Free English V-ZUG GK46TIS (01) PDF Document. Free English V-ZUG GK46TIS (01) PDF User Guide. Free English V-ZUG GK46TIS (01) PDF User Manual. Free English V-ZUG GK46TIS (01) PDF Owner Guide. Free English V-ZUG GK46TIS (01) PDF Owner Manual. Free English V-ZUG GK46TIS (01) PDF Reference Guide. Free English V-ZUG GK46TIS (01) PDF Instruction Guide. Free English V-ZUG GK46TIS (01) PDF Reference Manual. Free English V-ZUG GK46TIS (01) PDF Instruction Manual. Free English V-ZUG GK46TIS (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD V-ZUG GK46TIS (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the general safety precautions for using the V-ZUG GK46TIS?
Please follow these general safety precautions when using your V-ZUG GK46TIS:
• Read the operating instructions before using the appliance for the first time.
• This appliance can be used by children aged 8 and above and by persons with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, provided they are supervised or have been instructed on the safe use of the appliance and have understood the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be undertaken by children without supervision.
• If an appliance is not equipped with a mains cable and a plug or other means for disconnecting from the mains with a contact opening on each pole complying with the conditions of overvoltage category III for full isolation, an isolating device must be incorporated into the permanently installed electrical installation in accordance with the installation regulations.
• If the mains cable of this appliance is damaged, it must be replaced by the manufacturer or its Customer Services or a similarly qualified person in order to avoid hazard.
What are the appliance-specific safety precautions for the V-ZUG GK46TIS?
For your safety, please observe these appliance-specific precautions for the V-ZUG GK46TIS:
• WARNING: If the surface is cracked or there is damage to the material thickness, the appliance must be switched off and disconnected from the electricity supply in order to avoid a possible electric shock.
• WARNING: During use, the appliance and its exposed parts become hot. Please be careful to avoid the exposed parts of the heating elements.
• Never use a steam cleaner.
• Objects made of metal, e.g. knives, forks, spoons, covers or aluminium foil, should not be put on the hob as they can become hot.
• WARNING: Leaving fat or oil unattended on the hob can be dangerous and can lead to fires. NEVER try to extinguish a fire with water. Instead, switch the appliance off and then carefully cover the flames with an object such as a cover or a fire blanket.
• WARNING: Never leave objects on the hob as they pose a fire hazard.
• The appliance must not be operated with an external time switch or a separate remote control system.
What are the instructions for the correct use of the V-ZUG GK46TIS?
The V-ZUG GK46TIS is designed for use in the home for preparing food. No liability is assumed for any damage caused by improper use or incorrect handling.
• Any repairs, modifications or manipulations to the appliance, especially any electrically live parts, may only be carried out by the manufacturer, its Customer Services or a similarly qualified person. Repairs if carried out incorrectly may cause serious injury, damage to the appliance and fittings, as well as affect the functioning of the appliance.
• Use original spare parts only.
• Retain the operating instructions for future reference. If you sell the appliance or pass it on to a third party, include these operating instructions as well as the installation instructions.
• The appliance corresponds to recognised technology standards and the relevant safety regulations. Proper use of the appliance is, however, essential to avoid damage and accidents.
• The heated surface will remain hot for some time after it is switched off and will only cool down slowly to room temperature. Leave a sufficient amount of time before you carry out work such as cleaning the appliance.
Caution: Risk of burns!
Overheated fat and oil can easily catch fire. Never attempt to extinguish burning oil or fat with water. Danger of explosion! Smother the flames with a fire blanket. Keep doors and windows closed.
Caution: Risk of injury!
• Keep pets away from the device.
Caution: Risk to life!
• Packaging materials, e.g. plastic film and polystyrene, can be dangerous for children. Danger of suffocation! Keep packaging material away from children.
How can I avoid damaging my V-ZUG GK46TIS hob?
To prevent damage to your V-ZUG GK46TIS, please follow these guidelines:
• In the case of thermal failure, switch the solid plate off and allow to cool down completely. Do not put any dishes on it. Do not cool with cold water under any circumstances.
• Do not climb onto the appliance.
• To avoid damaging the silicon grouting, do not put hot cookware on the frame.
