FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF DOCUMENT.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF USER GUIDE.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF USER MANUAL.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF OWNER GUIDE.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF OWNER MANUAL.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF REFERENCE GUIDE.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF REFERENCE MANUAL.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH TOHNICHI FTD20CN-S (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD TOHNICHI FTD20CN-S (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is a key safety warning regarding the grip of the TOHNICHI FTD20CN-S?
For your safety when using the TOHNICHI FTD20CN-S, make sure there is no oil or grease on the grip. A slip of the hand while tightening may cause an accident or injury.
What should I inspect my TOHNICHI FTD20CN-S for before use?
Before using your TOHNICHI FTD20CN-S, check for cracks, scratches, and rust. These conditions can cause damage to the driver and may result in an injury. If such conditions exist, have a functional test performed and repair if necessary.
Can I use the TOHNICHI FTD20CN-S beyond its maximum torque setting?
No, do not use the TOHNICHI FTD20CN-S torque driver beyond its maximum torque setting. This will cause damage or injury.
What should I do if my TOHNICHI FTD20CN-S is missing parts like a pin or scale plate?
Do not use the TOHNICHI FTD20CN-S torque driver if it is missing a pin, scale plate, or other parts. Ask a repair shop to inspect and repair the torque driver before using it.
Is it safe to modify the TOHNICHI FTD20CN-S?
No, do not modify the TOHNICHI FTD20CN-S torque driver. Modifications will weaken the torque driver. This may cause errors in accuracy, as well as cause an accident or injury.
What happens if I drop my TOHNICHI FTD20CN-S or subject it to a strong shock?
Do not drop the TOHNICHI FTD20CN-S torque driver or apply a strong shock or jolt. This will cause damage or deformation as well as decrease the accuracy and durability, which may cause an accident or injury.
What kind of parts should be used for repairing the TOHNICHI FTD20CN-S?
Use only parts designated by Tohnichi for repair of the TOHNICHI FTD20CN-S torque driver. For assistance with repairs, use only Tohnichi parts.
What should I confirm about the unit of measure on the TOHNICHI FTD20CN-S before using it?
Before using the TOHNICHI FTD20CN-S, confirm that the driver is set according to the correct unit of measure (e.g., kgf·cm, kgf·m, N·m, etc.).
Can I use the TOHNICHI FTD20CN-S in water?
No, do not use the TOHNICHI FTD20CN-S torque driver in fresh water or sea water. The inside mechanism will go bad and cause an accident or injury. If you drop the driver in water or sea water, get it checked out or repaired.
How do I select the correct bit for my TOHNICHI FTD20CN-S?
Use the correct bit that fits the screw you are using. Select the bit for your TOHNICHI FTD20CN-S from the table for bits.
Does the TOHNICHI FTD20CN-S require regular inspections?
Yes, perform regular inspections for function and accuracy on your TOHNICHI FTD20CN-S. Periodical inspections are essential to ensure the torque driver is in optimal condition, thus preventing injury.
How should I clean the TOHNICHI FTD20CN-S after use?
After each use and before storing your TOHNICHI FTD20CN-S, remove any dirt such as dust, mud, oil, and water. If left dirty, it can lead to operational failure and poor accuracy.
How should I store the TOHNICHI FTD20CN-S for a long period?
When storing the TOHNICHI FTD20CN-S torque driver for a long time, set it at the minimum torque and keep it in a dry place. If improperly stored, the accuracy and durability will decrease rapidly.
How should I properly attach or detach a bit from the TOHNICHI FTD20CN-S?
When you attach or detach a bit or a socket from the TOHNICHI FTD20CN-S, hold the shaft as shown in the manual’s diagram. Do not hold the grip when attaching or detaching a bit, as the tool might be broken.
What is the operating procedure for the TOHNICHI FTD20CN-S (FTD2-S Series)?
Follow these steps to operate your TOHNICHI FTD20CN-S:
1. Insert the bit into the bit holder.
2. Set the pointer to the “0” position on the scale plate.
3. Move the memory pointer to the “0” position opposite of the measuring direction.
4. Start the measuring or tightening operation.
What are the specifications for the TOHNICHI FTD20CN-S and other models in the FTD-S series?
The specifications for the TOHNICHI FTD-S series, including the TOHNICHI FTD20CN-S, are as follows. All models have an accuracy of ±3%.
| MODEL | CAPACITY | BOLT SIZE (REF) | OVERALL LENGTH (approx.) | WEIGHT (approx.) | ACCESSORY BIT | |||
|---|---|---|---|---|---|---|---|---|
| MIN-MAX | 1 GRAD. | SMALL SCREW | TAPPING SCREW | + | thickness×width | |||
| FTD2CN-S | 0.3~2 cN·m | 0.05 cN·m | M1 | M1 | 151mm | 0.14kg | #3 | 1.2×8 |
| FTD5CN-S | 0.5~5 | 0.1 | M1.2 | (M1.1) M1.2 | ||||
| FTD10CN-S | 1~10 | 0.2 | M1.6 | (M1.4) M1.6 | ||||
| FTD20CN-S | 3~20 | 0.5 | M2 | (M1.8) M2 | 272 | 0.37 | ||
| FTD50CN2-S | 5~50 | 1 | M2.5 | (M2.2) | ||||
| FTD100CN2-S | 10~100 | 2 | M3 (M3.5) | M2.5 M3 | ||||
| FTD200CN2-S | 30~200 | 5 | M4 | (M3.5) | ||||
| FTD400CN2-S | 50~400 | 10 | M5 | M4 | 338 | 0.9 | ||
| FTD8N2-S | 1~8 N·m | 0.2 N·m | M6 | (M4.5) | 0.93 | |||
| FTD16N2-S | 3~16 | 0.5 | M8 | M6 (M7) | ||||
What is the Torque Driver Tester used for with the TOHNICHI FTD20CN-S?
The Torque Driver Tester is an optional accessory used for the inspection and calibration of torque drivers like the TOHNICHI FTD20CN-S.
| MODEL | CAPACITY (cN·m) | 1 digit | |
|---|---|---|---|
| MIN | MAX | ||
| TDT60CN3 | 2 | 60 | 0.005 |
| TDT600CN3 | 20 | 600 | 0.05 |
CLICK HERE TO DOWNLOAD TOHNICHI FTD20CN-S (01) PDF DOCUMENT