Free English V-ZUG GK46TIXS (01) PDF Document. Free English V-ZUG GK46TIXS (01) PDF User Guide. Free English V-ZUG GK46TIXS (01) PDF User Manual. Free English V-ZUG GK46TIXS (01) PDF Owner Guide. Free English V-ZUG GK46TIXS (01) PDF Owner Manual. Free English V-ZUG GK46TIXS (01) PDF Reference Guide. Free English V-ZUG GK46TIXS (01) PDF Instruction Guide. Free English V-ZUG GK46TIXS (01) PDF Reference Manual. Free English V-ZUG GK46TIXS (01) PDF Instruction Manual. Free English V-ZUG GK46TIXS (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD V-ZUG GK46TIXS (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How can I avoid damaging my V-ZUG GK46TIXS hob?
To avoid damaging your V-ZUG GK46TIXS hob, please follow these guidelines:
• In the case of thermal failure, switch the solid plate off and allow it to cool down completely. Do not put any dishes on it or cool it with cold water.
• Do not climb onto the appliance.
• To avoid damaging the silicon grouting, do not put hot cookware on the frame.
• Do not cut or prepare food on the surface or drop hard objects onto it. Do not drag cookware across the surface.
• Make sure that no sugary foods or juices end up on the hot cooking zones. If they do, remove them immediately with a glass ceramic hob scraper while the hob is still hot to prevent damage.
• Do not leave the appliance unattended during operation.
• Pots with pure copper or aluminium bases should not be used, as they can leave behind traces that are difficult to clean and may permanently ruin the visual appearance of the appliance if not removed immediately.
• Lift pots and cookware when placing them on or removing them from the glass ceramic surface to avoid scratches caused by sliding.
• Be aware that signs of usage like scratches are normal with daily use and do not affect the function or safety of the appliance.
What should I know before using my V-ZUG GK46TIXS for the first time?
Before first use, your V-ZUG GK46TIXS must be installed and connected to the electricity supply in accordance with the separate installation instructions by a qualified fitter/electrician.
During the first few hours of use, a cooking zone may give off an unpleasant smell. This is normal for a new appliance. Ensure that the room is well ventilated.
Where is the identification plate on my V-ZUG GK46TIXS?
The identification plate, which includes the serial number (FN), and the connection plate are located on the underside of the V-ZUG GK46TIXS hob. A second identification plate is supplied and should be affixed in the fitted unit underneath the hob for easier access.
What are the cooking zones on the V-ZUG GK46TIXS?
The V-ZUG GK46TIXS hob has four cooking zones:
• 1 cooking zone Ø 210 mm
• 2 cooking zones Ø 180 mm
• 1 cooking zone Ø 145 mm
What are the buttons on the control panel of my V-ZUG GK46TIXS and what do they do?
The buttons on your V-ZUG GK46TIXS control panel are:
• Power button (circle with vertical line): Switches the device ON/OFF.
• Slider (0 . . . . . . . . P): Used to set the power level.
• P: Activates PowerPlus.
• II (Pause): Activates/deactivates Pause cooking and is used for the Restore function.
• Hand/Wipe symbol: Activates/deactivates Wipe protection.
• 8 (square): Selects a cooking zone.
• 88 (clock): Used for setting the operating time/timer.
What do the displays on my V-ZUG GK46TIXS indicate?
The display elements on your V-ZUG GK46TIXS indicate the following:
1. Power level of the cooking zone: Shows the current power setting (e.g., 9).
2. Selection point: A dot that illuminates to show which cooking zone is selected.
3. Operating time activated: A symbol (arrow) that shows the operating time is active.
4. Cooking zone indicator light for the operating time: A dot next to the timer display that corresponds to the active cooking zone.
5. Operating time/timer: Displays the set time (e.g., 99).
6. Pause activated/restoration of saved setting possible: An illuminated dot near the Pause (II) button.
7. Wipe protection activated: An illuminated dot near the Wipe protection (hand) button.
How does the induction hob on the V-ZUG GK46TIXS work?
The V-ZUG GK46TIXS induction hob works using induction coils under the glass ceramic plate. These coils produce a rapidly changing magnetic field that directly heats the magnetic base of the cookware. The glass ceramic plate itself is only warmed by the heat from the hot cookware. Removing the cookware from the cooking zone immediately interrupts the supply of energy. Induction hobs are quick reacting, finely adjustable, powerful, energy-efficient, and safe.
