videos, contacts, and more.

When S Beam is activated, you can beam files to another NFC-capable device by holding the devices close together. You can beam images and videos from your Gallery, music files from your Music app, and more.

Tap and pay allows you to select the default payment application you want to use for making on-phone purchases.

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled handhelds, computers, printers, and wireless devices. The Bluetooth communication range is usually up to approximately 30 feet.

1. From any Home screen, tap Apps icon → Settings icon → Bluetooth.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth ON. When active, the Bluetooth icon appears within the Status area.

1. From the Home screen, tap Apps icon → Settings icon → Bluetooth.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth OFF.

The following icons show your Bluetooth connection status at a glance:

Bluetooth active icon: Displays when Bluetooth is active.

Bluetooth connected icon: Displays when Bluetooth is connected (paired) and communicating with another device.

1. From the Home screen, tap Apps icon → Settings icon → Bluetooth.

2. Verify your Bluetooth is ON.

1. From the Home screen, tap Apps icon → Settings icon → Bluetooth.

2. Tap Menu icon → Rename device.

3. After the About device screen displays, tap Device name.

4. Use the keyboard to modify your device name and tap OK.

1. From the Home screen, tap Apps icon → Settings icon → Bluetooth → Menu icon → Visibility timeout.

• Making your device visible allows it to be detected by other devices for pairing and communication.

2. Select a time that you would like your device visibility to timeout.

From the Home screen, tap Apps icon → Settings icon → Bluetooth → Menu icon → Received files. A list of all files received from Bluetooth is displayed.

1. From the Home screen, tap Apps icon → Settings icon → Bluetooth.

2. Verify your Bluetooth is ON.

3. From the Bluetooth settings page, tap Scan to search for visible external Bluetooth-compatible devices such as headsets, devices, printers, and computers.

The Bluetooth pairing process allows you to establish trusted connections between your device and another Bluetooth device. When you pair devices, they share a passkey, allowing for fast, secure connections while bypassing the discovery and authentication process.

To pair your device with another Bluetooth device:

1. Verify your Bluetooth is active.

2. Tap Scan. Your device will display a list of discovered in-range Bluetooth devices.

3. Tap a device from the list to initiate pairing.

4. Enter the passkey or PIN code, if needed, and tap OK.

5. The external device will then have to also accept the connection and enter your device’s PIN code. Once successfully paired to an external device, the paired icon appears within the Status area.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth compatible devices.

Note: Pairing between two Bluetooth devices is a one-time process. Once a pairing has been created, the devices will continue to recognize their partnership and exchange information without having to re-enter a passcode again.

Disconnecting a paired device breaks the connection between the device and your phone, but retains the knowledge of the pairing. At a later point when you wish to reconnect the device, there is no need to setup the connection information again.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap the previously paired device (from the bottom of the page).

3. Tap OK to confirm disconnection.

Note: Disconnections are manually done but often occur automatically if the paired device goes out of range of your phone or it is powered off.

Deleting a device from your list removes its “connection record” and upon reconnection would require that you re-enter all the previous pairing information.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap the settings icon next to the previously paired device. This opens the connected device’s menu options.

3. Tap Unpair to delete the paired device.

4. Tap Rename to change the name of the paired device.

5. Tap Call audio to enable or disable call audio from the paired device.

6. Tap Media audio to enable or disable media audio from the paired device.

This option allows you to share your device’s mobile data connection via a direct USB connection between your device and a single computer.

Note: You cannot mount your device’s microSD card to your computer while using the USB tethering feature. If additional software or USB drivers are required, you may need to obtain them.

To connect using USB Tethering:

1. From the Home screen, tap Apps icon → Settings icon → Tethering and Wi-Fi hotspot.

2. Plug in the USB cable between your computer and your device.

3. Tap USB tethering from the Tethering menu. This places a green check mark next to the entry and activates the feature. A Tethering or Hotspot active notification briefly appears on the screen. Look for the Tethering active icon in the Status bar area of the screen.

4. Read the on-screen notification regarding data use and tap OK.

To disconnect tethering:

1. From the Tethering and Wi-Fi hotspot screen, tap USB tethering from the Tethering menu to remove the check mark and deactivate the feature.

2. Remove the USB cable from the device.

This feature allows you to turn your device into a Wi-Fi hotspot. The feature works best when used in conjunction with 4G/LTE data services (although 3G service can also be used). The Mobile Hotspot connectivity is a wireless version of this same functionality and allows you to provide Internet connectivity to multiple devices.

Important! The Mobile Hotspot service cannot be active when device is connected to Wi-Fi. Please disconnect your Wi-Fi connection prior to activating this service.

Note: You must have a tethering plan on your account in order to use the Mobile Hotspot.

To activate the Mobile Hotspot service:

1. From the Home screen, tap Apps icon → Settings icon → Tethering and Wi-Fi hotspot.

2. Tap Mobile Hotspot.

3. In a single motion touch and slide the Mobile Hotspot slider to the right to turn it on.

4. Read the on-screen notification regarding data use and tap OK.

5. Edit the Network SSID name and then write it down.

6. Verify the Security field is set to WPA2 PSK.

7. Enter a new password then write it down. Additional options include Show password and Show advanced options.

8. Tap Save to store the new settings.

9. Confirm the Mobile Hotspot active icon appears at the top of the screen.

Note: By default, the connection is not secured.

Note: Using your Mobile Hotspot drains your device’s battery much faster. The best way to keep using the device as a Hotspot is by connecting to a Charger.

To connect to the Hotspot:

1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).

2. Scan for Wi-Fi networks from the external device and select your device’s Mobile Hotspot name from the network list.

• The SSID name for your device’s hotspot is determined by what you entered into the Network SSID field.

• You can change the name by tapping Menu icon → Configure hotspot → Network SSID and changing the entry.

3. Select this Hotspot and follow your on-screen instructions to complete the connection.

4. Launch your Web browser to confirm you have an Internet connection.

1. From the Tethering and Wi-Fi hotspot screen, tap Mobile Hotspot → Menu icon → Configure hotspot.

2. Tap the Security field and select WPA2 PSK.

3. With security enabled, delete the previous password and enter a new one into the Password field.

Important! The more complex the password, the harder it will be for intruders to break your security. It is recommended that you not use names, birthdays, or other personal information.

4. Tap Save to store the new settings.

This feature allows you to provide MAC filtering on your device. This is similar to a “VIP list” where only device on the list are allowed access.

1. From the Tethering and Wi-Fi hotspot screen, tap Menu icon → Allowed devices → + (Add device) to add devices to the allowed for connection list.

2. Enter the Device name and Mac address.

3. Tap OK to save the new device.

This manual only addresses applications that have been loaded on your device as of the date of purchase. Information concerning third party applications that you may choose to download from the Google Play Store or otherwise should be obtained from the application provider directly and not from Samsung.

Tip: To open applications quickly, add the icons of frequently-used applications to one of the Home screens.

To access the Applications, tap Apps icon from any Home screen.

