LASERPECKER LX1 (01) PDF MANUAL

Technical support for this product is available globally. Please contact LaserPecker if you encounter any problems with your LX1 & LX1 Max.

Email: support@laserpecker.com

Tel: +86 0755-28913864

You can also join the LaserPecker LX1 VIP Group (QR code provided in the manual).

The LaserPecker APP software can be downloaded from Google Play or the App Store. After installing the APP, please read all warnings and instructions carefully to ensure safety and correct operation.

Download the Windows/Mac software (LaserPecker Design Space) from the Official LaserPecker website: http://www.laserpecker.net

Download the LightBurn software from the official LightBurn website: lightburnsoftware.com

When using a LaserPecker product, you should:

• Install, carry, store, operate, maintain and dispose of the product according to the manual and the provisions of relevant laws and regulations and safety standards.

• Ensure that the finished work does not breach the intellectual property rights of any third party or violate the provisions of relevant laws and regulations.

Given the conditions and methods of use of this product are beyond LaserPecker’s control, the consequences of any of the following circumstances shall be borne by the user and LaserPecker shall not be held responsible:

• Personal injury, property or product damage caused by improper operation, failure to follow instruction manual or other uncertainties.

• The work user created by LaserPecker products infringes the intellectual property rights of the third party or violates the relevant laws and regulations.

• Personal injury, property or product damage arising during installation, carry, storage, usage, maintenance and disposal of this product.

• All official LaserPecker materials have undergone safety testing and are compatible with this product. LaserPecker shall not be liable for material safety or engraving quality if used with non-LaserPecker official materials.

The LX1 & LX1 Max laser engraver and cutter offers superior 4-in-1 performance, allowing various creations by laser engraving, cutting, and drawing.

• The usage and specific application of this product, and emissions generated by engraving shall follow the laws and regulations of the user’s location.

• Please use and maintain the product in accordance with the manual instructions to ensure safe operation.

• This product is for indoor use only. Do not place in a rainy or damp environment.

• Please prepare a stable and flat table or workbench for this product.

• Minors of any age should not operate the product without adult supervision and assistance.

• Please concentrate and pay close attention to the operation process and changes in the surrounding environment during use.

• Do NOT operate the product when fatigued or under the influence of drugs, alcohol, or medication.

• When the product is in operation, please do NOT touch the moving parts, otherwise it may spoil your material.

• Do NOT leave the machine unattended during operation.

• Please cut off the power supply before switching to the laser module.

In case of the following situations, please stop using the product and cut off the power supply immediately:

• The product has a smell of burning odor.

• Engraved material generates a large amount of fumes or open flames.

• The internal components of the product have been damaged.

• The product stops working accidentally.

• The product generates unprecedented abnormal noise or light.

• Installation specification: Before operating LX1, please secure the main unit based on the user manual. Place the product on a stable and flat table or workbench. Vibration will affect engraving quality.

• Due to laser risks, do NOT bring minors or people without self-protection awareness close to the device in operation.

• Before operating the laser module, have adequate knowledge of laser radiation physics, hazard classification, health implications, and safety measures.

• The laser module uses Class 4 lasers. The overall laser becomes Class 1 when paired with a laser protection cover as required and used correctly.

• When operating the laser module, do NOT look directly at or touch the laser outlet, or expose your body to the laser.

• It is recommended to correctly install and use the official LaserPecker laser protection cover, which filters scattered laser light. When properly installed and powered, its opening/closing is linked to laser emission (stops when opened) for personal safety.

• Engraving/cutting materials may release toxic/harmful gases or smoke. Judge based on material composition and use the product with an air purifier or in a well-ventilated place.

• Reflective materials can cause laser reflection and injury. Remove all reflective materials from the work area before and during use. It’s recommended to blacken the engraving area on reflective material with a whiteboard marker beforehand.

• Power the device with the specified power and type (adapter with 24V 5A). Mismatched adapters cause malfunction.

• Before starting the laser, take safety measures: wear safety goggles (prevent eye/skin injury), remove irrelevant objects (prevent damage from laser irradiation), move away flammable/explosive objects (avoid fire).

• After starting the laser, do NOT move the device, as it may cease operation for self-protection or affect the engraving result due to displacement.

• Disconnect the connection cable between the protection cover and main unit, and separate them before moving either part.

