BOAT AAVANTE BAR 1550 PRO (01) PDF Document

The components list for the BOAT AAVANTE BAR 1550 PRO includes:

• 1X Soundbar

• 1X Subwoofer

• 1X AUX Cable

• 1X User Manual

• 1X Remote Control

• 1X Warranty Card

• 1x Wall Mounting Accessories

The functions of the soundbar control panel buttons are as follows:

1. Power Button: Short press for standby ON/OFF.

2. Input Button: Short press in steps to choose among Bluetooth, Optical, HDMI(ARC), USB and AUX modes.

3. – Button: Short press to return to the previous track; long press to decrease volume.

4. Play/Pause Button:

• In Bluetooth mode, short press to play/pause; long press to disconnect/reconnect.

• In USB mode, short press to play/pause.

• In AUX mode, short press to mute/unmute.

5. LED Button: Short press to turn on/off the soundbar LED.

6. + Button: Short press to skip to the next track; long press to increase the volume.

The rear of the soundbar has the following ports:

1. AUX IN

2. OPTICAL

3. HDMI(ARC)

4. AC IN (AC110~240V 50/60Hz)

The remote control for the BOAT AAVANTE BAR 1550 PRO has the following button functions:

1. Power Button: Standby mode for Power ON/OFF.

2. Mute: Mute ON/OFF.

3. Pair: Connect or disconnect Bluetooth; long press the button to disconnect or reconnect to Bluetooth.

4. INPUT: Switch among input modes: BT (Bluetooth), OPT (Optical), HDMI(ARC), USB, and AUX.

5. Volume+: Increase the volume.

6. Volume-: Decrease the volume.

7. Next Button: In Bluetooth mode, short press for the next song; in USB mode, short press for the next song and long press for fast forward.

8. Previous Button: In Bluetooth mode, short press for the previous song; in USB mode, short press for the previous song and long press for fast backward.

9. Reset / Play-Pause Button: In Bluetooth and USB mode, short press to play/pause; in AUX mode, short press to mute/unmute; long press the button to reset the soundbar and clear Bluetooth memory.

10. MUSIC: For MUSIC EQ effect.

11. MOVIE: For MOVIE EQ effect.

12. NEWS: For NEWS EQ effect.

13. 3D: For 3D EQ Effect.

14. TREB+: Increase treble.

15. TREB-: Decrease treble.

16. BASS+: Increase bass.

17. BASS-: Decrease bass.

1. Open the battery panel.

2. Insert 2 batteries, ensuring the polarity is correct.

3. Close the battery panel.

Keep the remote control within 8m-10m of the soundbar unit. It is recommended to remove the batteries when the unit is not being used for a long period of time.

Follow these steps to wall mount your soundbar:

• Measure 24.41 inches (620mm) and drill 2 parallel holes (1/4 inch each) in the wall.

• Firmly apply a dowel into each hole in the wall (a dowel is required only for a solid wall).

• Attach the soundbar to the screws on the wall and push the soundbar to the right 1/8 inch to lock it in.

First, plug in the power cable of the soundbar to an external power socket; the unit will enter standby mode. Then, short press the Power Button on the remote or the soundbar control panel to turn on the soundbar.

Use the provided 3.5mm AUX cable to connect external audio sources to the soundbar. Press the Input button on the remote control to select AUX mode.

Use an HDMI cable to connect the soundbar to your HDMI(ARC) enabled device. Press the Input button on the remote control to select HDMI(ARC) mode.

Use an Optical cable to connect the soundbar to your Optical device. Press the Input button on the remote control to select OPT mode.

Insert your USB drive into the USB port on the soundbar. The soundbar will automatically switch to USB mode. You can also press the Input button on the remote control to switch to USB mode manually.

Press the Input button on the remote control to enter Bluetooth mode. Turn on the Bluetooth functionality on your media device, search for “Aavante Bar 1550 Pro” and select it to establish pairing.

Please adhere to the following safety warnings:

• To reduce the risk of electric shock, do not dismantle the product. It has no user-serviceable parts inside. Refer servicing to qualified personnel only.

• Do not expose the apparatus to rain or moisture.

• Children should be supervised to ensure they do not play with the appliance.

• To prevent possible hearing damage, do not listen at high volume levels for long periods or at a sudden high volume level.

• Never use the device unsupervised. Switch it off when not in use.

• If the power supply cord is damaged, it must be replaced by the manufacturer or qualified personnel.

• Check that the system’s voltage matches your local power supply before operating.

• Ensure proper ventilation by leaving at least 20 cm of space above and 5 cm on each side of the unit. Do not block ventilation openings.

• The apparatus must not be exposed to dripping or splashing. Do not place objects filled with liquids on the unit.

• To prevent fire or shock, do not expose the equipment to direct heat, rain, moisture, or dust.

• Do not place the unit near water sources or on an amplifier or receiver.

• Do not place the unit in a damp area or close to a strong magnetic field.

• Clean with a clean, dry, or slightly damp cloth. Do not use chemical solvents.

• When unplugging, always pull directly on the plug, never on the cord.