Press the convenience key on the side of the Galaxy S 5 Active to launch all your outdoor activity-related features, all on one application screen. With a compass to a stopwatch and more, Activity Zone makes being outside easier.

1. From the Home screen, tap Apps icon → Activity Zone icon. The Activity Zone screen is displayed.

2. The following features are available:

• Barometer: displays your elevation and atmospheric pressure

• Compass: displays the compass heading that your device is pointing to and also your latitude and longitude.

• Flashlight: allows you to use your device as a flash light. You can also set it to blink and adjust the brightness.

• Stopwatch: allows you to use your device as a stopwatch. You can also set multiple lap times.

3. Follow the on-screen instructions to use each feature.

4. Press Menu icon for additional options.

AT&T FamilyMap provides peace of mind by being able to conveniently locate a family member from your wireless phone or PC and know that your family’s location information is secure and private.

Note: FamilyMap requires a paid subscription. To sign up for service, you may need to contact AT&T Customer Service Representative.

1. From the Home screen, tap Apps icon → AT&T FamilyMap icon.

2. Sign on to your Google account if you have not already done so.

3. Follow the on-screen instructions.

AT&T Locker allows you to store, share, and sync all of your photos, videos, and documents in one safe, convenient place; the AT&T cloud.

1. Sign on to your Google account if you are not already signed on.

2. From the Home screen, tap Apps icon → AT&T Locker icon.

3. At the AT&T Locker home screen, tap Sign Up to create an account or tap Log In if you already have an account.

4. Follow the on-screen instructions to use AT&T Locker.

With the AT&T Mobile Locate app you can access the Mobile Protection Pack and with a paid subscription, replace your phone if it is lost or damaged, locate your phone if it is lost, and receive backup and phone support.

Important! In order to take advantage of the AT&T Mobile Locate application, you must purchase the Mobile Protection Pack within 30 days of purchase/activation of a new device.

1. Purchase the application if required.

2. From the Home screen, tap Apps icon → AT&T Mobile Locate icon.

3. Follow the on-screen instructions to use AT&T Mobile Locate.

AT&T Navigator provides you with access to real-time GPS-driven applications. These programs not only allow you to achieve turn-by-turn navigation, but also access local searches.

Important! You must have a data plan to use this feature.

Note: These services require the purchase of a subscription.

To launch the AT&T Navigator application, follow these steps:

1. From the Home screen, tap Apps icon → AT&T Navigator icon.

2. Read the Terms of Service and tap I Accept to acknowledge the terms of use. The first time that you use AT&T Navigator, the necessary files will be downloaded. The AT&T Navigator main screen displays.

3. Tap an AT&T Navigator plan that you choose to purchase.

4. Follow the on-screen instructions.

1. From the Home screen, tap Apps icon → Beats Music icon.

2. Sign on to your Google account if you are not already signed on.

3. Follow the on-screen instructions to use Beats Music.

With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication, and division. The Calculator also keeps a history of recent calculations.

1. From the Home screen, tap Apps icon → Calculator icon.

2. Enter the first number using the on-screen numeric keys.

3. Enter the operation for your calculation by tapping the corresponding on-screen arithmetic function key.

4. Enter the second number.

5. To view the result, tap the equal sign (=).

6. To view calculator history, tap the history icon located at the top right of the calculator buttons. A history of your past calculations is displayed. Tap the keypad icon to display the calculator keypad.

7. Turn your phone sideways to the landscape position to display the scientific calculator.

With the Calendar feature, you can consult the calendar by day, week, or month, create events, and set an alarm to act as a reminder, if necessary.

To access the Calendar:

1. From the Home screen, tap Apps icon → Calendar icon.

2. To change your calendar view tap Month (or current view) at the top left of your screen and select one of the following:

• Year: displays the Year view.

• Month: displays the Month view.

• Month and agenda: displays the Month view with your events listed at the bottom.

• Week: displays the Week view.

• Day: displays the Day view.

• Agenda: displays a list of your Events.

3. Tap + (Create event) to create a new Calendar event.

4. Tap Today to display the current date indicated by a blue box.

5. Tap Menu icon and select one of the following options:

• Go to: displays a specific date.

• Delete: allows you to delete All events, All events before today, or an individual event.

• Search: allows you to search within your current events.

• Calendars: allows you to view the current Calendar accounts.

• Sync: allows you to synchronize your calendar with one or all of your accounts. This option only appears when an account has been opened.

• Settings: displays a list of configurable settings.

1. From any Calendar view, Tap Menu icon → Settings.

2. Tap First day of week and select either Locale default, Saturday, Sunday or Monday.

3. Tap Show week numbers to display the week numbers along the side of the week entries.

4. Tap Hide declined events to activate this option. A check mark indicates selection.

5. Tap Hide completed tasks to activate this option. A check mark indicates selection.

6. Tap Weather to have weather symbols displayed on your calendar. A check mark indicates selection.

7. Tap Lock time zone (to lock event time based on your current user-selected time zone). Select a time zone from within the Select time zone field. Also tap View today according to and select an option.

8. Tap Select alert type to adjust the event notification method. Choose from: Pop-up notifications, Status bar notifications, or Off.

9. Tap Notification sound to assign a ringtone to a calendar event notification.

10. Tap Vibration to set the Event notification tone to vibrate.

11. Tap Quick responses to select quick responses to emailing guests.

You can take photographs by using the built-in camera functionality. Your 16 megapixel camera produces photos in JPEG format.

Important! Do not take photos of people without their permission. Do not take photos in places where cameras are not allowed. Do not take photos in places where you may interfere with another person’s privacy.

Using the Camera:

Taking pictures with your device’s built-in camera is as simple as choosing a subject, pointing the camera, then pressing the camera key.

Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.

1. From the main Home screen, tap Camera icon to activate the camera mode.

2. Using the phone’s main display screen as a viewfinder, adjust the image by aiming the camera at the subject.

3. If desired, before taking the photo, you can tap on-screen icons to access various camera options and settings.

4. You can also tap the screen to move the focus to the area you touch.

5. Press the Camera key (shutter icon) until the shutter sounds. (The picture is automatically stored within your designated storage location. If no microSD is installed, all pictures are stored on the Phone.)

6. You can also use the Up and Down Volume keys to take pictures. Press rapidly for continuous shooting.

7. Pinch the screen to zoom out or pinch outwards to zoom in.

8. While viewing a picture, after you have taken it, pinch the screen outwards to zoom in or pinch the screen inwards to zoom out. You can magnify the picture up to x4.

9. Press Back key to return to the viewfinder.

There are many different camera modes that you can use to help optimize your photos depending on the conditions and your experience.

1. From the camera viewfinder, tap the Mode button to change the mode to one of the following:

• Auto: Automatically adjusts your camera to optimize color and brightness. This is the default setting.

• Beauty face: Use this to take photos with lightened faces for gentler images.

• Panorama: use this to take wide panoramic photos. Press the Shutter button to take a photo, and then move the camera in any direction. When the blue frame aligns with the preview screen, the camera automatically takes another shot in the panoramic sequence. To stop shooting, press the Shutter button again.