How does the pan detection feature work on the V-ZUG GK46TIXS?
Every cooking zone on your V-ZUG GK46TIXS is equipped with pan detection. This feature recognizes cookware with a magnetisable base that is suitable for induction hobs.
• If cookware is removed during operation or if unsuitable cookware is used, the selected power level will flash alternately with a “U” symbol.
• If no cookware is placed on the cooking zone for 10 minutes, the cooking zone switches off automatically, and the display changes from the “U” symbol to “0”.
• The entire appliance will switch off after a further 10 seconds if no other cooking zone is active.
What kind of cookware is suitable for the V-ZUG GK46TIXS?
Only cookware with a full magnetic base is suitable for use with the V-ZUG GK46TIXS induction hob. You can check for suitability in the following ways:
• A magnet sticks anywhere on the base of the cookware.
• When placed on the hob, the power level you set illuminates and does not alternate with the pan detection symbol.
Do not heat unsuitable cookware using aids such as metal rings, as this can damage the hob.
How can I cook energy-efficiently with my V-ZUG GK46TIXS?
For maximum energy efficiency and even heat distribution on your V-ZUG GK46TIXS, please note the following:
• The base of the cookware must be clean, dry, and smooth.
• Centre the cookware in the middle of the cooking zone.
• Use a well-fitting lid.
• Match the diameter of the cookware to the quantity of food to be cooked.
Are there special instructions for using coated cookware on the V-ZUG GK46TIXS?
Yes, when using coated cookware on your V-ZUG GK46TIXS:
• Coated cookware, when empty, may never be heated at a power level higher than 7. The coating may otherwise become overheated and damaged.
• For frying, do not use a power level higher than 9.
• Never use the PowerPlus function with coated frying pans.
Why is my cookware making noise on the V-ZUG GK46TIXS?
Cookware can make noise during cooking on the V-ZUG GK46TIXS. This does not indicate any malfunction, nor does it affect the functioning of the appliance in any way. The noise depends on the cookware used. If the noise causes considerable disturbance, it can help to change the cookware.
How do I switch the V-ZUG GK46TIXS on and off?
To switch the appliance on:
Depress the Power button for 1 second. A “0” will flash in all the power level displays. If no other entry is made, the appliance will switch off again after about 10 seconds for safety reasons.
To switch the appliance off:
Touch the Power button.
How do I select a cooking zone and set the power level on my V-ZUG GK46TIXS?
1. After switching the appliance on, press the “8” button of the required cooking zone.
2. A “0” will flash in the corresponding power level display, and the selection point for this cooking zone will be illuminated.
3. Touch the slider or swipe it to set the desired power level.
Note: Settings for a cooking zone can only be changed when its selection point is illuminated. If it goes out, you must select the cooking zone again.
What are the different power levels for the V-ZUG GK46TIXS and their uses?
The power levels on your V-ZUG GK46TIXS are designed for various cooking methods:
| Power level | Cooking method | Use |
|---|---|---|
| L | Keeping warm | Sauces, keeps food ready for serving at around 65 °C |
| 1-2 | Melting, gentle warming | Butter, chocolate, gelatine, sauces |
| 3 | Swelling | Rice |
| 4-5 | Continued cooking, reducing, stewing | Vegetables, potatoes, sauces, fruit, fish |
| 6 | Continued cooking, braising | Pasta, soup, braised meat |
| 7 | Gentle frying | Rösti (hash browns), omelettes, breaded fried foods, sausages |
| 8 | Frying, deep frying | Meat, chips |
| 9 | Flash frying | Steak |
| P | Fast heating | Boiling water |
How do I switch a single cooking zone off on my V-ZUG GK46TIXS?
1. Press the “8” button of the required cooking zone. The selection point for this zone will illuminate.
2. Touch power level «0» on the slider.
If no other entry is made and all other cooking zones are switched off, the appliance will switch off completely after 10 seconds.
What does the residual heat indicator ‘H’ mean on my V-ZUG GK46TIXS?
