GODOX FH50 BI (01) PDF DOCUMENT

The GODOX FH50 BI Flexible Handheld LED Light has the following features:

• The light body structure is thin and flexible, allowing for versatile lighting in narrow spaces or for irregular objects.

• It has a wide CCT range adjustable from 2800K to 6500K in increments of 100K.

• The bottom of the light is equipped with a 1/4″ screw hole, which allows you to mount the light on a commonly used LED light stand or a standard stand adapter.

• The product features 11 commonly used lighting effects for video production, including flash, light bulb, and TV lighting effects.

• You can remotely control the light body using the optional 2.4G wireless remote control RC-A6II or the “Godox Light” app.

• By purchasing a D-TAP to DC male connector cable, this light can be powered by a 14.8V V-mount battery, making it suitable for outdoor video recording.

This product is professional lighting equipment and should be used by professional lighting engineers or under their guidance. Always follow these basic safety attentions:

1. Before use, please read and understand these instructions and attentions.

2. Professional lighting is prohibited for children. Supervise children closely to prevent personal injury.

3. This is not for general lighting. Anyone with eye damage or sensitive eyes should avoid using this product.

4. When the lamp is on, do not touch high-temperature parts like LED lamp beads to avoid burns.

5. Do not look directly at the lamp beads when the lamp is on. If eye discomfort occurs, turn off the lamp, suspend use, and see a doctor.

6. If a lamp bead is damaged or deformed by heat, stop using the equipment and contact qualified personnel for replacement.

7. This product is suitable for use in -20°C to +40°C operating environment and normal humidity.

8. Do not use damaged equipment or accessories. Wait for professional repair.

9. If the casing is broken from a drop or impact, do not use it to avoid electric shock.

10. If an extension cord is needed, use one with a current rating greater than or equal to that of the equipment to prevent overheating.

11. Place long power cords properly to avoid contact with hot surfaces or causing a trip hazard. Use the certified power cord from the original manufacturer.

12. Always unplug the equipment before cleaning and repairing. Hold the plug to remove it from the outlet, do not pull the cord. This equipment must be connected to a grounded outlet.

13. This equipment is not waterproof. Keep it dry and do not immerse it in water. Install it in a dry, ventilated place and avoid rainy, humid, dusty, or overheated environments.

14. Do not disassemble the product. If it fails, it must be repaired by authorized personnel.

15. Ensure the equipment has cooled down completely before storing. Unplug the power cord for storage.

16. Do not place the equipment near flammable solvents like alcohol or gasoline.

17. Do not use accessories not recommended by the factory.

18. Use a dry or soft cloth to clean the equipment; do not use a damp cloth.

19. Remove the protective cover before use.

20. This product complies with ROHS, CE and FCC certification.

21. Safety instructions are subject to change. For the latest information, please check for the latest electronic instruction.

22. For products with built-in lithium batteries, use specified chargers and operate within the proper voltage and temperature range.

23. For battery-powered products, do not use unspecified batteries, power sources, or accessories. Keep batteries away from children. If a battery is swallowed, seek immediate medical attention. If a battery leaks, becomes discolored, emits smoke, or an abnormal odor, remove it immediately and carefully to avoid burns. Do not use deformed or modified batteries, disassemble, heat, solder, or expose them to fire or water.

24. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty.

25. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance.

26. Machine failures caused by non-standard operation are not covered by the warranty.

▲ Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.

▲ Keep out of reach of children.

▲ As this product is not waterproof, do not use in rain or in damp conditions.

▲ Do not leave or store the product if the ambient temperature reads over 40°C.

▲ Do not use the product in the presence of flammable gas. In certain circumstances, please pay attention to the relevant warnings.

The main parts of the GODOX FH50 BI are:

• LED Beads

• Corner Guards

• Display

• FN Dial

• Dimming/Select Dial

• Power Switch Button

• DC Input Port

• 1/4″ Screw Hole

The package for the GODOX FH50 BI includes:

• Light Body*1

• Carry Bag*1

• Adapter*1

• Stand Adapter*1

• AC Power Cord*1

• Instruction Manual*1

The following optional accessories are available for the GODOX FH50 BI:

• Rectangular Softbox FS50

• Pancake Lantern FP50

• ML Series Video Light Accessory Set ML-AK

After you connect the AC adapter to the power supply, short press the power switch button to turn on the unit. Press it again to turn it off.

When the light is in CCT or FX mode, turn the Dimming/Select dial to adjust the brightness from 0% to 100%. Turn the dial left to decrease the brightness by 1 unit at a time, and turn it right to increase the brightness by 1 unit. Turning the dial quickly allows for faster adjustments.

To switch between CCT (Color Temperature) and FX (Special Effects) modes, short press the Dimming/Select dial.

First, ensure you are in CCT mode. Short press the FN dial to select the CCT adjustment setting. The adjustable range is from 2800K to 6500K. Turn the FN dial left to decrease the CCT value by 100K or turn it right to increase the CCT value by 100K. Turning the dial quickly allows for faster adjustments.

In the FX setting interface, short press the FN dial to select either the effect type (11 options) or the speed value. Then, turn the FN dial to adjust the selected setting.

The following table details the available FX modes:

You can download the “Godox Light” app for both Android and iOS systems. The app can be used directly on the first device it is installed on (smartphone or tablet). If you wish to use the app on a different mobile device, the light must be reset before use. The app should be version 3.0 or above.

Long press the Select dial to enter the wireless setting menu. Turn the FN dial to cycle through the options: Bluetooth, 2.4G Wireless, CH (Channel), GR (Group), and ID. After selecting an option, turn the Select dial to adjust its settings or reset.

• Bluetooth: Options are Bluetooth MAC code, RESET, or OFF.

• Wireless (<y>): ON/OFF

• CH: 32 channels (1-32)

• GR: 16 groups (A-F/0-9)

• ID: OFF/99 IDs (1-99)

Note: When using the remote control RC-A6II, the CH, GR, and ID of the remote must be the same as those set on the light body.

To lock the panel, long press the FN dial until the lock icon appears on the display. To unlock, long press the FN dial again.

The following data are averages, not absolute values, based on 100% brightness with a bare light.

*Design and specifications may be subject to change without notice.

The operating frequency and maximum EIRP power for the GODOX FH50 BI are as follows:

• Operating frequency: 2412.99MHz – 2464.49MHz (2.4G only receive) / 2402MHz – 2480MHz (BT)

• Maximum EIRP Power: 5dBm

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.