• Virtual tour: use this mode to take a virtual 3D shot of your surroundings. Follow the on-screen instructions.

• Dual camera: allows you to activate both the front and rear cameras simultaneously.

• Shot & more: use this burst shot mode to combine the best of burst shots with other features. Effects can be directly applied right after taking these pictures. The following effects are available in this mode, Best photo, Best face, Eraser, Drama, and Panning shot.

• Manage modes: allows you to select the camera modes that will be displayed when you tap the Mode icon.

• Download: allows you to download various camera features from Samsung Apps.

With the Dual Camera feature, you can take a picture with both the front and rear cameras at the same time.

To take a Dual Camera picture:

1. From the camera viewfinder, tap the Mode icon then tap Dual camera. The camera viewfinder displays an image from the front-facing camera within a postage stamp picture frame on top of the main image displayed from the rear-facing camera.

2. Press the Camera key (shutter icon) to take the picture.

To resize the front camera image: Touch the postage stamp picture frame until the resize handles appear, then drag a corner to enlarge the image.

To reposition the front camera image: Touch the postage stamp picture frame to detach it and then move it to a desired location.

This section describes the different settings that you can configure on your camera. Not all of the following options are available in both still camera and video camera modes. The available options vary by mode.

1. From the viewfinder, tap the Settings icon.

2. The following settings are available:

• Picture size: Select a resolution for photos. Use higher resolution for higher quality. Higher resolution photos take up more memory.

• Burst shots: allows several photographs to be captured in quick succession by touching and holding the Camera button.

• Picture stabilization: allows you to enable the stabilization feature to help adjust for jitter during picture taking.

• Face detection: allows you to adjust the camera focus based on face detection technology.

• ISO: determines how sensitive the light meter is on your digital camera. Choose from Auto, 100, 200, 400, or 800. Use a lower ISO number to make your camera less sensitive to light, a higher ISO number to take photos with less light, or Auto to let the camera automatically adjust the ISO for each of your shots.

• Metering modes: allows you to set how the camera measures or meters the light source: Center-weighted, Matrix, or Spot.

• Tap to take pics.: allows you enable the ability to also take images by tapping on the screen.

• Selective focus: automatically adjusts your pictures so that the objects you want are in focus.

• Video size: select a resolution for videos. Use higher resolution for higher quality. Higher resolution videos take up more memory. Highest quality is UHD (4K video).

• Recording mode: select a resolution for videos. Choose from: Normal, Limit for MMS, Slow motion, Fast motion, or Smooth motion.

• Video stabilization: activate or deactivate Optical Image Stabilization.

• Audio zoom: enable the feature where the device can focus on an audio source that is not directly in front of the device.

• Effects: provides access to pre-installed and downloaded effects. Default effects include: No effect, Vignette, Vintage, Faded color, Grayscale, Sepia, Tint, Turquoise, Cartoon, Fisheye, Moody, Oil pastel, Rugged, Download (additional effects), and Manage effects.

• Flash: activate or deactivate the flash.

• Timer: Use this for delayed-time shots. You can set the timer to Off, 2 sec, 5 sec, or 10 sec.

• HDR: use this to take photos with richer colors and contrasts by merging images taken at different exposure levels.

• Location tags: attach a GPS location tag to the photo. To improve GPS signals, avoid shooting in locations where the signal may be obstructed, such as between buildings or in low-lying areas, or in poor weather conditions. Your location may appear on your photos when you upload them to the Internet. To avoid this, deactivate the GPS tag setting.

• Storage location: select the memory location for storage.

• Review pics/videos: set this option if you want to view each picture after you take it. Select a time value.

• Remote viewfinder: activates/deactivates the feature that allows you to take pictures using the viewfinder of a Wi-Fi direct connected device.

• White balance: Select an appropriate white balance, so images have a true-to-life color range. The settings are designed for specific lighting situations. These settings are similar to the heat range for white-balance exposure in professional cameras.

• Exposure value: allows you to adjust the brightness level by moving the slider.

• Grid lines: display viewfinder grids to help composition when selecting subjects.

• Shutter sound: turn the shutter sound on or off.

• Volume key: allows you to set the key to use to raise or lower the volume.

• Voice control: activates/deactivates voice control feature that allows you to verbally take a photo.

• Help: provides an on-screen set of help topics.

• Reset settings: Reset the camera settings.

After you take a photo, you can access various options from the Image Viewer. The Image Viewer uses your Gallery.

In addition to taking photos, the camera also doubles as a camcorder that also allows you to record, view, and send videos.

Note: The camera may not be able to properly record videos to a memory card with a slow transfer speed.

Shooting Video:

Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your subject with sufficient light by having the light source behind you.

1. From the main Home screen, tap Camera icon to activate the camera mode.

2. Using the camera’s main display screen as a viewfinder, adjust the image by aiming the camcorder at the subject.

3. Before you take a video, use the Volume control buttons to zoom in or out. You can magnify the video up to x4 (400 percent).

4. Tap the Video key (record icon) to begin shooting video. The red light will blink while recording.

5. You can tap the screen to move the focus to the area you touch.

6. Tap the Pause key (pause icon) to stop the recording and save the video file to your Camera folder.

7. Tap the Stop key (stop icon) to stop the recording and save the video file to your Camera folder.

8. Once the file has been saved, tap the image viewer, then tap Play icon to play your video.

9. Press Back key to return to the viewer.

After you take a video, you can access various options from the Image Viewer. The Image Viewer uses your Gallery and the Video player.

With the ChatON application, you can interact with friends and family with text, images, hand-written notes and video shared instantly. You can chat in groups, while a Web client will allow the easy sharing of content and conversations between your phone and PC.

1. From the Home screen, tap Apps icon → ChatON icon.

2. Sign on to your Samsung account if you have not already done so.

3. Read the introduction and tap Next.

4. Follow the on-screen instructions to register and use the ChatON app.

Note: The first time you use the ChatON app, you will need to download the updated application from the Play Store. When the Play Store page displays, tap Update then follow the on-screen instructions.

The Google Chrome app allows you to use the Google Chrome web browser on your phone.

1. From the Home screen, tap Apps icon → Chrome icon.

2. Read the Google Chrome Terms of Service and tap Accept and Continue.

3. If you have an existing Chrome account, tap Sign in to bring your open tabs, bookmarks, and omnibox data from your computer to your phone, otherwise tap No thanks.

4. Follow the on-screen instructions to use Google Chrome.

This feature allows you to set an alarm to ring at a specific time.

1. From the Home screen, tap Apps icon → Clock icon → Alarm tab → Create alarm + icon.

2. Tap Up or Down arrows to set the new time for the alarm to sound. Tap AM or PM.

3. The following settings are available:

• Repeat weekly: Tap the Repeat weekly checkbox to have the alarm repeat on the same day every week.

• Alarm type: sets the way in which the alarm sounds when activated (Sound, Vibration, or Vibration and sound).