• Do not cut or prepare food on the surface or drop hard objects onto it. Do not drag cookware across the surface.
• Make sure that no sugary foods or juices end up on the hot cooking zones. This can damage the surface. If sugary foods or juices do end up on the hot cooking zones, remove these immediately with a glass ceramic hob scraper (while the hob is still hot).
• Do not leave the appliance unattended during operation.
• Pots with pure copper or aluminium bases should not be used for cooking as they leave behind traces that can be difficult to clean. If the traces are not removed immediately after cooking with a suitable cleaning agent, they can be permanently burned on and therefore permanently ruin the visual appearance of the appliance.
• Sliding pots and cookware across the glass ceramic causes scratches. You can largely avoid these by lifting pots and cookware when putting them into place.
• The hob is an item for daily use: signs of usage such as scratches or visible material abrasion from pots or cookware are normal. Intensive use leads to more distinctive signs of usage. In such cases, the appliance continues to function perfectly and a complaint is not justified. Safety is always guaranteed.
• There is no such thing as completely scratch-proof glass; scratches can even develop on sapphire glass, which is used in watches. The glass ceramic used is of the best quality available on the market.
What should I know before using my V-ZUG GK46TIS for the first time?
The appliance must be installed and connected to the electricity supply in accordance with the separate installation instructions. Have a qualified fitter/electrician carry out the necessary work.
During the first few hours of use, a cooking zone can give off an unpleasant smell. This is normal for brand new appliances. Ensure that the room is well ventilated.
Where is the identification plate on the V-ZUG GK46TIS?
The identification plate and the connection plate are located on the underside of the hob. A second identification plate is supplied and should be affixed in the fitted unit underneath the hob. It is recommended to note down the serial number (FN) from the plate.
What are the operating and display elements on the V-ZUG GK46TIS?
Buttons:
• Power Icon: Device ON/OFF
• 0 . . . . . . . . P: Slider (to set the power level)
• P: PowerPlus
• ||: Pause cooking ON/OFF and restore function
• Hand Icon: Wipe protection ON/OFF
• Cooking Zone Icon: Select the cooking zone
• Timer Icon: Operating time/timer
Displays:
1. Power level of the cooking zone
2. Selection point: cooking zone selected
3. Operating time activated
4. Cooking zone indicator light for the operating time
5. Operating time/timer
6. Pause activated/restoration of saved setting possible
7. Wipe protection activated
How do induction hobs like the V-ZUG GK46TIS function?
Induction hobs work very differently from conventional hobs or hot plates. The induction coils under the glass ceramic plate produce a rapidly changing magnetic field which directly heats up the magnetic base of the cookware. The glass ceramic plate is only warmed by the hot cookware. Removing the cookware from the cooking zone immediately interrupts the supply of energy.
Induction hobs are:
• quick reacting
• finely adjustable
• powerful
• energy-efficient
• safe
Induction hobs can only be used with cookware with a complete/full magnetic base.
How does the pan detection feature work on the V-ZUG GK46TIS?
Every cooking zone on the V-ZUG GK46TIS is equipped with pan detection, which recognizes cookware with a magnetisable base suitable for induction hobs.
• If cookware is removed during operation or unsuitable cookware is used, the selected power level flashes alternately with a specific symbol.
• If there is no cookware placed on the cooking zone during the pan detection time of 10 minutes:
– The cooking zone switches off automatically.
– The display changes from the flashing symbol to 0.
– The appliance switches off after 10 seconds if no other cooking zone is switched on.
What type of cookware is suitable for the V-ZUG GK46TIS?
Only cookware with a full magnetic base is suitable for use with the V-ZUG GK46TIS induction hob. You can check this in the following ways:
• A magnet sticks anywhere on the base of the cookware.
• On the hob, the power level set illuminates and the pan detection symbol does not alternate with the power level.
Do not heat any unsuitable cookware using aids such as metal rings and the like, as this can damage the hob.
How can I cook energy-efficiently with the V-ZUG GK46TIS?
For maximum energy efficiency and even heat distribution on your V-ZUG GK46TIS, note the following:
• The base of the cookware must be clean, dry and smooth.
