Free English GODOX C01 KIT1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD GODOX C01 KIT1 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the main features of the GODOX C01 KIT1 wireless microphone?
The main features of the GODOX C01 KIT1 include:
• Max. 200m stable wireless transmission.
• Clear and stable recording with noise cancellation function.
• Transmitter provides 9h of battery life.
• Receiver supports using while charging the connected phone.
• 48kHz/24bit high quality sound.
• Transmitter weighs merely 7g.
What items are included in the GODOX C01 KIT1 package?
The GODOX C01 KIT1 package contains the following items:
• Transmitter x1
• Receiver x1
• Magnetic Charging Cable x1
• Magnet x1
• Instruction Manual x1
• Cartoon Stickers x1
What are the safety warnings for the GODOX C01 KIT1?
Please adhere to the following safety warnings when using the GODOX C01 KIT1:
• This product is a high-precision instrument; please avoid falling, collision, or pounding.
• Do not disassemble, modify, or attempt to repair this product without permission.
• Should repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• Do not use in flammable and explosive environments.
• There is a danger of explosion if the battery is not replaced properly. Replace only with a battery of the same type or equivalent. Replacement should be done by service personnel only, not general personnel.
• Consumers who use a power adapter for charging should purchase a CCC-certified power adapter that meets the requirements of the standard.
How do I install the transmitter and receiver of the GODOX C01 KIT1?
Transmitter Installation:
The transmitter can be magnetically attached to clothing for hands-free use.
Receiver Installation:
Directly connect the receiver to your smartphone’s charging port. You can also charge the smartphone through the receiver’s port while it is in use.
How do the buttons and indicator lights on the GODOX C01 KIT1 transmitter work?
Button Operations:
• Press once (x1): Toggles noise cancellation on/off.
• Press twice (x2): Initiates pairing and acts as a remote shutter for photos.
• Press and hold for 2 seconds (2s): Toggles the power on/off.
Indicator Light Meanings:
• Flash green slowly: Unpaired.
• Flash green quickly: Pairing.
• Constant on green: Paired with noise cancellation off.
• Constant on orange: Noise cancellation is on.
• Constant on red: Low battery level.
• Breathe blue: Charging.
• Constant on blue: Fully Charged.
What are the functions of the buttons and indicator lights on the GODOX C01 KIT1 receiver?
Button Operations:
• Press once (x1): Toggles noise cancellation on/off.
• Press twice (x2): Initiates pairing.
• Press and hold for 3 seconds (3s): Adjusts the volume. This function is only available in a paired state and cycles through low, medium, and high levels.
Indicator Light Meanings:
• Flash green slowly: Unpaired.
• Flash green quickly: Pairing.
• Constant on green: Paired with noise cancellation off.
• Constant on orange: Noise cancellation is on.
• Constant on red: Indicates a low battery level in the corresponding transmitter.
• Flash blue once: Volume is set to Level 1 (low).
• Flash blue twice: Volume is set to Level 2 (medium).
• Flash blue three times: Volume is set to Level 3 (high).
How can I check the battery level of the GODOX C01 KIT1 charging case?
The indicator lights on the charging case show the current battery level as follows:
• One light on (●○○○): 0-25% battery
• Two lights on (●●○○): 25%-50% battery
• Three lights on (●●●○): 50%-75% battery
• Four lights on (●●●●): 75%-100% battery
What is the operating frequency and power of the GODOX C01 KIT1?
• Operating frequency: 2402MHz – 2480MHz
• C01 TX Maximum EIRP Power: 5dBm
• C01 RX Maximum EIRP Power: 5dBm
What are the technical specifications of the GODOX C01 KIT1 components?
| Product Name | Transmitter | Receiver | Charging Case |
|---|---|---|---|
| Model | C01 TX | C01 RX | C01 Charging Case |
| Transmission Type | 2.4GHz Frequency Hopping System | ||
| Pickup Pattern | Omnidirectional | ||
| Frequency Range | 20Hz~20KHz | ||
| Max. SPL | 115dB SLP | ||
| SNR | > 65dB | ||
| Max. Wireless Distance | 200m (sight distance) | ||
| Input Parameters | 5V ⎓ 90mA | 20V ⎓ 3A (Max.) 5V ⎓ 600mA |
|
| Output Parameters | 20V ⎓ 3A (Max.) | 5V ⎓ 0.2A(*2) (Max.) Total Output: 5V ⎓ 0.4A |
|
| Lithium Battery Parameters | 3.87V, 97mAh, 0.376Wh | 3.7V, 600mAh, 2.22Wh | |
| Battery Life | Approx. 9h | Charge 2 devices for about twice | |
| Charging Time | Approx. 1.5h | Approx. 1.5h | |
| Working Environment Temperature | -10~50°C | ||
| Charging Environment Temperature | 0°C~45°C | 0°C~45°C | |
| Dimension | ≈ 0.97″ * 0.98″ * 0.49″ | ≈ 1.57″ * 1.04″ * 0.35″ | ≈ 3.46″ * 1.22″ * 1.4″ |
| Net Weight | ≈ 7g | ≈ 5g | ≈ 49g |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD GODOX C01 KIT1 (01) PDF DOCUMENT