• Alarm tone: sets the sound file which is played when the alarm is activated. Select an option or tap Add for additional options.

• Alarm volume: drag the slider to adjust the alarm’s volume.

• Snooze: use this option to set a Duration (3, 5, 10, 15, or 30 Minutes) and Snooze repeat (1, 2, 3, 5, or 10 Times). Tap the ON/OFF slider to activate.

• Smart alarm: tracks body movements and calculates the best time for sounding the alarm. Place the phone somewhere on your bed then the phone’s movement sensor (also known as accelerometer) is sensitive enough to work from any part of the bed. Set the Interval and the Tone. Tap the ON/OFF slider to activate.

• Name: allows you to use a specific name for the alarm. The name will appear on the display when the alarm activates.

4. Tap Save to store the alarm details.

To stop an alarm when it sounds, touch and sweep the X icon to the right.

To activate the Snooze feature after an alarm sounds, touch and sweep the Zz icon to the left. Snooze must first be set in the alarm settings.

To delete an alarm, follow these steps:

1. From the Home screen, tap Apps icon → Clock icon → Alarm tab.

2. Press and hold any alarm. All of your alarms are displayed in a list. Tap the alarms you wish to delete to create a green checkmark then tap Delete icon. Tap Select all to delete all alarms.

3. Tap Undo if you would like to undelete an alarm you just deleted.

World Clock allows you to view the time of day or night in other parts of the world. World Clock displays time in hundreds of different cities, within all 24 time zones around the world.

1. From the Home screen, tap Apps icon → Clock icon → World Clock tab. The clock for your time zone is displayed.

2. Tap + Add city to add another city to the World Clock.

3. Scroll through the list of cities to find the city you want to add, or tap the Search bar and use the keypad to enter a city to search for.

4. Tap the city you want to add. The clock for that city will display.

5. To set Daylight Savings time, press and hold a city, then tap DST settings.

6. Select Automatic, Turn off, or Turn on.

7. If Daylight Savings Time is selected, a DST icon will appear next to the World Clock listing.

1. From the Home screen, tap Apps icon → Clock icon → World Clock tab → Menu icon → Delete.

2. Tap the city clocks you wish to delete to create a checkmark.

3. Tap Delete. Tap Select all to delete all World Clocks.

You can use this option to measure intervals of time.

1. From the Home screen, tap Apps icon → Clock icon → Stopwatch tab.

2. Tap Start to start the stopwatch and tap Lap to mark a unit of time per lap.

3. Tap Stop to stop the stopwatch.

4. Tap Restart to continue or tap Reset to erase all times recorded.

You can use this option to set a countdown timer. Use a timer to count down to an event based on a preset time length (hours, minutes, and seconds).

1. From the Home screen, tap Apps icon → Clock icon → Timer tab.

2. To change the time, tap the time inside the circle. The Seconds field is highlighted and set to 30 seconds. Use the keypad to set the number of seconds you want.

3. Tap the Minutes field to set minutes.

4. Tap the Hours field to set hours if desired. As you tap different fields, they will become highlighted.

5. Tap Start to begin the timer and tap Stop to pause the timer.

6. After stopping, tap Restart to continue or tap Reset to set the timer back to the original setting.

You can manage your daily contacts by storing their name and number in your Address Book. Address Book entries can be sorted by name, entry, or group. You can also synchronize your phone Address Book with AT&T Address Book, the network backup service.

Device Help provides online information to help with your device questions.

1. From the Home screen, tap Apps icon → Device Help icon. The Device Help screen is displayed.

2. Follow the on-screen instructions for accessing helpful information.

With the Google Drive application, everything that you add to your Drive from work or home is also available on your device. You can create and edit documents on your device and the changes are saved everywhere.

1. Sign on to your Google account.

2. From the Home screen, tap Apps icon → Drive icon.

3. Follow the on-screen instructions to use Google Drive.

4. Press Menu icon → Help for more information.

With the AT&T DriveMode application, you can set your phone to auto reply when you are driving and don’t want to answer the phone. You can set auto reply to Messages, Emails, and Phone Calls. You can also allow up to five of your contacts to contact you while you are in Drive mode.

1. From the Home screen, tap Apps icon → DriveMode icon. The AT&T DriveMode screen is displayed.

2. Tap on View our Terms & Conditions and View our Privacy Policy.

3. Read the information and tap Continue.

4. Follow the on-screen instructions to set up your AT&T DriveMode options.

Email enables you to review and create email using various email services. You can also receive message alerts when you receive an important email.

1. From the Home screen, tap Email icon. Your accounts screen displays with an Email setup screen displayed.

2. Enter you email address in the Email address field.

3. Enter your password in the Password field.

4. If you want to see your password as it is being typed, tap Show password to create a checkmark.

5. Tap Next.

6. At the Account options screen, tap any of the options you would like.

7. Tap Next.

8. Enter a name for this email account (optional).

9. Tap Done.

Use the following procedure to configure your phone to synchronize with a corporate email account.

1. From the Home screen, tap Email icon. Your accounts screen displays with an Email setup screen displayed.

2. Enter you email address in the Email address field.

3. Enter your password in the Password field.

4. If you want to see your password as it is being typed, tap Show password to create a checkmark.

5. If you want all of your emails sent from this email account by default, tap the checkbox to create a checkmark. This checkbox only appears if you have previously set up an email account.

6. Tap Manual setup.

7. Tap the Microsoft Exchange ActiveSync field.

8. Enter all the Exchange server information, Domain, User name and Password, then tap Next.

9. At the Activation prompt, tap OK. The Account options screen is displayed.

10. Enter the desired information in the different fields, then tap Next.

11. Enter an Account name for this account (Optional) and tap Done. Wait for the Inbox to synchronize before use.

12. Press Menu icon → Settings to change the account settings.

To create additional email accounts after setting up your first account, follow these steps:

1. From the Home screen, tap Email icon. Your Email screen displays showing your emails from the active account.

2. Tap the Inbox button at the top of your screen.

3. Tap Manage accounts.

4. Tap Add account to add another email account.

5. Enter the information required to set up another account.

1. From the Home screen, tap Email icon. Your Email screen displays showing your emails from the active account.

2. Tap the Inbox button at the top of your screen. Your Email accounts screen is displayed.

3. Tap the Email account Inbox you would like to switch to. You can also select Combined inbox which will display email messages from all accounts.

4. The new Email account is displayed.

This application creates a personalized digital magazine out of everything being shared with you. Access news stories, personal feeds and other related material. Flip through your Facebook newsfeed, tweets from your Twitter account, photos from friends and much more.

1. From the Home screen, tap Apps icon → Flipboard icon.

2. Swipe the screen up and select some on-screen categories that you are interested in, then follow the on-screen instructions to build your flipboard. – or – Tap Tap to create or sign in to log into your previously created profile.

3. Follow the on-screen instructions.

The Gallery is where you view photos and play back videos. For photos, you can also perform basic editing tasks, view a slideshow, set photos as wallpaper or contact image, and share as a picture message.

