LG 85QNED92 (01) PDF Document

To ensure the safe operation of your LG 85QNED92, please adhere to the following safety instructions:

Electric Shock Prevention:

• Do not remove the cover or back of the TV. There are no user-serviceable parts inside. Refer servicing to qualified personnel.

• The exclamation point symbol alerts you to important operating and maintenance instructions.

• The lightning flash with arrowhead symbol alerts you to the presence of uninsulated “dangerous voltage” within the product’s enclosure.

Fire and Moisture Prevention:

• To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

• To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

Do not place the LG 85QNED92 TV and/or its remote control in the following environments to prevent fire, electric shock, combustion/explosion, malfunction, or product deformation:

• An area exposed to direct sunlight.

• Near any heat source such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area with high humidity such as a bathroom.

• Near flammable objects such as gasoline or candles.

• An area exposed to rain or wind.

• An area that may be exposed to water droplets or splashes. Do not place items containing liquid (vases, cups, etc.) on top of the device.

• An area that may be directly exposed to air conditioner airflow.

• An area with excessive dust.

• In a confined space such as a bookcase where there is improper ventilation.

• On a carpet or cushion.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

• Make sure the power cord is connected securely to the TV and wall socket. If not secured, damage to the plug and socket may occur, and in extreme cases, a fire may break out.

• Do not touch the end of the power cord while it is plugged in. You may be electrocuted.

• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

If any of the following occur, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when unused for long periods of time.

Even if the TV is turned off by remote control or button, the AC power source is still connected to the unit if not unplugged in.

• Store the accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

• Check the condition of the remote control batteries regularly to prevent corrosion of the contacts.

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage the screen.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

• When you clean the device, unplug the power cord and wipe gently with a soft/dry cloth.

• Do not spray water or other liquids directly on the device.

• Do not clean the device with chemicals such as glass cleaner, air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the device and/or its panel. This may result in electric shock or device damage.

• When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel (depending on model).

• Make sure to wring any excess water or cleaner from the cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

1. Lift and tilt the TV into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation.

2. Connect the power cord to a wall outlet.

Important Notes:

• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product, as this may cause damage.

• Do not use any unapproved items to ensure safety and product life span. Any damage or injuries caused by using unapproved items are not covered by the warranty.

• When assembling the stand, ensure that all of the provided screws are attached. If the screws are not fully tightened, the product may tilt or tip over, resulting in damage. Tightening the screws with excessive force may cause them to come off due to abrasion of the screw joint.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts already inserted at the eye-bolts position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

• Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. If you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.

• Use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting the TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects (depending on model).

Antenna/Cable Connection:

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

Satellite Dish Connection:

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model)

You can simply operate the TV functions using the single button located on the TV.

• Power On: Press the button once.

• Power Off: Press and hold the button. All running apps will close, and any recording in progress will stop.

• Menu Control: Press the button when the TV is on to access and adjust the menu.

• Menu Selection: Press and hold the button when you access menu control to use a function.

• When connecting an HDMI cable, the TV and the external device should be turned off and unplugged.

• If the device connected to the Input Port also supports HDMI Deep Colour, your picture may be clearer. If the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Colour] setting to off.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI Cable Type: Ultra High Speed HDMI®/™ cable (3 m or less).

• For an optimal connection, HDMI cables should have bezels less than 10 mm thick and 18 mm width.

Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly (depending on model).

For an optimal connection, USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port (depending on model).

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the Back and Home buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Alternatively, press and hold the Home and Q. Settings buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed closer than 0.2 m, the Magic remote control may not perform as expected due to frequency interference.

This feature allows you to operate the TV and connect to Bluetooth with direct voice recognition while the power is off (depending on model).

• To enable, go to → [General] → [Always Ready], and set [Enable the function] to on.

• Pressing the Power button while watching TV switches the screen to [Always Ready] mode. Pressing it again turns the screen off while keeping [Always Ready] active.

• To return to watching TV from [Always Ready] mode, press the Home button or the Back button.

• To display the wallpaper when the screen is in [Always Ready] mode (but turned off), press the Wheel (OK) button. Press the Power button to return to watching TV.

Note: Using Always Ready may increase energy consumption.

Power: Turns the TV on or off.

