ASUS USB-BT500 (03) PDF DOCUMENT

To install the hardware for the ASUS USB-BT500, insert the adapter into a USB Type A port on your device.

To successfully install the ASUS USB-BT500 on a laptop or desktop that has a built-in Bluetooth module, you must first go to the Windows Device Manager and disable the computer’s built-in Bluetooth before installing the ASUS USB-BT500 adapter.

You need to download and install the latest driver for the ASUS USB-BT500. If you are using Windows® 10 and are connected to the internet, the system will detect the driver automatically. Follow the on-screen instructions to download and install the latest driver.

Search for “Bluetooth” in the Windows® Search box to open the Bluetooth settings panel. In the panel, ensure that you have turned on Bluetooth and applied adequate settings.

The ASUS USB-BT500 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

If the ASUS USB-BT500 causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

No, the transmitter for the ASUS USB-BT500 must not be co-located or operating in conjunction with any other antenna or transmitter.

The ASUS USB-BT500 must be installed and operated in accordance with the provided instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

To reduce the risk of medical device interference, maintain a minimum distance of at least 15 cm (6 inches) between implanted medical devices (such as pacemakers, insulin pumps, etc.) and the ASUS USB-BT500.

Yes, please observe the following precautions:

• Pay particular attention to personal safety when using this device in airports, hospitals, gas stations, and professional garages.

• Use the ASUS USB-BT500 in good reception conditions to minimize the radiation level.

• Keep the device away from pregnant women and the lower abdomen of teenagers.

Use the ASUS USB-BT500 in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F). Do not expose the device to or use it near liquids, rain, or moisture.