After a cooking zone is switched off, an “H” will remain illuminated in its display as long as there is a risk of burns from residual heat on the glass ceramic surface.
How do I use the Keep Warm setting on my V-ZUG GK46TIXS?
The keep warm setting “L” keeps ready-cooked foods warm at approximately 65 °C. You can find this setting on the slider between power levels “0” and “1”. Simply select a cooking zone and move the slider to “L”.
How do I use the Melting function on my V-ZUG GK46TIXS?
The melting function gently melts items like butter, chocolate, or honey at 40 °C.
To switch the melting function on:
1. Select a cooking zone.
2. Hold power level “L” on the slider depressed for 2 seconds. Two horizontal bars “=” will illuminate in the power level display.
To switch the melting function off:
Use the slider to set any other power level.
How do I use the Simmer function on my V-ZUG GK46TIXS?
The simmer function cooks food like sausages, dumplings, and pasta below boiling point, at about 94 °C.
To switch the simmer function on:
1. Select a cooking zone.
2. Press the level “L” on the slider for 4 seconds. Three cross pieces will illuminate in the power level display.
To switch the simmer function off:
Set any other power level using the slider.
Note: In locations higher than 1500 m above sea level, it is recommended to use the simmer function without a pan lid.
How do I activate and use the PowerPlus function on the V-ZUG GK46TIXS?
The PowerPlus function provides extra high power for 10 minutes, ideal for heating a large quantity of water quickly. All cooking zones are equipped with this booster.
To switch PowerPlus on:
1. Press the “8” button of the required cooking zone.
2. Touch the slider past level 9 twice, until “P” is illuminated in the display.
After 10 minutes, the power level automatically reverts to level 9. If cookware is removed, PowerPlus is interrupted and will continue once the cookware is placed back on the zone.
To end PowerPlus before 10 minutes:
1. Press the “8” button of the required cooking zone.
2. Touch the required power level on the slider.
How does power management for PowerPlus work on the V-ZUG GK46TIXS?
On the V-ZUG GK46TIXS, the cooking zones are divided into two groups (A and B) for power management. PowerPlus cannot be used for both cooking zones of a single group at the same time. If PowerPlus is activated for the second zone in a group, the power of the first zone will be reduced automatically. The maximum available power levels are as follows:
Group A* (Cooking zones 1 and 2)
| PowerPlus in cooking zone | Max level in zone 1 | Max level in zone 2 |
|---|---|---|
| 1 | P | 8 |
| 2 | 8 | P |
Group B* (Cooking zones 3 and 4)
| PowerPlus in cooking zone | Max level in zone 3 | Max level in zone 4 |
|---|---|---|
| 3 | P | 6 |
| 4 | 8 | P |
*Maximum available power levels in cooking zones. If the power level is raised above these values, PowerPlus switches off.
How do I use the Automatic Boost function on the V-ZUG GK46TIXS?
The Automatic Boost function heats a cooking zone at power level 9 for a specific duration before automatically switching back to your pre-selected power level. This function must be activated each time a cooking zone is switched on.
To switch Automatic Boost on:
1. Press the “8” button of the required cooking zone.
2. Press and hold the desired final power level on the slider for 3 seconds.
3. As long as the boost is active, “A” and the selected power level will illuminate alternately in the display.
To switch Automatic Boost off before time:
1. Press the “8” button of the required cooking zone.
2. Set a lower power level using the slider.
The duration of the boost depends on the selected power level:
| Power level | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Boost in mins:secs | 0:40 | 1:15 | 2:00 | 3:00 | 4:15 | 7:15 | 2:00 | 3:15 |
How do I set the operating time for a cooking zone on the V-ZUG GK46TIXS?
The operating time function allows a cooking zone to switch off automatically after a set time from 1 to 99 minutes.
1. Set the required power level for the cooking zone.
2. Press the “8” button of the required cooking zone.
3. Press the “88” (timer) button. “00” appears in the display, and the second digit flashes.
4. Set the second digit (minutes) of the operating time using the slider.
5. Press the “88” button again. The first digit flashes.
6. Set the first digit (tens of minutes) of the operating time using the slider.
7. Press the “88” button a final time. The operating time starts.
How do I change the operating time on my V-ZUG GK46TIXS?
