GODOX FH50 R (01) PDF DOCUMENT

The main features of the GODOX FH50 R Flexible Handheld LED Light include:

• The light body structure is thin and flexible, allowing for versatile lighting in narrow spaces or for irregular objects.

• Wide CCT range adjustable from 2500K to 10000K in increments of 100K.

• The light features an HSI color mode with 36,000 colors, providing more light source color options for video recording.

• The bottom of the light is equipped with a 1/4″ screw hole, which allows you to mount the light on a commonly used LED light stand or a standard stand adapter.

• This product features 14 commonly used lighting effects for video production, including flash, light bulb, and TV lighting effects.

• You can remotely control the light body using the optional 2.4G wireless remote control RC-R9II or the “Godox Light” app.

• By purchasing a D-TAP to DC male connector cable, this light can be powered by a 14.8V V-mount battery, making it suitable for outdoor video recording.

The main parts of the GODOX FH50 R are:

• LED Beads

• Corner Guards

• Display

• Power Switch Button

• FN Dial

• Dimming/Select Dial

• DC Input Port

• 1/4″ Screw Hole

The GODOX FH50 R package contains the following items:

• Light Body x1

• Carry Bag x1

• Adapter x1

• Stand Adapter x1

• AC Power Cord x1

• Instruction Manual x1

The following optional accessories are available for the GODOX FH50 R:

• Rectangular Softbox FS50

• Pancake Lantern FP50

• ML Series Video Light Accessory Set ML-AK

Power Switch Button

After you connect the AC adapter to the power supply, short press the power switch button to turn on the unit.

Brightness Adjustment

When the light is in CCT/HSI/FX mode, turn the Dimming/Select dial to adjust the brightness from 0% to 100%. Turn left to decrease the brightness by 1 unit while turning right to increase the brightness by 1 unit, with quick adjustment available by turning quickly.

Mode Selection

Short press the Dimming/Select dial to switch between CCT/HSI/FX modes.

1. CCT Mode

Short press the FN dial in the CCT setting interface to select CCT adjustment (from 2500K to 10000K) or GM adjustment (from -50 to +50). Turn the FN dial left once to decrease the CCT value by 100K or the GM value by 1 unit, while turn right once to increase the CCT value by 100K or the GM value by 1 unit, with quick adjustment available.

2. HSI Mode

Short press the FN dial in HSI setting interface to select H (hue, adjustable from 0° to 360°) or S (saturation, adjustable from 0% to 100%). Turn the FN dial left once to decrease the hue value by 1 unit or the saturation value by 1 unit, while turn the FN dial right once to increase the hue value by 1 unit or the saturation value by 1 unit, with quick adjustment available.

3. FX Mode

Short press the FN dial in FX setting interface to select effect type (14)/speed value. Turn the FN dial to adjust the settings.

Long press the Select dial to enter the wireless setting. Turn the FN dial to select Bluetooth/2.4G Wireless/CH/GR/ID, then turn the Select dial to adjust settings or reset.

Bluetooth: Optional selection of Bluetooth MAC code, RESET (Reset) or OFF (Off). When “RESET” is selected, short press the select dial, the display will show “Reset”, indicating that the device is resetting. Once the reset is complete, it will automatically return to the wireless setting interface.

Wireless (<…>): ON/OFF

CH: 32 channels(1-32).

GR: 16 groups(A-F/0-9).

ID: OFF/99 IDs(1-99).

Note: When using remote control RC-R9II, the CH, GR and ID of RC-R9II should be the same as those of the light body.

You can scan the QR code in the instruction manual to download the “Godox Light” app, which is available for both Android and iOS systems. The app should be V3.0 or above.

Note: The app can be used directly on the first installed device (smartphone or tablet). When changing to another mobile device, the light must be reset before the normal usage of the app.

To lock the panel, long press the FN dial. A lock icon will be displayed on the panel. To unlock, long press the FN dial again.

The following data are averages, not absolute values, and are based on 100% brightness with a bare light.

This product is professional lighting equipment and should be used by professional lighting engineers or under their guidance. Basic safety attentions must always be followed:

1. Before use, please read and understand these instructions and attentions.

2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.

3. This lighting product is not an ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.

5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.

When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

• If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.

• Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm it is normal before use.

• If the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.

• Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.

• If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.

• Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer.

• Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment.

• For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of the power outlet. This equipment needs to be connected to a grounded outlet.

• This product is only suitable for use in -20°C to +40°C operating environment and normal humidity environment.

• This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.

• Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.

• Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.

When cleaning, do not wipe it with a damp cloth. Please use a dry cloth or a soft cloth to wipe the dirt off the equipment. Please take off the protective cover before using.

• Some products are battery powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required.

• If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns.

• Do not use any deformed or modified batteries. Do not disassemble or modify this product or battery. Do not heat or solder the battery. Keep the battery away from fire or water.

• Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together.

• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

• Keep out of reach of children.

• As this product is not waterproof, do not use in rain or in damp conditions.

• Do not leave or store the product if the ambient temperature reads over 40°C.

• Do not use the product in the presence of flammable gas. In certain circumstances, please pay attention to the relevant warnings.

Operating frequency: 2412.99MHz – 2464.49MHz (2.4G only receive) / 2402MHz – 2480MHz (BT)

Maximum EIRP Power: 5dBm