• Do NOT scratch, bend, break the acrylic plate/profiles, or open the cover reversely, as it impairs protection and can cause permanent damage/injury.

• The cover top is a double-door structure. Do NOT place heavy objects over 5kg on top.

• Do not put objects or body parts near or into the exhaust fan during operation.

• Keep all wires away from exhaust fan blades to avoid damage.

• An LP Air Purifier can be connected to the exhaust fan to purify and filter air inside the cover.

Please take the following measures when there is open fire during engraving (LX1 can detect high temperature and cease operation at 50°C):

1. Cut off the power supply.

2. Douse the flames with a fire extinguisher.

Fumes and particulates generated during engraving/cutting can irritate the respiratory system. It is recommended to use the product with an air purifier or in a well-ventilated place. Wear a protective mask if necessary. If respiratory irritation or similar symptoms occur, immediately move the patient to a site with fresh air and seek medical help.

Label Description	Warning	Position
Hand near hot surface symbol	Be careful of hot surfaces. Do NOT touch the laser module while it’s working or when the machine has not yet cooled down after working.	On the back of the laser module
Hand being pinched symbol	Be careful of pinch point. Do NOT touch or block the moving parts when in operation.	On the X axis
Connector with cross symbol (DO NOT HOT-PLUG)	Do NOT unplug or plug the connection cable of laser and artist module with power on.	On the X axis
Flame symbol	Do NOT leave the machine unattended during operation. Be careful of fire.	On the laser module
Laser danger symbol (Class 4)	The laser class of laser product is Class 4. Please avoid eye or skin exposure to direct or scattered laser light.	On the laser module
Laser class 1 symbol (with cover details)	The laser class of laser product is Class 1 (when cover used correctly). Please avoid eye or skin exposure to direct or scattered laser light when the opening and closing of the protection cover are not linked to the laser emission.	On the top of the protection cover

To switch the module, remove or add accessories, please turn off the main unit before plugging and unplugging the connection cable of the laser module.

You can upgrade the firmware online by connecting the LaserPecker APP to your device via Bluetooth. An update prompt for new firmware will show up when connecting the machine. It is recommended to upgrade the firmware to the latest version timely. Detailed Steps:

1. Connect the LaserPecker APP to your machine.

2. A red notification dot will show up in the Settings page when a new firmware is available.

3. Enter the interface and click Upgrade.

Product Name	LaserPecker LX1& LX1 Max
Laser Class under LP Protection Cover	Class 1
Size	LX1 Max Unfolded: 578mm*558mm*196mm LX1 Max Frame Folded: 578mm*94.8mm*196mm LX1 Max Frame with Protection Cover: 647mm*632mm*315mm LX1 Unfolded: 578mm*558mm*196mm LX1 Frame Folded: 578mm*94.8mm*196mm LX1 Frame with Protection Cover: 647mm*632mm*315mm
Whole Unit Weight	LX1: 5kg / LX1 Max: 5.76kg
Working Area	LX1: 400*420mm (Artist Module: 400*400mm) LX1 MAX: 400*800mm (Artist Module: 400*780mm)
Material	Anodized Aluminum Alloy
File Format	G-code/JPG/PNG/BMP/SVG/DWG/DXF
Connection Mode	Bluetooth Connection; USB Connection (2375-2525MHz)
Operating Systems	Support iOS 9.0+, Android 6.0+, MacOS 10+, Windows 10+
APP & Software	LaserPecker Design Space (PC&APP), LightBurn
Power Input	DC (24V 5A) AC (100-240V 50-60HZ)
Working Temperature	0°C~50°C
Working Humidity	5%~80%
Safety Certification	IEC 60825, CE, ROHS, FCC, FDA, CDRH, NCC, KC, UKCA, TECLEC

Four Modules Settings:

Feature	10W 450nm Module	20W 450nm Module	2W 1064nm Module	Artist Module
Laser Type	450nm (Blue Laser)	450nm (Blue Laser)	1064nm (Infrared Laser)	\
Laser Output Power	10W	20W	2W	\
Module Weight	548g	618g	702g	436g
Laser Spot (Diameter)	0.08mm	0.08mm	0.03mm	0.3-5mm
Cutting Depth	8mm Plywood, 8mm Acrylic	15mm Plywood, 10mm Acrylic	\	\

