GODOX TL60 (01) PDF MANUAL

GODOX TL60 (01) PDF SUMMARY:

How do you turn the RGB tube light on or off?

Use the power switch to control the on or off of the RGB tube light.

---

How do you switch between CCT mode, RGB mode, and special effects mode?

Press the MOD button to switch between the different modes. CCT mode is displayed as CCT on the screen, RGB mode is displayed as HSI, and special effects mode is displayed as FX.

---

How do you adjust the color temperature in CCT mode?

Press the “+” or “-” button to adjust the color temperature from 2700K to 6500K.

---

How do you adjust the brightness in CCT mode?

Press the DIM button, then press the “+” or “-” button to adjust the brightness from 0 to 100.

---

How do you adjust the hue in colorful mode?

Press the FN multifunction select dial until H is selected, then press the “+” or “-” button to adjust the hue from 0 to 360°.

---

How do you adjust the saturation in colorful mode?

Press the FN multifunction select dial until S is selected, then press the “+” or “-” button to adjust the saturation from 0 to 100.

---

How do you choose different special effects categories?

Press the “+” or “-” button to choose different special effects categories from 1 to 14.

---

How do you select modes within a special effects category?

After choosing a category, press down the FN multifunctional select dial to choose from I, II, and III. The modes will display circularly while pressing the FN button.

---

How many special effects modes are there, and how are they divided?

There are 39 special effects modes, divided into 14 categories.

---

How do you choose the control mode?

Press the wireless button, then press the “+” or “-” button to choose the control mode. After choosing the mode, press the FN or wireless button to enter the relevant setting interface. Press the wireless button or other button to exit the setting interface.

---

How do you turn on or off the 2.4G wireless?

Press the FN button to select the wireless icon, then press the “+” or “-” button to switch on or off the 2.4G wireless. “ON” means 2.4G wireless is turned on and “OFF” means turned off.

---

How do you set the 2.4G wireless channel?

Press the FN button to select CH, then press the “+” or “-” button to select from 32 channels from 1 to 32.

---

How do you set the 2.4G wireless group?

Press the FN button to select GR, then press the “+” or “-” button to select from 6 groups A to F.

---

How do you set the 2.4G wireless ID?

Press the FN button to select ID, then press the “+” or “-” button to select from 99 IDs from 1 to 99.

---

How do you turn the Bluetooth on or off?

Press the FN button to select the Bluetooth, then press the “+” or “-” button to switch on or off. “ON” means the Bluetooth is on and “OFF” means it is off.

---

How do you reset the Bluetooth password?

Press the FN button to select RESET, then press the “+” or “-” button to reset the Bluetooth.

---

How do you set the DMX control mode to FOLLOW?

Set the light to FOLLOW mode and press the FN button to choose ADD.

---

How do you set the DMX address?

Press the “+” or “-” button to set 512 ADDs from 001 to 512.

---

How do you connect the DMX cable?

Connect one end of the DMX cable to the DMX output port of the control center and the other end to the DMX input port of the light.

---

How do you set the DMX to LEAD mode?

Set one of the LED lights to LEAD mode.

---

How do you set the DMX to FOLLOW mode?

Set other lights to FOLLOW modes.

---

How do you synchronize lights in FOLLOW mode with the light in LEAD mode via DMX?

Connect the lights with an RJ45 cable, and the lights in FOLLOW modes will automatically synchronize with the light in LEAD mode.

---

What is the maximum quantity of lights in FOLLOW mode when using the DMX LEAD and FOLLOW modes?

The quantity of lights in FOLLOW modes cannot be over 18.

---

How do you choose a color gel?

Press the color gel button to enter the interface, then press the “+” or “-” button to choose R-Gel or L-Gel group, then press the FN to enter the color gel group to select the corresponding color gel. There are 20 color gels in each group, 40 in total.

---

How do you download the smartphone app?

Scan the QR code on the light body to download the “GodoxLight” smartphone APP.

---

How do you connect the light to the smartphone app?

Set the Bluetooth of the light to ON.

---

Where can you find more information about using the smartphone app?

Open the “help” section in the app for detailed guidance.