• Centre the cookware in the middle of the cooking zone.
• Use a well-fitting lid.
• Match the diameter of the cookware to the quantity of food to be cooked.
What should I know about using coated cookware on the V-ZUG GK46TIS?
When using coated cookware on your V-ZUG GK46TIS, please be aware of the following:
• Coated cookware when empty may never be heated at a higher power level than 7. The coating may otherwise become overheated and damaged.
• For frying, do not use a higher power level than 9.
• Never use PowerPlus with coated frying pans.
Why does my cookware make noise during cooking on the V-ZUG GK46TIS?
Cookware can make noise during cooking on the V-ZUG GK46TIS. This does not indicate any malfunction, nor does it affect the functioning of the appliance in any way. Noise depends on the cookware used. If the noise causes considerable disturbance, it can help to change the cookware.
How do I switch the V-ZUG GK46TIS appliance on and off?
To switch the appliance on:
• Depress the Power button for 1 second.
– 0 flashes in all the power level displays.
– If no other entry is made, the appliance switches off again after about 10 seconds for safety reasons.
To switch the appliance off:
• Touch the Power button.
How do I select a cooking zone and set the power level on the V-ZUG GK46TIS?
1. Press the cooking zone selection button of the required cooking zone.
– 0 flashes in the corresponding display of the power level.
– The selection point of this cooking zone is illuminated.
2. Touch the slider or swipe it to set the power level.
Note: Settings for a cooking zone can only be changed when the corresponding selection point is illuminated. As soon as the selection point goes out, the cooking zone must be selected again.
What are the different power levels and their uses on the V-ZUG GK46TIS?
| Power level | Cooking method | Use |
|---|---|---|
| L | Keeping warm | Sauces, keeps food ready for serving at around 65 °C |
| 1 – 2 | Melting, gentle warming | Butter, chocolate, gelatine, sauces |
| 3 | Swelling | Rice |
| 4 – 5 | Continued cooking, reducing, stewing | Vegetables, potatoes, sauces, fruit, fish |
| 6 | Continued cooking, braising | Pasta, soup, braised meat |
| 7 | Gentle frying | Rösti (hash browns), omelettes, breaded fried foods, sausages |
| 8 | Frying, deep frying | Meat, chips |
| 9 | Flash frying | Steak |
| P | Fast heating | Boiling water |
How do I switch a cooking zone off on the V-ZUG GK46TIS?
1. Press the cooking zone selection button of the required cooking zone. The selection point of this cooking zone is illuminated.
2. Touch power level «0» on the slider.
If no other entry is made and the other cooking zones are switched off, the appliance switches off after 10 seconds.
What does the residual heat indicator ‘H’ mean on my V-ZUG GK46TIS?
After a cooking zone is switched off on your V-ZUG GK46TIS, ‘H’ remains illuminated as long as there is a risk of burns from residual heat.
How do I use the Keep Warm setting on the V-ZUG GK46TIS?
The keep warm setting ‘L’ on your V-ZUG GK46TIS keeps ready-cooked foods warm at approximately 65 °C. It can be found between power levels 0 and 1 on the slider.
How do I use the Melting function on the V-ZUG GK46TIS?
With the melting function, items like butter, chocolate, or honey can be gently melted at 40 °C.
Switching the melting function on:
• Hold power level ‘L’ on the slider depressed for 2 seconds.
– Two horizontal bars illuminate in the power level display.
Switching the melting function off:
• Use the slider to set any other power level.
How do I use the Simmer function on the V-ZUG GK46TIS?
With the simmer function on your V-ZUG GK46TIS, sausages, dumplings, and stuffed pasta, for instance, can be cooked below boiling point at about 94 °C.
Switching the simmer function on:
• Press the level ‘L’ on the slider for 4 seconds.
– Three cross pieces are illuminated in the power level display.
Switching the simmer function off:
• Set any power level using the slider.
In locations higher than 1500 m above sea level, it is recommended to use the simmer function without the pan lid.
How does the PowerPlus feature work on the V-ZUG GK46TIS?
All cooking zones on the V-ZUG GK46TIS are equipped with the PowerPlus booster. When PowerPlus is switched on, the selected cooking zone works at extra high power for 10 minutes. PowerPlus can be used, for instance, to heat a large quantity of water quickly.
