HONOR MAGIC V5 MBH-N49 (01) PDF Document

To use full screen navigation gestures on your HONOR MAGIC V5 MBH-N49, first go to Settings > System & updates > System navigation and ensure ‘Gestures’ is selected. The basic gestures are:

Return to the previous screen: Swipe inward from the left or right edge of the screen.

Return to the home screen: Swipe up from the bottom edge of the screen.

Access multitasking screen: Swipe up from the bottom edge of the screen and hold.

Switch apps: Swipe along the bottom edge of the screen. Ensure ‘Slide across bottom to switch apps’ is turned on in System navigation. Alternatively, you can swipe in an arc along the bottom edge of the screen.

To enable knuckle gestures on your HONOR MAGIC V5 MBH-N49, go to Settings > Accessibility features > Shortcuts & gestures to enable Screenshot/Global Favorites and Record screen. The available gestures are:

Screenshot: Knock twice on the screen with a knuckle to take a screenshot.

Scrollshot: Knock and draw an “S” to take a scrolling screenshot.

Partial screenshot: Knock and draw an enclosed area to capture part of the screen.

Record screen: Knock twice on the screen with two knuckles to start or end a screen recording.

You can take a screenshot on your HONOR MAGIC V5 MBH-N49 using several methods:

Button Combination: Press the volume down button and the power button simultaneously.

Knuckle Gesture: Knock twice on the screen with one knuckle.

Three-finger Gesture: Swipe down with three fingers.

Shortcut Button: Swipe down from the top right of the screen to open the Control Center, then tap the Screenshot icon.

Power On: Press and hold the Power button for a few seconds until your device vibrates and displays the logo.

Power Off or Restart: Long press the Power and Volume up buttons until the Power off and Restart menus appear. Tap the corresponding menu option. To confirm power off, touch ‘Touch to power off’. To confirm restart, touch ‘Touch to restart’.

Forcefully Restart: If your phone is not working or turning off normally, press and hold the Volume down and Power buttons for more than 10 seconds to force a restart.

You can change the navigation mode on your HONOR MAGIC V5 MBH-N49 by going to Settings > System & updates > System navigation. From there, you can select from the following options:

Gestures:

• Return to parent menu: Swipe inward from the left or right edge.

• Return to home screen: Swipe up from the middle of the bottom edge.

• Access multitasking: Swipe up from the bottom edge and pause.

Three-key Navigation:

• Tap the back key to go to the previous page or quit an app.

• Tap the home key to return to the home screen.

• Tap the recent tasks key to enter the “Recent tasks” page.

Navigation dock:

• Enable Navigation dock in the System navigation settings.

• Touch the button to go back.

• Touch and hold, then release to go to the home screen.

• Touch and hold, then swipe left or right to view recent tasks.

You can use the Device Clone feature to move basic data like contacts, calendar, images, and videos to your new HONOR MAGIC V5 MBH-N49.

Migrate Data from another Android or iOS Device:

1. On your new HONOR MAGIC V5 MBH-N49, open the Device Clone app (or go to Settings > System & updates > Device Clone).

2. Touch ‘This is the new device’, then select the old device type.

3. Follow the onscreen instructions to download and install Device Clone on your old device.

4. On your old device, open the Device Clone app and touch ‘This is the old device’. Follow the instructions to connect the devices by scanning a code or connecting manually.

5. On your old device, select the data you want to clone and follow the instructions to start.

Download from iCloud:

1. On your HONOR MAGIC V5 MBH-N49, go to Device Clone, and tap This is the new device > Apple devices > Download from iCloud.

2. Log in to iCloud according to the on-screen instructions.

3. Select the data you want to download from iCloud and tap Transfer to complete the migration.

You can manage how your HONOR MAGIC V5 MBH-N49 locks and unlocks with the following settings:

Manually Lock the Screen:

• Press the power button.

• Pinch two fingers on the home screen, tap Cards, go to Classic widgets > Widgets, and add the Screen Lock tool to your home screen. Tap this tool to lock the screen.

