Free English SANDBERG ACTIVE 420-35B (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SANDBERG ACTIVE 420-35B (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How can I charge the SANDBERG ACTIVE 420-35B power bank?
You can charge your SANDBERG ACTIVE 420-35B power bank in the following ways:
Via USB-C charger: Connect a USB-C charger to the USB-C port on the power bank.
Via USB AC charger: Connect a USB AC charger to the power bank using a USB-A to USB-C cable.
Via Solar Power: Place the power bank in direct sunlight. A green LED light indicates that the solar panel is active and charging.
How long does it take to charge the SANDBERG ACTIVE 420-35B?
The charging time for the SANDBERG ACTIVE 420-35B varies depending on the charging method used. Please refer to the table below for approximate charging times.
| Battery mAh | Battery Watt-hours | Solar panel Watt | Charging time by sun | Charging time by USB 1A | Charging time by USB 2.4A | Charging time by USB C 18W |
|---|---|---|---|---|---|---|
| 16000 | 59.2 Wh | 1.4W | 51 hours | 13 hours | 5 hours | 4 hours |
How do I check the battery level of the SANDBERG ACTIVE 420-35B?
The SANDBERG ACTIVE 420-35B is equipped with four blue LED indicators that display the remaining battery capacity:
1 LED: 25%
2 LEDs: 50%
3 LEDs: 75%
4 LEDs: 100%
How can I charge other devices using the SANDBERG ACTIVE 420-35B?
You can charge your devices with the SANDBERG ACTIVE 420-35B using its different ports:
Using USB-A: You can charge one smartphone and one tablet, or two smartphones simultaneously.
Using USB-C: You can charge one smartphone or one tablet.
How do I operate the flashlight on the SANDBERG ACTIVE 420-35B?
To use the flashlight feature on your SANDBERG ACTIVE 420-35B, follow this procedure:
1. Press the power button once to turn the flashlight on to 100% brightness.
2. Press the button again to reduce the brightness to 25%.
3. Press the button once more to activate the strobe mode.
4. Press the button again to turn off the LED light.
5. To activate the SOS mode, hold the power button for about 3 seconds.
What are the technical specifications of the SANDBERG ACTIVE 420-35B?
| Capacity: | 16000 mAh |
| USB-C Input: | 5V/3A, 9V/2A PD18W |
| USB-C Output: | 5V/3A, 9V/2.2A, 12V/1.67A PD20W |
| USB-A Output: | 5V/3A, 9V/2A, 12V/1.5A, SSCP 10V/2.25A, 22.5W |
| Solar panel: | 1.4 W / 280 mA |
| Product weight: | 356g |
How should I maintain the battery of my SANDBERG ACTIVE 420-35B for optimal performance?
For optimal battery performance of your SANDBERG ACTIVE 420-35B, it is recommended to fully discharge and then recharge the power bank at least once every three months.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD SANDBERG ACTIVE 420-35B (01) PDF DOCUMENT