To change a previously set operating time:
1. Press the “8” button of the required cooking zone. The remaining operating time will be displayed.
2. Press the “88” (timer) button.
3. Change the second digit of the operating time using the slider.
4. Press the “88” button.
5. Change the first digit of the operating time using the slider.
6. Press the “88” button. The changed operating time starts.
How do I switch the operating time off before it ends on my V-ZUG GK46TIXS?
To cancel the operating time and keep the cooking zone active:
1. Press the “8” button of the required cooking zone.
2. Press the “88” (timer) button.
3. Set the second digit of the operating time to “0” using the slider.
4. Press the “88” button.
5. Set the first digit of the operating time to “0” using the slider.
6. Press the “88” button. The cooking zone remains in operation without a set operating time.
How do I use the Timer function on my V-ZUG GK46TIXS?
The timer functions like an egg timer for 1-99 minutes and can only be set when at least one cooking zone is in operation.
Setting the timer:
1. Switch on the appliance.
2. Press the “88” (timer) button. “00” appears, and the second digit flashes.
3. Set the second digit using the slider.
4. Press the “88” button. The first digit flashes.
5. Set the first digit using the slider.
6. Press the “88” button. The timer starts.
Changing the timer:
1. Press the “88” button to display the remaining time.
2. Follow the steps for setting the timer to enter a new duration.
Switching the timer off before time:
1. If a cooking zone is in operation, press the “88” button.
2. Set both digits to “0” one after another using the slider.
3. If no cooking zone is in operation, turn the appliance on and off again.
How do I use the Childproof Lock on the V-ZUG GK46TIXS?
The childproof lock prevents the appliance from being accidentally switched on.
Switching the childproof lock on:
1. Switch the appliance on.
2. Ensure all cooking zones are switched off.
3. Touch the “II” (pause) and wipe protection buttons at the same time. An acoustic signal is emitted.
4. Touch the “II” button again. An acoustic signal is emitted, and a lock symbol illuminates in all power level displays for 10 seconds. The lock is now on.
Operating the appliance with the lock activated:
1. Switch the appliance on.
2. Touch the “II” and wipe protection buttons at the same time. An acoustic signal is emitted. The lock is temporarily overridden, and the hob can be used as normal. The lock reactivates automatically when you switch the hob off.
Switching the childproof lock off permanently:
1. Switch the appliance on. No cooking zone must be in operation.
2. Touch the “II” and wipe protection buttons at the same time. An acoustic signal is emitted.
3. Press the wipe protection button again. A double acoustic signal is emitted, and “0” flashes in all power level displays for 10 seconds. The childproof lock is now switched off.
How do I use the Restore function on my V-ZUG GK46TIXS?
If the appliance was switched off accidentally with the power button, your settings can be restored within 6 seconds.
1. Switch the appliance on again within 6 seconds.
2. The illuminated point for the “II” (pause) button will flash.
3. Press the “II” button to restore all previous settings.
How does the Pause Cooking function work on the V-ZUG GK46TIXS?
The Pause Cooking function temporarily reduces the power level of all active cooking zones to “1” for up to 10 minutes. The operating time is interrupted, but any set timer continues to run.
To activate Pause Cooking:
Press the “II” button. The indicator light for the button illuminates. All buttons except Power, Pause, and Wipe Protection become inactive.
To resume cooking:
Press the “II” button again. The cooking zones will resume operation with their previous settings.
If the pause function is not turned off within 10 minutes, the appliance switches off completely.
What is Wipe Protection and how do I use it on my V-ZUG GK46TIXS?
Wipe protection prevents the power level from being changed accidentally, for instance when wiping the control panel with a cloth.
To activate it, press the wipe protection button (hand symbol). The indicator light for the button will illuminate, and the controls will be locked.
Wipe protection is switched off by pressing the button again or automatically after 30 seconds. You can press the main Power button at any time to switch the appliance off.
How should I clean the glass ceramic hob of my V-ZUG GK46TIXS?
To clean your V-ZUG GK46TIXS hob, preferably wait until it is cold to avoid burns. Clean after every use to prevent food residues from burning on.
• For everyday dirt: Use a soft cloth or sponge with water and a suitable cleaning agent. We recommend using protective cleaning agents.