Home Hub: Accesses the [Home Hub] or changes the input source.

Home: Accesses the Home menu or activates the screen zoom function.

Wheel (OK): Press the centre of the button to select a menu. You can change programmes by using the wheel.

Up/Down/Left/Right: Press to scroll the menu. When the pointer is active, the Magic Remote works like a general remote. Shake the remote to make the pointer reappear.

Back: Returns to the previous level or closes the on-screen display and returns to the home menu.

Volume buttons: Adjusts the volume level or mutes all sounds.

Accessibility: Accesses the [Accessibility] app or shortcuts.

GUIDE: Accesses the [Guide].

LIST: Accesses the saved programmes list.

AI: (Network connection required) Activates voice recognition or checks for recommended content.

AI (Voice): Speak while pressing and holding the button to use the voice recognition feature.

More actions: Displays more remote control functions.

AD/SAP: Enables the audio descriptions function.

Q. Settings: Accesses the Quick Settings or the All Settings menu.

Programme buttons: Scrolls through the saved programmes.

Various services button (1): Connects to various services such as streaming and voice search.

**To use buttons marked with a double asterisk, press and hold for more than 1 second.

Power: Turns the TV on or off.

Number buttons (0-9): Enters numbers.

LIST: Accesses the saved programmes list.

QUICK ACCESS: Accesses the [Edit Quick Access], a feature to directly open a specified app or Live TV.

More actions (…): Displays more remote control functions.

Volume buttons: Adjusts the volume level.

Programme buttons: Scrolls through the saved programmes.

Mute: Mutes all sounds or accesses [Accessibility Shortcuts].

Home: Accesses the Home menu or activates the screen zoom function.

AI (Voice): (Network connection required) Speak while pressing and holding to use voice recognition or check for recommended content.

Wheel (OK): Press the centre to select a menu. Use the wheel to change programmes.

Up/Down/Left/Right: Press to scroll the menu.

Back: Returns to the previous level or closes the TV screen and returns to the home menu.

Home Hub: Accesses the [Home Hub] or changes the input source.

Q. Settings: Accesses the Quick Settings or the All Settings menu.

Colored Buttons (Red, Green, Yellow, Blue): These access special functions in some menus. Red button also runs the record function.

Various services button (1): Connects to various services such as streaming and voice search.

**To use buttons marked with a double asterisk, press and hold for more than 1 second.

Power: Turns the TV on or off.

TEXT / T.OPT: These buttons are used for teletext.

Input: Changes the input source or accesses the [Home Hub].

Q. Settings: Accesses the Quick Settings or the All Settings menu.

Number buttons (0-9): Enters numbers.

GUIDE: Accesses the [Guide] or the saved programmes list.

QUICK ACCESS: Accesses the [Edit Quick Access].

Volume buttons: Adjusts the volume level.

Programme buttons: Scrolls through the saved programmes.

Navigation buttons (up/down/left/right): Scrolls through menus or options.

OK: Selects menus or options and confirms your input.

Back: Returns to the previous level or closes the on-screen display.

AD: Enables the audio descriptions function.

Mute: Mutes all sounds or accesses [Accessibility Shortcuts].

Search: Checks for recommended content or searches for content like TV programmes and movies.

REC (•): Starts to record and displays record menu (Only Time MachineReady supported model).

Control buttons (II, ▷, ▷▷): Control buttons for media contents.

Colored Buttons (Red, Green, Yellow, Blue): These access special functions in some menus. The Red button also runs the record function.

Home: Accesses the Home menu or activates the screen zoom function.

Various Services Buttons (2): Buttons for Home Hub, User Guide, Favourite Programme list, and TV/LG Channels.

**To use buttons marked with a double asterisk, press and hold for more than 1 second.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and properly installed (positive to positive, negative to negative).

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated on the settings related time.

• This product is equipped with an auto-off function that automatically turns off the power if the remote control is not used for 15 minutes without an input signal.

• Turn the TV off/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

• Flicker: If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with the product.

• Pixel Dots: This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• Brightness and Colour Variation: You may find different brightness and colour of the panel depending on your viewing position (left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not a malfunction.

• Image Sticking: Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. Avoid touching the screen or holding your finger(s) against it for long periods of time, as this may produce some temporary distortion effects.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.