1. Tap Apps icon → Gallery icon. All of the Albums that hold your pictures and videos will be displayed with folder name and number of files.

2. Tap an Album and thumbnails of the contents will be displayed.

Note: If your device displays that the memory is full when you access Gallery, delete some of the files by using My Files or other file management applications and try again.

1. From the main gallery, press Menu icon → Slideshow to see a slideshow of all of your pictures.

2. Tap a thumbnail to view a single picture.

Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them.

3. The following options are available at the top of the screen when your phone is held horizontally:

• Change player: allows you to change the device the picture is displayed on if you are using Samsung Link.

• Share via: allows you to share the picture via various applications.

• Delete: allows you to delete the picture.

• Camera: activates the camera.

4. Press Menu icon for additional options.

Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them.

1. Tap a video to select it.

2. Tap Play icon to play the video.

3. Press Menu icon for additional options.

This feature (when activated via NFC) allows you to beam large files directly to another compatible device that is in direct contact. These files can be larger, such as Videos, HD pictures, and other large files. You can beam images and videos from your gallery, music files from your Music, and more.

1. From the Home screen, tap Apps icon → Settings icon → NFC. Ensure NFC is active.

2. If not already active, in a single motion touch and slide the NFC slider to the right to turn it on.

3. Tap S Beam and make sure the feature is turned on.

4. If not already active, in a single motion touch and slide the S Beam slider to the right to turn it on.

5. On the source device (containing the desired image or video), tap Apps icon → Gallery icon.

6. Locate and tap the selected image to open it in the preview window.

Important! Neither device must be in Lock mode or displaying the Lock screen. They must both be active and unlocked. It is recommended that the target device be on the Home screen.

7. Place the two active NFC-enabled devices back to back to begin.

8. From the Touch to beam screen, tap the reduced image preview to begin the transfer.

9. When prompted, separate the two devices. After a few seconds (depending on file size) the recipient with then see the transferred file displayed on their screen.

Note: If the Touch to beam screen does not appear on the source device: Pull them apart. Verify the image is visible in the preview window on the source device (providing the file). Place them together again.

1. On the source device (containing the desired image or video), tap Apps icon → Gallery icon.

2. Locate the selected folder.

3. Touch and hold the first image and place a checkmark on it and all desired images.

4. Place the two active NFC-enabled devices back to back to begin.

5. From the Touch to beam screen, tap the reduced image preview to begin the transfer.

6. When prompted, separate the two devices.

7. The picture(s) is transferred to the other device.

You can edit your photos using the built-in Photo editor application on your device. The photo editor application provides basic editing functions for pictures that you take on your phone. Along with basic image tuning like brightness, contrast, and color it also provides a wide variety of effects used for editing the picture.

1. From the Home screen, tap Apps icon → Gallery icon.

2. Select a folder location and tap a file to open it.

3. With the image displayed, press Menu icon → Edit to launch the Photo editor.

Note: To select the picture area, touch and hold the current picture.

4. Use the following editor controls to edit your picture:

Previous (Undo icon): lets you undo the current operation.

Next (Redo icon): lets you redo the previous operation.

Cancel/Delete (X icon): exits the current photo editing session.

Save (Disk icon): stores the currently edited photo.

Adjustment (Wrench icon): provide the following adjustment options:

• Rotate: allows you to rotate a photo in all 4 directions. You can also mirror image a photo.

• Crop: allows you to crop (cut-out) an area of a photo.

• Resize: allows you to crop (cut-out) an area of a photo.

Tone (Palette icon): provide the following tonal options: Brightness, Contrast, Saturation, Red, Green, Blue, Temperature, and Hue.

Effect (Sparkle icon): allows you to add various effects to your photo.

Portrait (Face icon): allows you to apply various face correction effects such as: Remove red, Brighten face, Airbrush, or Out-of-focus.

Decoration (Star/wand icon): provides creative features such as: Sticker, Label, Frame, Drawing, and Image.

5. Press Menu icon to access the following options:

• Clipboard: allows you to select images from your clipboard to add to your picture.

• Share via: allows you to share your saved photo via various applications.

• Set as: assigns the currently saved image as either a: Contact photo, Home and lock screens, Home screen, Lock screen, or wallpaper.

Gmail is a web-based email service. Gmail is configured when you first set up your phone. Depending on your synchronization settings, Gmail can automatically synchronize with your Gmail account on the web.

Note: You must sign in to your Gmail account in order to access Gmail.

1. Sign on to your Google account if you are not already signed on.

2. From the Home screen, tap Apps icon → Gmail icon.

3. Follow the on-screen instructions. The Inbox loads conversations and email.

1. From the Gmail Inbox, tap the compose icon (+) at the bottom of the screen to create a new message.

2. Enter the recipients Email address in the To field. Separate multiple recipient email addresses with a comma.

3. Tap Menu icon and select Add Cc/Bcc to add a carbon or blind copy.

4. Enter the subject of this message in the Subject field.

5. Tap the Compose email field and begin composing your message.

6. Tap Send icon to send.

1. From the Gmail Inbox, tap a message to view it.

2. Press Menu icon for additional options.

The Google Search application provides you an on-screen Internet search engine powered by Google™. The Google Search application is the same on-screen Internet search engine that is on the Google Search Bar on your main Home screen.

1. From the Home screen, tap Apps icon → Google icon (g).

2. Use the on-screen keypad to enter the item you want to search for, then tap the search icon.

3. Tap the microphone icon to use Google Voice Search. Follow the on-screen instructions.

As Google has become more intertwined with other applications, this menu provides a quick and ready access point to configure preferences for Google+, Location, etc. You can also use the Search function to initiate a Google Search from this menu.

1. From the Home screen, tap Apps icon → Google Settings icon (g with gear).

2. Tap one of the Google Settings options.

3. Follow the on-screen prompts to modify your Google Settings.

Google+ makes messaging and sharing with your friends a lot easier. You can set up Circles of friends, visit the Stream to get updates from your Circles, use Messenger for fast messaging with everyone in your Circles, or use Instant Upload to automatically upload videos and photos to your own private album on Google+.

1. Sign on to your Google account.

2. From the Home screen, tap Apps icon → Google+ icon (g+).

3. Select the account you want to use to sign in to Google+. – or – Tap Add account to create another account.

4. Follow the on-screen instructions to use Google+.

Hangouts is a free Windows and web-based application for instant messaging offered by Google. You can connect with your friends across computers and various Android devices. You can have conversations or video calls with up to 10 friends.

Note: The first time you use Hangouts, you will need to download the updated application from the Play Store. When the Play Store page displays, tap Update.

1. Log on to your Google account if you have not already done so.

2. From the Home screen, tap Apps icon → Hangouts icon.

3. The first time you access Hangouts, tap Confirm to confirm your mobile number. If the number is not correct, tap Edit Number to change it.

4. Begin using Hangouts.

5. Press Menu icon → Help for more information on using Hangouts.

The Internet is your access to the mobile web. This section explains how to navigate your Internet Browser and introduces you to the basic features.