Keep the Screen On While Looking: Go to Settings > Honor AI > Smart Sensing and confirm that ‘Keep screen on while looking’ is turned on.

Set the Screen Timeout Period: Go to Settings > Display & brightness > Sleep and select a screen timeout period.

Turn On the Screen:

• Press the Power button.

• Go to Settings > Accessibility features > Shortcuts & gestures > Screen On/Off, and enable ‘Raise to wake’ or ‘Double-tap to wake’.

Unlock the Screen:

• Password: Swipe up from the middle of the screen and enter your lock screen password.

• Face Unlock: Turn on the screen and align it with your face.

• Fingerprint Unlock: Touch the fingerprint icon on the screen with an enrolled finger.

On your dual-SIM HONOR MAGIC V5 MBH-N49, you can manage your SIM cards as follows:

Enable or Disable a SIM Card: Go to Settings > Mobile network > SIM management, and enable or disable a SIM as needed. A disabled SIM card cannot be used for calling, messaging, or accessing the Internet.

Name Your SIM Card: Go to Settings > Mobile network > SIM management, and touch the edit icon to change the SIM card name.

Set Default Mobile Data and Calling SIM: Go to Settings > Mobile network > SIM management and set SIM 1 or SIM 2 as the default for mobile data or calling.

Enable Call Forwarding Between SIMs: Go to Settings > Mobile network > SIM management > Call forwarding between SIMs. Select a call forwarding mode and turn on the switch. This feature requires carrier support.

Quickly Switch Default Mobile Data SIM:

1. Swipe down from the top right to open the Control Center and turn on Mobile data.

2. Touch the text under the Mobile data icon until a prompt is displayed, then select a SIM card and touch OK.

You can share your HONOR MAGIC V5 MBH-N49’s mobile data or Wi-Fi connection using several methods:

Share via Personal Hotspot:

1. Go to Settings > Mobile network > Personal hotspot, and enable Personal hotspot.

2. You can then set the Device name and Password for other devices to connect to.

Share via Bluetooth:

1. Go to Settings > Bluetooth, enable it, and pair with the other device.

2. On your phone, go to Settings > Mobile network > Personal hotspot > More, and enable Bluetooth tethering.

3. On the paired device’s Bluetooth settings, tap next to your phone’s name and enable Internet access.

Share via USB:

1. Connect your phone to a computer using a USB cable.

2. On your phone, go to Settings > Mobile network > Personal hotspot > More, and enable USB tethering.

You can customize the home screen of your HONOR MAGIC V5 MBH-N49 in various ways:

Add Service Cards: Pinch two fingers on the home screen to enter the edit screen, tap Cards, select an app like Gallery or Weather, choose a style, and tap ADD TO HOME SCREEN.

Create Big Folders: Press and hold a small folder and tap Enlarge. You can tap app icons directly within the large folder to open them.

Personalize Folder Icon Sizes: Long press a folder icon to enter edit mode, then drag any corner of the icon to change its size and shape.

Organize with the Bottom Navigation Bar (Global Taskbar):

1. Open Settings, search for Global Taskbar, and ensure it is enabled.

2. On the unfolded screen, swipe up and pause at the bottom edge of an app window to bring up the navigation bar. From here, you can quickly open apps, enter split-screen mode, or use floating windows.

To change the ringtone and vibration settings on your HONOR MAGIC V5 MBH-N49:

1. Go to Settings > Sounds & vibration and tap Phone ringtone or Notification tone.

2. You can then perform the following operations:

• Set a ringtone: Select a system ringtone, or tap Music on device to choose a local song. For a dual-SIM phone, you can set separate ringtones for SIM 1 and SIM 2.

• Set the vibration mode: Tap Vibration and select your desired mode. If you select ‘Synchronized (default)’, the vibration will match the ringtone’s rhythm. Other modes will have independent vibration patterns.

When charging your HONOR MAGIC V5 MBH-N49, please follow these precautions for safety and optimal performance:

• Always use the standard adapter and USB cable that came with your device. Using other chargers may cause repeated restarts, slow charging, or overheating.

• The phone performs a safety check when a charger is connected. If moisture is detected in the USB port, disconnect the phone and wait for the port to dry completely before charging again.