Switching PowerPlus on:
1. Press the cooking zone selection button of the required cooking zone.
2. Touch the slider past ‘9’ to ‘P’ or touch ‘P’ directly.
– ‘P’ is illuminated in the display.
– After 10 minutes, it automatically reverts to power level 9.
If the cookware is removed, PowerPlus is interrupted. PowerPlus continues as soon as the cookware is placed back on the cooking zone.
Ending PowerPlus before time:
1. Press the cooking zone selection button of the required cooking zone.
2. Touch the required power level on the slider.
How does power management work with PowerPlus on the V-ZUG GK46TIS?
On the V-ZUG GK46TIS, PowerPlus cannot be used for both cooking zones of a group (A or B) at the same time. If PowerPlus is activated for both cooking zones of a group, the power of the cooking zone that was initially set reduces. If the power level is raised above the specified values, PowerPlus switches off.
Group A (Zones 1 & 2)
| PowerPlus in cooking zone | Maximum available power level in zone 1 | Maximum available power level in zone 2 |
|---|---|---|
| 1 | P | 8 |
| 2 | 8 | P |
Group B (Zones 3 & 4)
| PowerPlus in cooking zone | Maximum available power level in zone 3 | Maximum available power level in zone 4 |
|---|---|---|
| 3 | P | 6 |
| 4 | 8 | P |
How do I use the Automatic Boost function on my V-ZUG GK46TIS?
WARNING: Do not leave the hob unattended when using the automatic boost. Risk of boiling over, burning on and igniting!
All cooking zones are equipped with a selectable automatic boost. With this function, a cooking zone works at power level 9 for a certain length of time, then it automatically switches back to the power level you set. The function must be activated anew each time a cooking zone is switched on.
| Power level | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Boost in mins.:secs. | 0:40 | 1:15 | 2:00 | 3:00 | 4:15 | 7:15 | 2:00 | 3:15 |
If a higher power level is selected during the automatic boost, the duration will change automatically.
Switching the automatic boost on:
1. Press the cooking zone selection button of the required cooking zone.
2. Press the required power level on the slider for 3 seconds.
– As long as the automatic boost is active, ‘A’ and the power level are illuminated alternately in the display.
– After the boost time has ended, the heat output is reduced to the selected power level again.
Switching the automatic boost off before time:
1. Press the cooking zone selection button of the required cooking zone.
2. Set a lower power level using the slider.
How do I set, change, or switch off the operating time for a cooking zone on the V-ZUG GK46TIS?
WARNING: Do not leave the hob unattended during use. Risk of boiling over, burning on and igniting!
With the operating time function, a cooking zone switches off automatically after a set time from 1-99 minutes.
Setting the operating time:
1. Set the required cooking zone.
2. Press the cooking zone selection button.
3. Press the timer button. ’00’ appears in the display, the second digit flashes.
4. Set the second digit of the operating time using the slider.
5. Press the timer button. The first digit flashes.
6. Set the first digit of the operating time using the slider.
7. Press the timer button. The operating time starts.
Changing the operating time:
1. Press the cooking zone selection button. The remaining time is displayed.
2. Press the timer button.
3. Change the second digit using the slider.
4. Press the timer button.
5. Change the first digit using the slider.
6. Press the timer button. The changed time starts.
Switching the operating time off before time:
1. Press the cooking zone selection button.
2. Press the timer button.
3. Set the second digit to 0 using the slider.
4. Press the timer button.
5. Set the first digit to 0 using the slider.
6. Press the timer button. The cooking zone remains in operation.
What happens at the end of the operating time on the V-ZUG GK46TIS?
After the operating time has ended:
• The assigned cooking zone is automatically selected.
• The assigned cooking zone switches off.
• An acoustic signal is emitted.
• ’00’, the operating time symbol, and the power level 0 flash.
Switch off the acoustic signal and displays by pressing any button.
If operating times are set for several cooking zones, the shortest remaining time is shown in the display. The indicator light for that cooking zone is also illuminated.
How do I use the timer function on the V-ZUG GK46TIS?