The Standard Suit (Main unit + Single Laser Module) includes:

• Main Frame*1

• Laser Module*1

• AC Cord/ Power Adapter*1

• USB to Type-C cable 1.5m*1 / Type-C cable 0.6m*2

• Safety Goggles*1

• Key H2.0/H2.5/H3.0*1

• Material (Sample pack, likely wood/cardboard)

Optional Add-ons include:

• 10W 450nm Module

• 20W 450nm Module

• 2W 1064nm Module

• Artist Module

• Rotary Extension*1

• Riser*4 + Screws*8 + Key

• Engraving Bed & Cutting Plate (LX1)*1

• Laser Protection Cover (LX1)*1

• Engraving Bed & Cutting Plate (LX1 Max)*1

• Laser Protection Cover (LX1 Max)*1

Follow these steps for fast assembly:

1. Unbox the product.

2. Rotate the two frame legs 90 degrees outwards until they are perpendicular to the main beam.

3. Unscrew the screw lock located on the side of the Y-axis connection block (where the X-axis attaches).

4. Rotate the X-axis (the beam holding the module holder) 90 degrees upwards so it is parallel to the workbench surface, forming the gantry structure. Then, tighten the screw lock securely.

5. Unscrew the screw lock on the side of the laser module holder on the X-axis. Slide the laser module into the holder. Tighten the screw lock to secure the laser module.

Connect the cables as follows:

• Connect the power adapter cord to the main power interface on the frame leg.

• Connect the laser module cable to the laser module connection interface on the Y-axis connection block.

• Connect the Y-axis cable (if separate or during assembly) to the Y-axis connection interface.

• Use the accessory connection interface for accessories like the protection cover or rotary module.

• Connect the USB cable from your computer to the USB connection port on the frame leg for PC software control (or use Bluetooth).

The LED indicator lights signify the following statuses:

• Solid Blue: Bluetooth is connected.

• Blinking Blue: Bluetooth is disconnected.

• Solid Green: In preview mode (showing the frame).

• Multi Color: Data is transmitting.

• Streaming Light: Engraving is in progress.

• Blinking Yellow: Engraving stops (e.g., paused or finished).

• Alternative Flashing of Red and Green: Reset to factory settings is in progress.

• Alternative Flashing of Red and Blue: Firmware is being upgraded.

After assembling the device and powering it on, open the official application LaserPecker Design Space (LDS) on your mobile device. Follow the on-screen prompts within the app to search for and connect to the LaserPecker LX1 via Bluetooth.

After assembling the device and powering it on, open the official PC Software LaserPecker Design Space (LDS) or LightBurn. You can connect the device to the PC software via:

• USB cable: Connect the included USB cable between the LX1 and your computer.

• Bluetooth dongle: Use an official Bluetooth dongle (if required/available) to connect wirelessly.

The software should then detect and allow you to connect to the machine.

When engraving, put the ranging rod (the small flip-down lever on the laser module) to its lowest position. Adjust the height of the laser module (using software controls or manual Z-axis if applicable) until the bottom tip of the ranging rod just touches the surface of the material to be engraved.

When cutting, adjust the position (height) of the laser module according to the thickness of the material. Use the scale marked on the side of the laser module. Align the white solid indicator line with the number corresponding to the material thickness in millimeters.

Reference for thickness adjustment:

• If Material thickness is 18mm, adjust the scale so the white line aligns with ’18’.

• If Material thickness is 6mm, adjust the scale so the white line aligns with ‘6’.

Adjust accordingly for other thicknesses based on the scale provided (likely ranging from 2mm to 18mm).

• To insert or tighten the pen: Slide down the regulator/holder mechanism on the Artist Module.

• To remove or change the pen: Slide up the regulator/holder mechanism on the Artist Module.

*Please refer to in-APP calibration for more calibration after changing the pen.

Fill the back and bottom of the X axis with lubricant when the machine is stuck in operation or as part of regular maintenance. The grease fitting is located behind the X axis (likely on the linear rail or leadscrew block) and potentially at the bottom of the Y axis connection points. Move the laser head to the grease fitting location. Align it and apply two to three drops of lubricant. It is recommended to add lubricating oil once every 3 months.