• Batteries have a limited number of charge cycles. If battery life becomes noticeably shorter, go to an authorized Honor Customer Service Center for a replacement.

• Do not cover your phone or charger while charging.

• If your phone heats up during extended use, stop charging, disable some features, and move it to a cool place.

• Do not use your phone while it is charging.

• If your phone doesn’t respond after pressing the Power button, the battery may be completely drained. Charge it for more than 30 minutes before trying again.

Your HONOR MAGIC V5 MBH-N49 can charge other devices (like phones, tablets, watches, and bands) that support the Wireless Charging Standard. Before you begin, ensure your phone’s battery level is higher than 20%.

1. Go to Settings > Battery, and enable Wireless reverse charging.

2. Power on the device you want to charge and place it on the center of the back of your HONOR MAGIC V5 MBH-N49. Do not place any metal objects between the two devices.

3. If charging does not start within 5 seconds, adjust the position of the device and try again.

4. If the device being charged is removed from your phone for more than 2 minutes, Wireless reverse charging will automatically be disabled.

Honor Connect on your HONOR MAGIC V5 MBH-N49 uses MagicRing technology to allow seamless collaboration between your Honor devices (phones, tablets, PCs) that are logged in with the same Honor ID. Key features include:

• Connected Apps: Seamlessly continue tasks from one device to another.

• Connected Call: Make or receive phone calls on your tablet or PC.

• Connected Notification: View and manage phone notifications on other devices.

• Connected Input: Use your PC’s mouse and keyboard to control your phone.

• Connected Camera: Use your phone’s camera on your PC.

• Tethering: Share your phone’s internet connection with one tap.

To set up Honor Connect:

1. Log in to the same Honor ID on all devices.

2. Toggle on Wi-Fi and Bluetooth on all devices.

3. On your phone, go to Settings > Honor Connect and agree to the user agreement to enable the services.

MagicRing on your HONOR MAGIC V5 MBH-N49 provides a central hub for controlling and transferring services and apps across your connected Honor devices.

Enter MagicRing page: Swipe down from the top right of the screen to open the Control Center and tap the MagicRing card.

Transfer services (e.g., screen sharing, network sharing):

1. On the MagicRing page, tap a device ball to see the services it provides.

2. Drag the service card to another device ball to transfer the service. If the target device ball is gray, it does not support that service transfer.

Transfer apps:

1. While in an app, swipe up with three fingers to enter the MagicRing page. A task card for the app will form.

2. Drag the task card to the target device to transfer the app. The transfer method (Connected Apps, Multi-Screen Collaboration, etc.) depends on the app and target device.

You can connect your HONOR MAGIC V5 MBH-N49 to an Honor PC for cross-device control, file sharing, and file editing. Ensure Wi-Fi, Bluetooth, and Honor PC Manager are open on the laptop, and NFC, Wi-Fi, and Bluetooth are enabled on your phone.

Connect using OneHop:

1. Touch the NFC area on the back of your phone to the Honor Share sensor or tag on the laptop.

2. Hold until you hear a beep or feel a vibration.

3. Follow the pop-up instructions on both devices to complete the connection.

Once connected, you can:

• Drag and drop files: Transfer pictures, videos, and documents between the phone window on your PC and the PC itself.

• Use Honor Share OneHop: Transfer files by tapping your phone to the PC’s sensor while viewing a picture or document.

• Record the PC screen: Shake your phone and tap it against the PC’s sensor to start a screen recording, which will be saved on your phone.

• Operate Phone Apps on your PC: Use your PC’s mouse and keyboard to open and interact with apps in the phone window.

• Answer calls on your PC: Answer voice and video calls from apps like WeChat directly on your PC.

You can project your HONOR MAGIC V5 MBH-N49’s screen wirelessly or with a wired connection.

Wireless Projection:

1. Ensure the large display (e.g., TV) supports Miracast/cast+ and its wireless projection is turned on. If not, connect a wireless HDMI adapter to it.

