KOGAN ACTIVE 4 SE KAA4SESWBKA (01) PDF Document

Water resistance is not permanent and may be reduced by time of use and daily wear and tear. The following conditions may affect the waterproof performance of the KOGAN ACTIVE 4 SE KAA4SESWBKA and should be avoided to prevent damage by liquid immersion:

• Pressing buttons or performing functions underwater.

• Cleaning the device with an ultrasonic cleaner or weak alkaline and weak acidic detergent.

• The product is dropped from a height or subjected to other shocks.

• The product is disassembled or repaired through an unofficial authorised agency.

• The product comes into contact with alkaline substances, such as soap or suds in the shower or bath.

• The product comes into contact with perfumes, solvents, detergents, acids or acidic substances, insecticides, lotions, sunscreens, moisturising oils or hair dyes.

• Charging the product in a wet state.

• Dust and water resistance is only for the watch body; other parts such as the strap and charging cable are not included.

The components included are:

• Smart Watch

• Charging Cable

• User Guide

The main components of the KOGAN ACTIVE 4 SE KAA4SESWBKA are:

• Button

• Charging Contacts

• Heart Rate Sensor

• Speaker

• Microphone

Follow these steps to set up your KOGAN ACTIVE 4 SE KAA4SESWBKA:

Step 1. Charge the watch to activate and turn it on before first use. To charge, connect the magnetic charging cable to the charging contacts on the back of the watch.

Step 2. Search for ‘very fit’ on the App Store or Google Play, or scan the QR code in the user guide to download and install the app.

Step 3. Log in to the app and set your personal information, including your step and weight goals.

Step 4. Start the ‘very fit’ app, enable the Bluetooth feature, and grant GPS positioning permission.

Step 5. Light up the watch screen and bring it close to your phone.

Step 6. On the Device interface in the app, tap the ‘+’ icon in the upper right corner. Your phone will start searching for devices.

Step 7. From the device list, choose your smart watch name to pair. You can also link the device by scanning the device’s QR code using the scan function.

Step 8. Confirm the binding request on the smart watch.

Step 9. Fill in your information and set your step goal on the App to complete the binding.

Step 1. If the watch is off, it will automatically turn on when you place it on the charger. To charge, attach the supplied magnetic charging cable to the magnetic charging contacts on the back of the smart watch.

Step 2. Attach the opposite end of the cable to a USB power adapter (not supplied). Ensure the adapter meets the specified voltage and current of 5V/500mA.

To ensure accurate readings from the KOGAN ACTIVE 4 SE KAA4SESWBKA, wear the watch at least one finger above your wrist bone and make sure the sensor on the back of the watch is touching your skin.

Screen Operation:

The KOGAN ACTIVE 4 SE KAA4SESWBKA has a full touch screen that supports operations including short tap, swipe left/right, and swipe up/down.

Button Operation:

The watch has a physical button with “short press” and “long press” functions:

• Press to return to the home page or pause an exercise.

• Press and hold for 2 seconds to turn on the watch when it is off.

Health Tracking:

Step 1. The watch automatically records your data.

Step 2. You can manually measure your heart rate, blood oxygen, and stress level directly on the watch. For continuous tracking, you can turn on automatic measurement of heart rate, blood oxygen, stress level, and sleep in the app to monitor these metrics throughout the day.

Starting an Exercise:

Step 1. When the watch face is displayed, short press the physical button to access the application list.

Step 2. Tap the Workout icon to see the different exercise types.

Step 3. Tap the icon of an exercise (e.g., Outdoor Running) to start the exercise.

The watch can display up to 20 exercise types by default. In the app’s Multi exercise mode, you can add or delete the exercise types displayed on the watch or change their order.

The KOGAN ACTIVE 4 SE KAA4SESWBKA comes with 3 watch faces by default. You can switch between them manually on the watch or through the ‘very fit’ app’s watch face settings. You can also customise the watch face in the app. More watch faces are available for download from the “Watch Face Market” within the app.