The timer functions like an egg timer for 1–99 minutes. It can only be set when a cooking zone is in operation. A cooking zone can be put into operation when the timer is running, but no operating time can be set for it.
Setting the timer:
1. Switch on the appliance.
2. Press the timer button. ’00’ appears and the second digit flashes.
3. Set the second digit using the slider.
4. Press the timer button. The first digit flashes.
5. Set the first digit using the slider.
6. Press the timer button. The timer starts.
Changing the timer:
1. Switch on the appliance.
2. Press the timer button to display the remaining time.
3. Change the second digit using the slider.
4. Press the timer button.
5. Change the first digit using the slider.
6. Press the timer button. The new timer starts.
Switching the timer off before time:
• If no cooking zone is in operation: Turn the appliance on and off again.
• If a cooking zone is in operation: Press the timer button, then set both digits to 0 one after another using the slider.
How do I activate, deactivate, and operate the V-ZUG GK46TIS with the childproof lock?
The childproof lock prevents the V-ZUG GK46TIS from being accidentally switched on.
Switching the childproof lock on:
1. Switch the appliance on. Ensure all cooking zones are switched off.
2. Touch the Pause (||) and Wipe Protection buttons at the same time. An acoustic signal is emitted.
3. Touch the Pause (||) button again. An acoustic signal is emitted.
– The childproof lock is now switched on.
– A symbol illuminates in all the power level displays for 10 seconds.
Operating the appliance with the childproof lock activated:
1. Switch the appliance on.
2. Touch the Pause (||) and Wipe Protection buttons at the same time. An acoustic signal is emitted.
– The childproof lock is overridden. The appliance can now be used as normal.
The childproof lock is automatically activated again after switching off the hob.
Switching the childproof lock off permanently:
1. Switch on the appliance. No cooking zone must be in operation.
2. Touch the Pause (||) and Wipe Protection buttons at the same time. An acoustic signal is emitted.
3. Press the Wipe Protection button again.
– A double acoustic signal is emitted.
– On all power level displays, 0 flashes for 10 seconds.
– The childproof lock is now switched off.
How does the Restore function work on the V-ZUG GK46TIS?
If the V-ZUG GK46TIS was switched off accidentally with the power button, the settings can be restored within 6 seconds.
1. Switch on the appliance.
– The illuminated point for the Pause (||) button flashes.
2. Press the Pause (||) button. Previous settings will be restored.
How do I use the Pause Cooking function on the V-ZUG GK46TIS?
With this function, the power level of all cooking zones that are switched on can be temporarily reduced to level 1 for up to 10 minutes. Afterwards, you can resume cooking with the previous settings.
• Press the Pause (||) button to activate.
– The indicator light for the button illuminates.
– The power level of any active cooking zone changes to 1.
– The operating time is interrupted, but the timer continues to run.
– All buttons except Power, Pause, and Wipe Protection are inactive.
If the pause cooking function is not turned off within 10 minutes, the appliance switches off completely.
• Press the Pause (||) button again to resume cooking. The cooking zones will return to their previous settings.
What is the Wipe Protection function and how do I use it on the V-ZUG GK46TIS?
This function prevents the power level from being changed accidentally, for instance when wiping the control panel with a cloth.
• Press the Wipe Protection button to activate it. The indicator light for the button illuminates.
• Wipe protection is switched off by pressing the button again or automatically after 30 seconds.
You can press the Power button to switch the appliance off at any time.
How should I clean and maintain my V-ZUG GK46TIS glass ceramic hob?
WARNING: Preferably, do not clean the appliance until it is cold. Burns hazard!
Clean the hob after every use to prevent food residues from burning on. Do not clean the glass ceramic surface with scouring cleaning agents, all-purpose scouring pads, steel wool, etc. as this can damage the surface.
• For cleaning everyday dirt, just use a soft cloth or sponge with water and a suitable cleaning agent. Follow the manufacturer’s advice with regard to cleaning agents. Using protective cleaning agents is recommended.
• Remove encrusted dirt, e.g. from milk that has boiled over, with a glass ceramic hob scraper while the hob is still warm. Follow the manufacturer’s advice for the scraper.