2. On your phone, swipe down to open the Control Center and turn on the wireless connection icon.

3. Swipe down again to show all shortcuts and enable Wireless Projection.

4. Your phone will search for available devices. In the device list, touch the name corresponding to the large display to connect.

Wired Projection (using a Type-C cable):

1. Prepare a compatible cable (e.g., Type-C to HDMI, Type-C to DP).

2. Connect the Type-C end to your phone and the other end to the large display.

3. On the external display, set the corresponding input (HDMI, DP, etc.) as the signal source.

Desktop Mode: Once projected, you can open the projection capsule on your phone, tap Projection mode, and select Desktop mode. This allows your phone and the larger display to work independently for multitasking.

The Hovering Mode on your foldable HONOR MAGIC V5 MBH-N49 allows you to bend the screen to a specific angle for stable shooting, similar to using a tripod.

Hovering Mode as a Tablet (Landscape):

1. Go to Camera and bend your screen in the landscape orientation. The view will automatically enter a split-screen mode.

2. Hold the phone or place it on a stable surface and adjust the angle for shooting.

3. During shooting, you can swipe on the other preview screen to view taken photos and tap the trash icon to delete them.

Hovering Mode as a Book (Portrait):

1. Go to Camera and bend your screen in the portrait orientation. The view will automatically enter a split-screen mode.

2. Hold the phone or place it on a stable surface and adjust the angle for shooting.

3. Unfold or close the screen to exit Hovering Mode.

The Pro mode on your HONOR MAGIC V5 MBH-N49 gives you full manual control over your camera settings.

1. Go to Camera and select the PRO mode.

2. You can then set the following parameters:

• Metering (M): Choose between Matrix (for landscapes), Center-weighted (for portraits), or Spot metering (for concentrating on a small area).

• ISO sensitivity (ISO): Tap ISO and drag the slider. Increase ISO in low light, and decrease it in bright light to avoid noise.

• Shutter speed (S): Tap S and drag the slider. Use a slower speed for stationary scenes and a faster speed for moving objects.

• Exposure compensation (EV): Tap EV and drag the slider to adjust brightness.

• Focus mode (AF): Tap AF and select AF-S (single focus for stationary scenes), AF-C (continuous focus for moving scenes), or MF (manual focus).

• White balance (WB): Tap WB and select a preset or tap the color temperature icon to adjust for a cooler or warmer tone.

• Storage format: You can choose to save photos in RAW format for more post-processing flexibility.

3. After adjusting the settings, tap the shutter button to shoot.

Air Scroll on your HONOR MAGIC V5 MBH-N49 allows you to scroll the screen using air gestures when your hands are occupied. To enable it, go to Settings > Honor AI > Air Gestures > Air scroll and enable the feature.

Air scroll down:

1. Close all five fingers together, hold your palm towards the front camera about 30-50cm away.

2. Wave your hand down when the hand icon appears on the screen.

Air scroll up:

1. Close all five fingers together, hold the back of your hand towards the front camera about 30-50cm away.

2. Wave your hand up when the hand icon appears on the screen.

To improve the success rate, keep your hand at the recommended distance, hold it straight up and not at an angle, and wave slowly and gently.

The multi-window features on your HONOR MAGIC V5 MBH-N49 make multitasking easier. Ensure the Multi-Window dock is enabled in Settings > Accessibility features > Multi-Window.

Floating Window:

• Open: Swipe inwards from either side of the screen and hold to open the Multi-Window dock, then tap an app to open it in a floating window.

• Adjust/Move: Slide the bottom corners to resize, or drag the bar at the top to move it.

• Minimize: Drag the top bar to the side of the screen to minimize it into an assistive ball.

• Close: Swipe up on the bar at the bottom of the floating window.

Split-Screen (Vertical or Horizontal):

• Activate: While in a full-screen app, swipe up from the bottom edge to the split-screen position icon and release. Then tap another app to open it in the other half of the screen.

• Adjust: Drag the app divider to adjust the window sizes.

• Switch: Tap the app divider to access options for swapping app positions or saving the app pair to your home screen.

• Exit: Slide the app divider to the edge of the screen.