Up to 20 exercise types can be displayed by default on the KOGAN ACTIVE 4 SE KAA4SESWBKA, including: Outdoor run, Indoor run, Outdoor Walk, Indoor Walk, Hiking, Outdoor cycle, Indoor cycle, Cricket, Pool swim, Open water swim, Yoga, Rower, Dance, Elliptical, Workout, HIIT, Functional strength training, Core training, Pilates, and Cooldown. You can add, delete, or reorder the exercise types displayed on the watch via the ‘very fit’ app. There is a total of 100 exercise types to choose from in the app.

The KOGAN ACTIVE 4 SE KAA4SESWBKA supports intelligent exercise recognition, which can automatically detect if the user is running or walking. It also supports automatically pausing an exercise or providing a reminder when an exercise ends. This feature can be turned on or off in the ‘very fit’ app.

By short pressing the physical button from the watch face, you can access the application list. The applications are: Activity, Phone, Workout Records, Heart Rate, Blood oxygen, Stress, Sleep, Breathe, Clock (Alarm, Stopwatch, Timer), Weather, Cycle Tracking, Music, Camera Control, Find phone, and Settings.

The phone feature on your KOGAN ACTIVE 4 SE KAA4SESWBKA allows you to:

Step 1. Add up to 20 frequent contacts to your watch through the ‘very fit’ app. You can then call these contacts directly from your watch.

Step 2. View your recent call history on the watch and call the numbers displayed in the call history.

Step 3. Make calls using the watch’s dialler.

For all measurements (Heart Rate, Blood Oxygen, and Stress), you can manually start a measurement on the watch. Additionally, you can enable automatic around-the-clock monitoring for these metrics in the ‘very fit’ app settings.

During each measurement, it is important to keep your arm and wrist still and wait patiently until the measurement is complete for an accurate reading.

Step 1. Select the Breath training icon on your KOGAN ACTIVE 4 SE KAA4SESWBKA to access the feature. You can choose the duration for the session.

Step 2. Tap Start to begin the breath training animation. Follow the vibration and animation frequency to adjust your breathing. This can help soothe your emotions.

Stopwatch:

Use the watch as a stopwatch. The stopwatch also includes a “Lap” function to record lap times.

Alarm:

You can add, delete, or turn an alarm on/off directly on the watch. You can also set an alarm for the watch via the app. In the app, you can set the alarm delay time and the number of times to delay.

Timer:

You can set a timer with a preset duration on the watch. The timer will remind you when the time expires. You can also customise the timer time.

Weather:

The watch supports a three-day weather view for the current city. You can see today’s current weather, highest and lowest values, and the highest and lowest values for the next two days. You must connect to the ‘very fit’ app to enable the weather notification feature.

Music Control:

When the watch is connected to the app, you can control your phone’s music player. Functions include “next,” “previous,” “play/pause,” and “volume increase/decrease.” This function can be enabled or disabled in the app settings.

Find Phone:

When the watch is connected to the app, you can use the Find Phone feature to make your phone ring. Click the icon on the watch to end the ringing. This function can be enabled or disabled in the app settings.

Cycle Tracking:

After opening Cycle Tracking in the ‘very fit’ app, the KOGAN ACTIVE 4 SE KAA4SESWBKA will display cycle tracking function options. You can set the cycle length, reminder time, and other options, and the watch will provide periodic reminders.

Camera Control:

When the watch is connected to the app, you can manually turn on your phone’s system camera and use the watch to control taking photos.

In the watch’s settings, you can adjust:

• Screen-on time

• Ringtone volume

• Vibration

• Watch Faces

• Display

• Sounds and Vibration

• DND Mode

You can also view Battery Level, General info, About, and Help. Additionally, you can shut down, restart, or reset the watch. Once reset, all data stored in the watch will be cleared and the watch will be unpaired from your phone.

Reminder Module:

The KOGAN ACTIVE 4 SE KAA4SESWBKA supports multiple reminder modes, including message reminder, incoming call reminder, walking reminder, drinking reminder, exercise goal reminder, and exercise centre rate warning reminder.

Control Centre:

The Control Centre provides an easy way to access functions such as Do Not Disturb, raise to Wake, set the screen brightness, find my phone, and turn your watch into a flashlight.