KOGAN ACTIVE 4 SE KAA4SESWNAA (01) PDF Document

According to the user guide, water resistance is not permanent and may be reduced by time and wear. To avoid damage caused by liquid immersion, which is not covered by the warranty, you should avoid the following conditions:

• Pressing buttons or performing functions underwater.

• Cleaning the device with an ultrasonic cleaner or weak alkaline and weak acidic detergent.

• Dropping the product from a height or subjecting it to other shocks.

• Disassembling or repairing the product through an unofficial authorised agency.

• The product coming into contact with alkaline substances, such as soap or suds in the shower or bath.

• The product coming into contact with perfumes, solvents, detergents, acids or acidic substances, insecticides, lotions, sunscreens, moisturising oils or hair dyes.

• Charging the product in a wet state.

• Dust and water resistance is only for the watch body; other parts like the strap and charging cable are not included.

Follow these steps to set up your smart watch:

1. Charge the watch to activate and turn it on before first use. Connect the magnetic charging cable to the charging contacts on the back of the watch.

2. Search for ‘very fit’ on the App Store or Google Play, or scan the QR code in the user guide to download and install the app.

3. Log in to the app and set your personal information, as well as your step and weight goals.

4. On the Device interface in the app, tap the ‘+’ icon in the upper right corner. Your phone will start searching for devices. From the list of found devices, choose your smart watch name to pair. You can also link the device by scanning the watch’s QR code using the scan function in the app.

1. If the watch is off, it will automatically turn on when you put it on charge. Attach the supplied magnetic charging cable to the magnetic charging contacts located on the back of the smart watch.

2. Attach the other end of the cable to a USB power adapter (not supplied). Ensure the adapter meets the specified voltage and current of 5V/500mA.

Ensure that your watch is positioned at least one finger above your wrist bone and that the heart rate sensor on the back of the watch is touching your skin.

Screen Operation:

The smart watch has a full touch screen that supports operations like short tap, swipe left/right, and swipe up/down.

Button Operation:

The physical button supports “short press” and “long press” operations.

• Short press: Returns to the home page or pauses an exercise.

• Long press: Press and hold for 2 seconds to turn on the watch when it is off.

Health Tracking:

1. The watch automatically records your daily data.

2. You can manually measure your heart rate, blood oxygen, and stress level on the watch. Alternatively, you can enable automatic, continuous monitoring for these metrics and sleep tracking within the VeryFit app.

Starting an Exercise:

1. From the main watch face, short press the physical button to open the application list.

2. Tap the Workout icon to see the different exercise types.

3. Tap the icon for the exercise you want to start (e.g., Outdoor Running).

The watch can display up to 20 exercise types by default. You can add, delete, or reorder these exercise types from a list of 100 in the VeryFit app’s “Multi exercise mode” settings.

The watch comes with 3 default watch faces. You can switch between them manually on the watch or through the VeryFit app’s watch face settings. You can also customise the watch face via the app. For more options, you can download additional watch faces from the “Watch Face Market” in the app.

• Exercise Types: The watch can display up to 20 exercise types by default, including Outdoor run, Indoor run, Outdoor Walk, Hiking, Cricket, Pool swim, Yoga, Rower, Elliptical, HIIT, and more. You can add or delete exercise types from a total of 100 available choices in the VeryFit app.

• Intelligent Recognition: The watch supports intelligent exercise recognition, meaning it can automatically detect if you are running or walking. It can also automatically pause an exercise or remind you when an exercise ends. This feature can be toggled on or off in the app.

• Exercise Summary: The watch provides a summary of various exercise data, which can be viewed in detail on the VeryFit app.

• Exercise Records: You can view your recent exercise records and detailed data directly on the watch, as well as in the app.

The phone application on your watch allows you to perform several actions:

1. Frequent Contacts: You can add up to 20 frequent contacts to your watch through the VeryFit app. You can then call these contacts directly from the watch.

2. Call History: You can view your recent call history on the watch and call the numbers displayed in the history.

3. Dialler: You can make calls by dialling numbers directly using the watch’s dialpad.

For both heart rate and blood oxygen measurements, you can perform a manual check on the watch. You can also enable automatic around-the-clock monitoring for both metrics in the VeryFit app settings.

During any manual measurement, it is important to keep your arm and wrist still and wait patiently until the measurement is complete for an accurate reading.

Stress:

1. You can manually measure your stress level on the watch. For accurate results, keep your arm and wrist still during the measurement.

2. The watch also supports automatic all-day stress monitoring, which can be enabled or disabled in the VeryFit app settings.

Breathe:

1. Access the Breathe training feature by tapping its icon. You can choose the duration for the exercise.

2. Click Start to begin the breathing animation. Follow the vibration and animation cues to adjust your breathing. This exercise can help soothe your emotions.

Stopwatch:

Use the watch as a stopwatch. It includes a “Lap” function to record lap times.

Alarm:

1. You can add, delete, or turn alarms on/off directly on the watch. You can also manage alarms for the watch via the VeryFit app.

2. In the app, you can set the alarm delay time and the number of times you want the alarm to repeat after being delayed.

Timer:

You can set a timer for a preset duration on the watch. The timer will remind you with an alert when it expires. You can also customise the timer duration.

Weather:

The watch can display a three-day weather forecast for your current city, including the current weather, and the highest and lowest temperatures for today and the next two days. This feature requires the watch to be connected to the VeryFit app with weather notifications enabled.

Music Control:

1. When the watch is connected to the VeryFit app, you can control your phone’s music player. Functions include “next,” “previous,” “play/pause,” and “volume increase/decrease.”

2. This function can be enabled or disabled in the app settings.

Find Phone:

1. When the watch is connected to the app, you can use this feature to make your phone ring.

2. Click the icon on the watch screen to end the ringing.

3. This function can be enabled or disabled in the app settings.

Cycle Tracking:

After enabling and setting up Cycle Tracking in the VeryFit app, the watch will display cycle tracking information. You can set the cycle length, reminder time, and other options in the app, and the watch will provide periodic reminders.

Camera Control:

When the watch is connected to the VeryFit app, you can use it as a remote to control your phone’s camera for taking photos. Make sure the watch is connected and your phone’s camera is turned on.

In the watch’s settings menu, you can:

1. Set the screen-on time, ringtone volume, and vibration settings.

2. Shut down, restart, or reset the watch. Note that resetting the watch will clear all stored data and unpair it from your phone.

The settings menu includes options for Watch Faces, Display, Sounds and Vibration, DND Mode, Battery Level, General, About, and Help.

The Control Centre provides quick access to toggle various functions. You can use it to turn on Do Not Disturb, enable Raise to Wake, adjust screen brightness, use the find my phone feature, and turn your watch screen into a flashlight.

The watch supports multiple reminder modes, including:

• Message reminder

• Incoming call reminder

• Walking reminder

• Drinking reminder

• Exercise goal reminder

• Exercise centre rate warning reminder