You can manage contacts on your HONOR MAGIC V5 MBH-N49 by grouping them for easier communication.

Create a group:

1. Open the Contacts app and select the Groups tab.

2. Tap New, enter a group name (e.g., Family), and tap OK.

3. On the group screen, tap Add members, select the contacts to add, and tap Add.

Edit a group:

• On the Contacts interface, select Groups, and enter the group you want to edit.

• You can add or remove members, or tap More to set a group ringtone, rename, or delete the group.

Send group messages or emails:

• Open the desired group from the Groups tab.

• Tap the message icon to send a group message or the email icon to send a group email.

The Emergency SOS feature allows you to quickly and secretly send a message or make a call to your emergency contacts.

Set up Emergency SOS:

1. Go to Settings > Safety & emergency > Emergency SOS, and touch Emergency contacts to add an emergency contact.

2. Enable ‘Send SOS message automatically’ and ‘Make SOS call automatically’, and set the related permissions.

Activate Emergency SOS:

• In an emergency situation, press the Power button five times in quick succession.

• Your phone will automatically send a message with your current location to your emergency contacts. It will then call your emergency contacts one by one, play a pre-recorded SOS message, and then end the call automatically.

If ‘Make SOS call automatically’ is disabled, the emergency call screen will appear after the message is sent, allowing you to manually call an emergency service or contact.

The Notes app on your HONOR MAGIC V5 MBH-N49 includes several AI-powered features to enhance your note-taking.

AI Summary:

1. Open a note with at least 200 words.

2. Tap the edit icon, then open AI Notes.

3. Tap AI Summary to generate a summary of the note in a conversational format.

AI Minutes:

1. During a meeting, record an audio note.

2. After the meeting, open the note, tap the attachment icon, and open AI Notes.

3. Tap AI Minutes and select the type of meeting minutes you want to generate automatically.

AI Format:

1. Open a note you want to format.

2. Tap the edit icon, open AI Notes, and select AI Format.

3. Choose ‘Summarize and format’ or ‘Format original’ to improve readability based on the text content.

AI Correction:

1. Open a note you want to correct.

2. Tap the edit icon, open AI Notes, and select AI correction. The assistant will correct errors based on the current content to optimize quality and accuracy.

Parallel Space on your HONOR MAGIC V5 MBH-N49 creates a separate, secure space on your phone for apps and data, independent of the MainSpace.

Enable Parallel Space:

1. Go to Settings > Security & privacy > Device & data protection > Parallel Space and tap ENABLE.

2. Follow the instructions to set a password and password protection question to create the space. A shortcut will be added to your home screen.

Manage Apps and Files:

• Add Apps: Inside Parallel Space, tap Add apps to add apps from your MainSpace.

• Move Files: Use the ‘Move files in’ and ‘Move files out’ options within Parallel Space to migrate data like images, videos, and documents between the two spaces.

Run Apps Simultaneously in Dual Spaces:

1. Enter the Parallel Space homepage.

2. Swipe inwards from a long edge of the screen and pause until the Multi-Window dock appears. Drag the app onto the screen to enter split-screen mode.

3. Open another app in Parallel Space.

4. In the MainSpace on the other side of the screen, launch another app. You can now use apps from both spaces side-by-side.

You can manage your HONOR MAGIC V5 MBH-N49’s battery life through several modes and settings available in Settings > Battery.

Power Saving mode: When enabled, some functions are disabled, background apps are restricted, and visual effects are weakened to reduce power consumption. It is recommended to enable this when the battery is at 20% or lower.

Ultra Power Saving mode: Disables most features and apps, leaving only basic functions like calls and messages, to significantly extend standby time.

Performance mode: Adjusts power settings for maximum performance, which will drain the battery more quickly. Enable this when the battery is sufficient and you need high performance.

Smart Charge: Learns your charging habits to manage the charging process intelligently, reducing battery wear by pausing charging at a certain level overnight and resuming before you wake up. Enable this in More battery settings.

Smart Battery Capacity: Intelligently adjusts the maximum available battery capacity based on its current state to slow down wear and prolong its lifespan. Enable this in More battery settings.