• For encrusted dirt (e.g., boiled-over milk): Use a glass ceramic hob scraper while the hob is still warm.
• For sugary foods (e.g., marmalade): Remove immediately with a glass ceramic hob scraper while the hob is still warm to prevent damage to the surface.
• For melted plastic: Remove immediately with a glass ceramic hob scraper while the hob is still warm to prevent damage.
• For limescale stains: Use a small amount of lime-dissolving solution, like vinegar or lemon juice, when the hob has cooled down. Then clean again with a damp cloth.
Do not use scouring cleaning agents, all-purpose scouring pads, or steel wool, as these can damage the surface.
What should I do if my V-ZUG GK46TIXS is not working and the displays are off?
If the appliance is not working and displays are not illuminated, check the following:
| Possible cause | Solution |
|---|---|
| The fuse or circuit breaker for electrical installations in the home is defective. | Change the fuse or reset the circuit breaker. |
| The fuse or circuit breaker keeps blowing. | Call Customer Services. |
| An interruption in the power supply. | Check the power supply. |
Why is a ‘U’ symbol flashing alternately with the power level on my V-ZUG GK46TIXS?
This indicates an issue with pan detection. Please check the following:
| Possible cause | Solution |
|---|---|
| Cookware is not suitable for use with induction hobs. | Use suitable magnetic cookware. |
| Cookware is too small for the cooking zone selected. | Ensure cookware corresponds to the size of the cooking zone. |
Why is a lock symbol illuminated in the displays of my V-ZUG GK46TIXS?
If a lock symbol is illuminated in the displays, it means the childproof lock is activated. To operate the appliance, you need to temporarily override the lock as described in the operating instructions. To disable it permanently, follow the steps to switch the childproof lock off.
What should I do if my V-ZUG GK46TIXS emits a continuous acoustic signal, a symbol flashes, and it switches off?
This can happen for a few reasons related to the control panel:
| Possible cause | Solution |
|---|---|
| A button or a slider was touched for longer than 10 seconds. | Remove the object or clean up the food that has boiled over. The appliance can then be used again as normal. |
| An object (e.g., pan, dish) is on the control panel. | |
| Food boiled over onto the control panel. |
Why are ‘H’ and ‘0’ flashing alternately in the display of my V-ZUG GK46TIXS?
This indicates that the automatic safety shut-off was triggered. If a cooking zone has been running for a long time without any settings being changed, it switches off automatically for safety. You can switch the cooking zone back on again if required. The time until shut-off depends on the power level:
| Power level | L | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Safety shut-off after hrs.:mins. | 2:00 | 8:30 | 6:30 | 5:30 | 4:30 |
| Power level | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|
| Safety shut-off after hrs.:mins. | 3:30 | 3:00 | 2:30 | 2:00 | 1:30 |
Why is ‘H’ flashing in the display of my V-ZUG GK46TIXS?
A flashing ‘H’ indicates that the excess temperature protection of a cooking zone has been triggered. To resolve this:
• Allow the cooking zone to cool down.
• Continue cooking on a different cooking zone if needed.
• Check your cookware to ensure it is suitable and not damaged.
Why is ‘U0’ flashing in the display of my V-ZUG GK46TIXS?
This error message indicates an interruption in the power supply. Press any button to quit the error message. The appliance can then be used again as normal.
Why are ‘E’ and a number illuminated in the display of my V-ZUG GK46TIXS?
This error code can be caused by an obstruction of the air intake or a ventilation defect.
If an object is affecting air intake (e.g., paper underneath the hob):
1. Remove any objects in the drawer underneath the hob.
2. Press any button to cancel the error message.
3. After 10 minutes, the appliance can be used again as normal.
If ventilation is defective:
1. Note down the error number.
2. Note down the serial number (FN) of the appliance from the identification plate.
3. Call Customer Services.
What does it mean if ‘Er’ or ‘E’ and a number illuminate in the display of my V-ZUG GK46TIXS?
This indicates an internal error has occurred. If you see this message, please do the following:
1. Note down the full error number shown on the display.
2. Note down the serial number (FN) of your appliance. This can be found on the identification plate.
3. Call Customer Services for assistance.
CLICK HERE TO DOWNLOAD V-ZUG GK46TIXS (01) PDF DOCUMENT