• Remove sugary foods, such as marmalade, which have boiled over with a glass ceramic hob scraper while the hob is still warm. Otherwise, this could damage the glass ceramic surface.
• Remove melted plastic with a glass ceramic hob scraper while the hob is still warm. Otherwise, this could damage the glass ceramic surface.
• Remove limescale stains using a small amount of lime-dissolving solution, e.g. vinegar or lemon juice, when the hob has cooled down. Then clean again with a damp cloth.
What should I do if my V-ZUG GK46TIS is not working and the displays are not illuminated?
| Possible cause | Solution |
|---|---|
| The fuse or circuit breaker for electrical installations in the home is defective. | Change the fuse or reset the circuit breaker. |
| The fuse or circuit breaker keeps blowing. | Call Customer Services. |
| An interruption in the power supply. | Check the power supply. |
Why is a symbol flashing alternately with the power level in the display of my V-ZUG GK46TIS?
| Possible cause | Solution |
|---|---|
| Cookware is not suitable for use with induction hobs. | Use suitable magnetic cookware. See the «Cookware» section. |
| Cookware is too small for the cooking zone selected. | Ensure cookware corresponds to the size of the cooking zone. |
Why is a symbol illuminated in the displays of my V-ZUG GK46TIS?
| Possible cause | Solution |
|---|---|
| The childproof lock is activated. | For operating the appliance with the childproof lock activated, see the «Operating the appliance» section. To deactivate it permanently, switch the childproof lock off. |
What should I do if a continuous acoustic signal is emitted, a symbol flashes, and the V-ZUG GK46TIS switches off?
| Possible cause | Solution |
|---|---|
• A button or a slider was touched for longer than 10 seconds. • Object (e.g. pan, dish) on the control panel. • Food boiled over onto the control panel. |
• Remove object or food that has boiled over. • The appliance can be used again as normal. |
Why are ‘H’ and a number flashing alternately in the display of my V-ZUG GK46TIS?
This indicates that the automatic safety shut-off was triggered. If a cooking zone has been running for longer without any settings being changed, the appliance switches the cooking zone off automatically. The time until shut-off depends on the power level set.
| Power level | L | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|
| Safety shut-off after hrs.:mins. | 2:00 | 8:30 | 6:30 | 5:30 | 4:30 | 3:30 | 3:00 | 2:30 | 2:00 | 1:30 |
To continue cooking, switch the cooking zone back on again if required.
Why is ‘H’ flashing in the display of my V-ZUG GK46TIS?
This indicates that the excess temperature protection of a cooking zone was triggered.
• Allow the cooking zone to cool down.
• Continue cooking on a different cooking zone.
• Check cookware.
Why is ‘U0’ flashing in the display of my V-ZUG GK46TIS?
This is caused by an interruption in the power supply.
• Press any button to quit the error message.
• The appliance can be used again as normal.
Why are ‘E’ and a number illuminated in the display of my V-ZUG GK46TIS?
| Possible cause | Solution |
|---|---|
| An object, e.g. paper, underneath the hob is affecting the air intake. | • Remove any objects in the drawer underneath the hob. • Press any button to cancel the error message. • After 10 minutes the appliance can be used again as normal. |
| Ventilation is defective. | • Note down the error number. • Note down the serial number (FN) of the appliance. See the identification plate for this. • Call Customer Services. |
What does it mean if ‘Er’ or ‘E’ and a number illuminate in the display of my V-ZUG GK46TIS?
This indicates that an internal error has occurred.
• Note down the error number.
• Note down the serial number (FN) of the appliance, which can be found on the identification plate.
• Call Customer Services.
What are the quick instructions for operating the V-ZUG GK46TIS?
First, please read the safety precautions in the operating instructions.
Switching the appliance on
• Hold the power button down for 1 second.
Setting the cooking zone
• Press the selection button of the required cooking zone. The selection point of this cooking zone is illuminated.
• Touch the slider or swipe it to set the power level.
Switching the cooking zone off
• Press the selection button of the required cooking zone.
• Touch 0 on the slider.
Switching the appliance off
• Press the power button.
CLICK HERE TO DOWNLOAD V-ZUG GK46TIS (01) PDF DOCUMENT