To access the Browser: From the Home screen, tap Internet icon. The Quick access homepage displays.

Navigating with the Browser:

1. To select an item, tap an entry.

2. To scroll through a website, sweep the screen with your finger in an up or down motion.

3. Sweep the screen left to right to move laterally across a web page.

4. To return to a previous page, press the back arrow icon.

5. To move forward to a web page, press the forward arrow icon.

Browser Options: From any web page, press Menu icon to access your browser options.

Internet Settings: From any web page, press Menu icon → Settings to access your Internet settings.

You can access a website quickly by entering the URL. Websites are optimized for viewing on your phone.

To enter a URL and go to a particular website, follow these steps:

1. Tap the Search or enter URL field at the top of your screen.

2. Enter the URL using the on-screen keypad. The website displays.

To perform an internet search using keywords, follow these steps:

1. Tap the Search or enter URL field at the top of the browser.

2. Enter the keyword(s) to search using the on-screen keypad and tap Go.

3. Tap a link to view the website.

You can have up to eight Internet windows open at one time.

To add a new window, follow these steps:

1. From your browser, tap Menu icon → New window. A new browser window is opened.

2. Tap the Windows icon (displays number of open windows) to see thumbnails of all open windows.

3. Tap a window listing to open up that Internet window.

4. Tap X at the top right corner of the web page thumbnail to delete the window.

The incognito feature allows you to view Internet sites outside of normal browsing. Pages viewed in this incognito window won’t appear within your browser history or search history, and no traces (such as cookies) are left on your device.

Note: Any downloaded files will be preserved and will stay on your device after you exit the incognito mode.

To add a new incognito window:

1. From your browser, tap Menu icon → Incognito mode.

2. At the information prompt, tap OK.

3. A new browser window displays.

To exit from the incognito window:

1. From your browser window, tap the Windows icon.

2. Scroll across the available windows and locate the incognito window. The incognito icon appears in the upper-left of the new browser window while you are in this mode.

3. Tap X next to the incognito listing to delete this window.

While navigating a website, you can bookmark a site to quickly and easily access it at a future time. The URLs (website addresses) of the bookmarked sites are displayed in the Bookmarks page. From the Bookmarks page you can also view your Most visited websites and view your History.

1. From the Home webpage, tap Bookmarks icon located at the bottom right of the screen. The Bookmarks page is displayed.

2. Press Menu icon to display the Bookmark options.

1. From any webpage, tap Star icon → + icon.

2. Use the on-screen keypad to enter the Name, Address, and Location.

3. Tap Save.

4. “Saved to bookmarks” will appear at the bottom of the page.

Keeper is a secure password manager for your phone and works seamlessly across your mobile phones, tablets, computers, and web browsers.

1. From the Home screen, tap Apps icon → Keeper icon.

2. The first time you access the Keeper app, read the Terms and Conditions and tap Agree.

3. Follow the on-screen instructions to set up your account and use Keeper.

Lookout Security™ provides mobile device-specific security features that are coupled with a minimal performance hit. Lookout Mobile Security provides key security options that are unique to the mobile market. Along with the antivirus and anti-malware tech, there’s a lost and stolen phone locator service, an application privacy adviser, and a backup service.

1. From the Home screen, tap Apps icon → Lookout Security icon.

2. Read the on-screen information, then tap Get started.

3. Read the on-screen descriptions and activate those desired features. Tap Next to progress to the next screen.

4. Tap New user or Existing user.

5. Create a Lookout account by entering an email address and account password.

6. Re-enter the password and tap Start Lookout.

7. Follow the on-screen instructions.

Depending on your location, you can view basic, custom, and satellite maps and local business information, including location, contact information, and driving directions. You can also post public messages about a location and track your friends.

Important! Before using Google Maps you must have at least an active data connection. The Maps application does not cover every country or city.

To receive better GPS signals, avoid using your device in the following conditions:

• inside a building or between buildings

• in a tunnel or underground passage

• in poor weather

• around high-voltage or electromagnetic fields

• in a vehicle with tinted windows

Using Maps:

1. From the Home screen, tap Apps icon → Maps icon. A map will display with your location in the very center.

2. Follow the on-screen instructions to use the Maps application.

The Memo application allows you to write memos that can include text, audio, and images.

1. From the Home screen, tap Apps icon → Memo icon.

2. Tap Options icon to reveal available Memo categories or Manage categories.

3. Tap Search icon to search for a matching text string within your available memos. – or – Tap + Tap to create memo to create a new memo. – or – Tap Menu icon and select one of the following options:

• Select: allows you to select an available memo.

• Delete: allows you to delete selected memos.

• Account: allows you to access an available account.

AT&T Messages brings your texts, calls, and voicemail messages together into a single conversation thread and is accessible by phone or computer.

1. From the Home screen, tap Apps icon → Messages icon.

2. The first time you use AT&T Messages, tap Update AT&T Messages.

3. Sign on to your Google account if you are not already signed on.

Note: The first time you use the AT&T Messages app, you will need to download the updated application from the Play Store. When the Play Store page displays, tap Update then follow the on-screen instructions.

4. At the Legal stuff… screen, tap Accept to continue.

5. Tap Call Voicemail to record a personal greeting and set up your app.

6. Follow the on-screen instructions to use the AT&T Messages app.

This application allows you to share your phone’s mobile data connection via USB or as a portable Wi-Fi hotspot.

Mobile TV is a subscription service that allows you to watch your favorite TV shows using your handset.

Note: This feature requires a paid subscription. See your AT&T Customer Service Representative for more information.

1. From the Home screen, tap Apps icon → Mobile TV icon.

2. Read the 7 day Trial for Mobile TV screen and tap Accept & Start Trial to continue or Exit to exit.

3. The Mobile TV main page displays. Follow the on-screen instructions to watch TV.

Note: Mobile TV will use a large amount of data and you are responsible for all data charges. It is strongly recommended that you upgrade to a large data plan in addition to this purchase.

Music is an application that can play music files. Music supports files with extensions AAC, AAC+, eAAC+, MP3, WMA, 3GP, MP4, and M4A. Launching Music allows you to navigate through your music library, play songs, and create playlists (music files bigger than 300 KB are displayed).

Playing Music:

1. Tap Apps icon → Music icon.

2. Tap a library category at the top of the screen (Songs, Playlists, Albums, Artists, Music square, or Folders) to view the available music files.

3. Scroll through the list of songs and tap an entry to begin playback.

4. The following Music controls are available:

Pause icon (II): Pause the song.

Play icon: Start the song after pausing.

Previous/Rewind icon (K): Press and hold to rewind the song. Tap to go to previous song.

Next/Fast-forward icon (K): Press and hold to fast-forward the song. Tap to go to next song.

Volume/SoundAlive icon: Volume control and SoundAlive.

Mute icon: Volume control showing volume muted.

Repeat All icon (A with arrows): Plays the entire song list once.

Repeat Current icon (A with 1): Replays the current list when the list ends.

