BOAT AIRDOPES 341ANC (01) PDF Document

The package for the BOAT AIRDOPES 341ANC contains the following items:

• 1N Airdopes 341ANC

• 2N Extra Earmuffs

• 1N Type C Cable

• 1N User Manual

• 1N Charging Case

• 1N Warranty Card

• 1N Catalogue

• 1N FAQ Card

There are two ways to power on your BOAT AIRDOPES 341ANC earbuds:

1. Smart Power On: Simply open the lid of the charging case while the earbuds are inside. The IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically.

2. Manual Power On: Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds.

Step 1: To switch the earbuds on, either open the lid of the charging case (Smart Power On) or long touch the CTC on both earbuds for 3 seconds (Manual Power On).

Step 2: Both earbuds will automatically pair with each other and enter the Connection Mode.

Step 3: Turn on the Bluetooth functionality on your phone or media device and scan for available devices.

Step 4: Search for ‘Airdopes 341ANC’ in the list and pair with it.

Congratulations! Your earbuds are now successfully connected via Bluetooth.

Note:

• The pairing mode lasts for 5 minutes. If you miss this window, you will need to reconnect the earbuds by following the procedure again.

• Your BOAT AIRDOPES 341ANC remembers previously connected devices. Once switched on, the earbuds will automatically reconnect to the last paired device if it is within range.

To charge the earbuds, please insert them back inside the charging case in the correct orientation.

Note: Before using the earbuds for the first time, it is recommended to fully charge them. Also, please keep the lid of the charging case closed while charging.

To charge the case, plug one end of the provided Type C cable into the case and connect the other end to a computer, wall adapter, power bank, etc. When the case is fully charged, a solid green LED will turn on to indicate a 100% battery level.

The case has different LED indications for battery level and charging status.

Case Battery Status (When not charging, on opening the lid):

Case Charging Status Indication:

Earbud Charging Indication (When inserting earbuds into the case with the lid closed):

• CYAN for 5 seconds indicates the LEFT earbud is charging from the case.

• PURPLE for 5 seconds indicates the RIGHT earbud is charging from the case.

• If both are properly charged, BLUE for 5 seconds.

• Ambient Mode, ANC, and Normal Modes: Long touch the right CTC for 3 seconds to switch between Ambient mode, ANC mode, and Normal mode. The cycle is Ambient -> ANC -> Normal.

• Active Noise Cancellation (ANC): Long touch the right CTC for 3 seconds to activate ANC mode. Long touch it again for 3 seconds to switch to Normal mode (ANC and Ambient OFF).

• Answer Incoming Calls: Single tap the CTC on either earbud.

• Hang Up / Reject Calls: Double tap the CTC on either earbud.

• Play/Pause Music: Single tap the CTC on either earbud.

• Next Track: When playing music, double tap the right CTC.

• Previous Track: When playing music, double tap the left CTC.

• Voice Assistant: Long touch the CTC on the left earbud for 3 seconds.

• BEAST™ Mode (Low Latency): Triple tap the left CTC to switch to BEAST™ Mode. You will hear a sound prompt. Triple tap the left CTC again to turn it off.

• Volume Control: Volume can only be controlled via your connected media device.

Step 1: Long touch the CTC on the left earbud for 3 seconds to activate the voice assistant.

Step 2: The respective voice assistant screen will pop up on your device, and you may place your commands.

Tips: You can try commands like “What is the weather?”, “Play a song”, or “Set a reminder”.

Note: If the voice assistant doesn’t get triggered, the functionality has to be first enabled via your media device’s settings.

There are two methods to power off your earbuds:

Smart Power Off:

Step 1: After usage, remove both earbuds from your ears.

Step 2: Place the earbuds back into the charging case in the correct orientation and close the lid.

Step 3: The earbuds will automatically switch off and enter charging mode.

Manual Power Off:

Step 1: Long touch both CTCs for 5 seconds to manually power off the earbuds.

Step 2: Once the earbuds are turned off, place them back inside the case and close the lid.

Yes, both earbuds can be used in mono mode.

Step 1: Use either Smart Power On or Manual Power On for switching on the desired earbud.

Step 2: The selected earbud will automatically enter the connection mode.

Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 341ANC’ to connect.

Note: To switch back to Stereo mode, simply take the other earbud out of the case. It will automatically power on and pair with the previously selected earbud. You cannot skip tracks or return to the previous tracks while in Mono mode.

• 3 Seconds: Long touch the left CTC to activate the voice assistant.

• 3 Seconds: Long touch both CTCs to manually power on.

• 5 Seconds: Long touch both CTCs to manually power off.

• 10 Seconds: Long press the Reset Button on the case to perform a factory reset.

Perform a Factory Reset if you face any difficulty while operating your Airdopes 341ANC.

*NOTE: Before performing the reset, clear “Airdopes 341ANC” from your device’s pairing history by forgetting the device.

Step 1: Place the earbuds inside the case.

Step 2: While the earbuds are inside the case, long press the Reset Button for 10 seconds until the LED blinks 5 times on the charging case as well as the earbuds. Keep the lid open during this process.

Step 3: Close the lid and then re-open it again after a few seconds.

Step 4: Perform a fresh connection attempt and enjoy! Your Airdopes 341ANC has been reset.

Please follow these instructions and warnings for safe operation:

• Please follow the instructions to operate.

• Please don’t use the ear-buds in extreme temperatures.

• Please don’t use the product near water.

• Please keep the product away from heat sources, as the heat may damage it.

• Don’t jam the ports such as charger port, LED port, etc.

• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life.

Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switched on at first. This can be done by using the phone / media device.