Repeat Song icon: Repeats the currently playing song.

Shuffle icon: Shuffles the current list of songs randomly.

Play in Order icon: Songs play in order and are not shuffled.

Playlist icon: Lists the current playlist songs.

Add to Playlist icon: Create a new playlist.

Favorite icon (Star): Assign the current song as a Favorite.

Samsung Link icon: Streams the current music file to another device via Samsung Link.

To access additional options, follow these steps:

1. While in Music, press Menu icon.

2. The follow options are available before you play music:

Note: The following options may or may not appear depending on whether or not music is actually playing. Also, options will be different if the song you are listening to is in a playlist.

• Listen via Bluetooth: scans for devices and pairs with a Bluetooth headset.

• Set as: allows you to set the music file as a ringtone or alarm tone.

• Settings: allows you to change your Music settings.

• Details: displays details about the music file such as Title, Artist, etc.

The Music Settings menu allows you to set preferences for the Music app such as whether you want the music to play in the background, sound effects, and how the music menu displays.

1. From the Home screen, tap Apps icon → Music icon.

2. Press Menu icon → Settings.

3. Select one of the following settings:

• Tabs: this menu allows you to select which categories you want to display. Choices are: Albums, Artists, Genres, Music square, Folders, Composers, Years, Most played, Recently played, or Recently added. Tap each item that you want to display in the Music menu.

• Playlists: this menu allows you to determine which playlists are displayed.

• SoundAlive: set a type of equalization such as Normal, Pop, Rock, Jazz, Dance, Classic, etc.

• Adapt Sound: allows you to set Adapt Sound on when your are listening with earphones to alert of incoming calls and notifications.

• Play speed: set the play speed anywhere between 0.5X and 2.0X using the slider.

• Music auto off: when activated, music will automatically turn off after a set interval.

• Lyrics: when activated, displays lyrics when available.

• Smart volume: automatically adjusts each track’s volume to an equal level.

Playlists are used to assign songs to a list of preferred media which can then be grouped into a list for later playback. These Playlists can be created via either the handset’s Music options menu or from within a 3rd party music application (such as Windows Media Player) and then downloaded to the handset.

1. From the Home screen, tap Apps icon → Music icon.

2. Tap the Playlists tab.

3. Press Menu icon → Create playlist.

4. Type a name for this playlist in the field and tap OK.

To add files to the playlist:

1. From the Home screen, tap Apps icon → Music icon.

2. Tap the Playlists tab.

3. Tap the playlist name in which to add music.

4. Tap + icon to add music.

5. Tap a music file, or tap Select all to add all the music tracks to this playlist then tap Done.

To remove music files from a playlist:

1. From the Home screen, tap Apps icon → Music icon.

2. Tap the Playlists tab.

3. Tap the playlist name in which to delete music.

4. Press Menu icon → Remove.

5. Tap the checkbox to the left of each track you want to remove from this playlist, or tap Select all to remove all the music tracks from this playlist, then tap Remove.

Besides adding and removing music files in a playlist, you can also rename the playlist.

To edit a playlist:

1. From the Home screen, tap Apps icon → Music icon.

2. Tap Playlists.

3. Press Menu icon → Edit title.

4. Tap a playlist name to edit.

5. Enter a new name for the playlist then tap OK.

My Files allows you to manage your sounds, images, videos, bluetooth files, Android files, and other memory card data in one convenient location.

1. From the Home screen, tap Apps icon → My Files icon.

2. Tap Device storage to see the contents of your internal SD card.

Note: If you do not have an external SD card inserted, this option will not display. All files shown will be from your internal storage.

Note: Different folders may appear depending on how your phone is configured.

3. If you have an external SD card inserted, tap SD memory card to see the contents of your external SD card (memory card).

The myAT&T application allows you to manage your own AT&T account. You can review and pay your bill, check minutes and data usage, upgrade to a new device, or change your rate plan.

1. From the Home screen, tap Apps icon → myAT&T icon. The myAT&T page is displayed.

2. Read the Terms and Conditions and tap Accept to continue.

3. Enter your User ID and Password using the onscreen keypad, then tap Login.

4. Follow the on-screen instructions.

The Phone application allows you to access the dialer keypad, call logs, and favorites.

This application (also known as Google Photos) provide a means for automatically backing up your photos and videos to a centralized Google cloud location.

1. From the Home screen, tap Apps icon → Photos icon.

2. If prompted, tap Sign in to complete the registration process, or tap Not now to continue using the product without registration.

3. Follow the on-screen prompts to configure a connection method and other related parameters.

With Google Play Books, you can find more than 3 million free e-books and hundreds of thousands more to buy in the eBookstore.

1. From the Home screen, tap Apps icon → Play Books icon.

2. Log on to your Google account.

3. Follow the on-screen instructions for using the Play Books application.

This application takes you directly to the Play Store Games area where you can download games.

1. From the Home screen, tap Apps icon → Play Games icon.

2. Log on to your Google account if you have not already done so.

3. Select an available on-screen option and follow the on-screen instructions.

With Google Play Movies & TV, you can rent thousands of different movies and television shows. You can watch instantly, or download your movie or show for offline viewing at a later time.

1. From the Home screen, tap Apps icon → Play Movies & TV icon.

2. Log on to your Google account if you have not already done so.

3. Following the on-screen instructions for renting and viewing movies and TV shows.

4. Press Menu icon for additional options.

With Google Play Music, you can play music that you have added to your music file as well as any music you copied from your PC. While offline, you can listen to music you have copied from your PC.

1. From the Home screen, tap Apps icon → Play Music icon.

2. Log on to your Google account if you have not already done so.

3. At the Google play screen, tap Add account if you have not previously used Play Music, and follow the on-screen instructions to create your account and use Play Music.

With Google Play Newsstand, you can subscribe to your favorite magazines and have them available to read on your phone at any time or any place.

1. From the Home screen, tap Apps icon → Play Newsstand icon.

2. Log on to your Google account if you have not already done so.

3. Sweep the screen to the left or right to view various categories.

4. Tap a magazine to see more information and subscribe.

5. Follow the on-screen instructions to subscribe to a magazine.

Play Store provides access to downloadable applications and games to install on your phone. Play Store also allows you to provide feedback and comments about an application, or flag an application that might be incompatible with your phone.

Before using the Play Store you must have a Google Account.

1. From the main Home screen, tap Play Store icon.

2. Sign in to your Google account.

3. The first time you sign in, the Play Store Terms of Service will be displayed. Tap Accept to continue or Decline to exit.

4. Tap Apps, Games, or AT&T to download or purchase games or applications. You can also download updates to existing applications.

5. Follow on the on-screen instructions.

POLARIS® Office Mobile for Android is a Microsoft Office compatible office suite. This application provides a central place for managing your documents online or offline. The application can also open Adobe PDF (Portable Document Format) files.

1. From the Home screen, tap Apps icon → POLARIS Office 5 icon.

2. Enter your Email information (if desired) and touch Register to complete the process. – or – Touch Skip to ignore this registration. The main POLARIS Office 5 screen displays.

3. Follow the on-screen instructions to use POLARIS Office 5.

S Health is a wellness application that allows you to better manage your health by providing you with relevant information.

1. From the Home screen, tap Apps icon → S Health icon.

2. Read the introduction and tap Next.

3. Read the Use of S Health, Connecting Third Party Devices and Programs, Information Used, Proprietary Rights and Licences, and Disclaimer of Warranty.

4. Tap the I agree checkbox.

5. Tap Next.

6. Sign in to your Samsung account if you have not already done so.

7. Follow the on-screen instructions to use S Health.

This app can be used to monitor your exercise. While moderate physical activity, such as brisk walking, is safe for most people, health experts suggest that you talk with your doctor before you start an exercise program, particularly if you have any of the following conditions:

• Heart disease;

• Asthma or lung disease;

• Diabetes, or liver or kidney disease;

• Arthritis.

You should also check with your doctor if you have symptoms suggestive of heart, lung, or other serious disease, such as:

• Pain or discomfort in your chest, neck, jaw, or arms during physical activity;

• Dizziness or loss of consciousness;

• Shortness of breath with mild exertion or at rest, or when lying down or going to bed;

• Ankle swelling, especially at night;

• A heart murmur or a rapid or pronounced heartbeat;

• Muscle pain when walking upstairs or up a hill that goes away when you rest.

Finally, the American College of Sports Medicine recommends that you see your doctor before engaging in vigorous exercise if two or more of the following apply:

• You are a man older than age 45 or a woman older than age 55;

• You have a family history of heart disease before age 55;

• You smoke or quit smoking in the past six months;

• You have not exercised for three months or more;

• You are overweight or obese;

• You have high blood pressure or high cholesterol;

• You have impaired glucose tolerance, also called pre-diabetes.

When in Doubt – Check it Out: If you are unsure of your health status, have several health problems, or are pregnant, you should speak with your doctor before starting a new exercise program. Working with your doctor ahead of time is a good way to plan an exercise program that is right and safe for you. Consider it the first step on your path to physical fitness.

With the S Voice application you can use your voice to perform operations that you would normally have to do by hand such as dialing a phone number, texting a message, playing music, etc.

1. From the Home screen, tap Apps icon → S Voice icon.

2. Read the information on the Welcome screen, then tap Next.

3. Tap Tutorial to view a short tutorial on using S Voice – or – Tap Start S Voice to begin.

4. At the S Voice screen, tap the microphone icon or say “Hi Galaxy” to wake up S voice.

5. Speak into the phone and follow the on-screen instructions.

6. Press Menu icon for additional options.

With Samsung Apps, you can download hundred of applications from a variety of categories.

1. Sign on to your Samsung account if you have not already done so.

2. From the Home screen, tap Apps icon → Samsung Apps icon.

3. Tap an application that you would like, then tap Free or Price (depending on whether it is free or not).

4. Tap Accept and download. The application is downloaded to your device. You can find the app icon in your app menu.

5. Press Menu icon → Help for additional information.

This widget navigates to the sound and phone settings for your phone. It includes such settings as: display, security, memory, and any extra settings associated with your phone.

Important! Before initiating use, verify you have an active Internet connection available (either mobile network or Wi-Fi connection).

Note: Before beginning your initial Smart Remote application setup, confirm your TV is turned off.

1. Sign into your Samsung account.

2. From the Home screen, tap Apps icon → Smart Remote icon.

Note: If you are not connected to an active Wi-Fi, you may be prompted to continue the set up process via a mobile network. Click Connect to proceed.

3. Select your desired country or region for your TV Guide’s source listing.

4. Enter your current zip code and tap Done. This zip code must correspond to the location of your desired TV and set top box.

5. From the Find your TV service screen, select a service provider from the available channel listing.

6. From the Personalize screen, you can either follow the on-screen prompts to personalize your desired content or tap Skip to continue without customizing your content.

7. Read the on-screen Peel Disclaimer agreement and tap Agree to complete the set up process.

1. From the top of the main screen, tap Remote Control icon → Continue.

2. From the Select your TV brand screen, tap your TV’s manufacturer name.

• If you have a brand of TV not listed or you are using a projector, select from one of the following two options. Choose from either Show other brands or I have a home projector.

3. Aim your device at the TV and tap Power icon to confirm the set up process completed successfully and the correct TV IR codes were selected.

Note: The process of the initial TV activation can take up to 10 seconds. Please do not press the button again.

4. If the TV turned on, tap Yes, this code 1 works. – or – If the TV did not turn on after tapping Power icon and waiting 10 seconds, tap No, test next code 2 or Send this code 1 again.

5. From the Select your channel source screen, select the entry that corresponds to your current channel control method:

• Set-top Box: selected when changing channels is done via a receiver box. Channels are not changed via the TV remote but rather through the receiver/box.

• My xxx TV: selected when a signal is fed directly into the TV and no box is used. Channels are changed directly on the TV by using the TV remote and not a box’s remote.

Note: Try matching your current channel selection method.

6. Select the Satellite Box Brand from the available list. For example, DirectTV®.

• If your brand does not appear in the list, tap Show other brands and follow the on-screen instructions.

Important! You must configure your set top box for IR communication with your device. If you do not select More info below and follow the on-screen instructions you may not be able to properly use the application.

7. When prompted to Enable IR, tap More info to learn how to configure your set top box to receive and respond to IR controls.

8. Only after completing the IR setup process and programming your box, press Back icon.

Note: This IR programming of your set top box is a one-time process and once successful should not need to be repeated.

9. If prompted to personalize your experience, follow the on-screen instructions.

To change channels:

1. Sign into your Samsung account.

2. From the Home screen, tap Apps icon → Smart Remote icon.

3. From the top of the main screen, tap Remote Control icon. This launches an on-screen remote control.

• Easy remote: provides the most common used control features. Scroll down to view additional functions.

4. In a single motion touch and drag up from the bottom-right of the screen to access additional remote tabs. Choose from one of the following:

• TV: provides access to control functions specific to your TV.

• [Set top box]: displays customized control specific to your configured set top box. Ex: satellite dish remote control functions.

5. From the remote screen press Menu icon and then tap Change room icon to choose from different receivers/boxes in different rooms. Ex: Living Room box, Bedroom box, etc.

6. Press Back icon to return to the main menu.

1. Sign into your Samsung account.

2. From the main Smart Remote screen, tap Combined View icon to reveal available media categories.

3. Select an available category. – or – Tap Channel Guide to display on your TV an on-screen listing of available set top box shows.

From the main Smart Remote screen, press Menu icon and then select an available on-screen option:

• Change room: allows you to select a previously configured room.

• Edit channels: allows you to add or remove channels from your custom list. Press and hold a channel number to update the channel entry.

• Settings: provides access to the Samsung Smart Remote settings menu.

• About: displays on-screen information about the application.

You can personalize your application to do things such as show content only from your selected media categories, or add an additional room’s set top box.