Free English SONY BRAVIA KD-75X80CK (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SONY BRAVIA KD-75X80CK (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I open the Help Guide on my SONY BRAVIA KD-75X80CK?
To open the on-screen Help Guide, press the Input button on the remote control and select Help. If Help does not exist, select Edit and add Help.
What should I do if my SONY BRAVIA KD-75X80CK does not turn on immediately after being plugged in?
It takes time to initialize the system. Wait for about one minute, then operate the SONY BRAVIA KD-75X80CK again.
How can I perform a factory data reset on my SONY BRAVIA KD-75X80CK?
You can reset the SONY BRAVIA KD-75X80CK to factory settings by selecting Factory data reset in the menu. Alternatively, to force a factory data reset, unplug the AC power cord. Press and hold the power button on the SONY BRAVIA KD-75X80CK, then plug in the AC power cord.
What should I do if I have forgotten the parental lock password for my SONY BRAVIA KD-75X80CK?
Enter 4357 as the PIN and then enter the new PIN.
What should I do if the SONY BRAVIA KD-75X80CK remote control does not function?
Replace the batteries. Also, point the remote control directly at the IR sensor located on the SONY BRAVIA KD-75X80CK. Ensure no objects are blocking the path between the remote and the sensor. Fluorescent lamps can also interfere with the remote control; try turning them off.
How do I troubleshoot general issues like a black screen or no sound on my SONY BRAVIA KD-75X80CK?
Step 1. Restart your SONY BRAVIA KD-75X80CK by pressing the power button on the remote control for about five seconds. If the SONY BRAVIA KD-75X80CK does not recover, try unplugging the AC power cord then press the power button on the SONY BRAVIA KD-75X80CK and release it. Wait for two minutes, and plug in the AC power cord. Or, press the power button on the SONY BRAVIA KD-75X80CK for about 40 seconds until it turns off.
Step 2. Refer to the Help menu.
Step 3. Connect your SONY BRAVIA KD-75X80CK to the Internet and perform a software update.
Step 4. Perform a factory data reset.
What are the recommended steps to secure my SONY BRAVIA KD-75X80CK to a stand?
Step 1. Secure the stand for the SONY BRAVIA KD-75X80CK. Ensure the stand can support the weight of the SONY BRAVIA KD-75X80CK. Use two angle braces to secure the stand. Attach one side of the angle brace to the wall stud and the other side to the stand.
Step 2. Secure the SONY BRAVIA KD-75X80CK to the stand. Use M6 machine screws to screw into the rear cover of the SONY BRAVIA KD-75X80CK and use a screw or similar to attach to the stand. Use a rope or chain strong enough to support the weight of the SONY BRAVIA KD-75X80CK, ensuring there is no excess slack.
What is the wall mount hole pattern for my SONY BRAVIA KD-75X80CK?
The wall mount hole pattern for the SONY BRAVIA KD-75X80CK is 300 x 300 mm.
How do I safely transport my SONY BRAVIA KD-75X80CK?
Before transporting the SONY BRAVIA KD-75X80CK, disconnect all cables. Two or more persons are needed to transport the large SONY BRAVIA KD-75X80CK. Correct hand placement while carrying the SONY BRAVIA KD-75X80CK is important for safety and to avoid damage.
What should I consider when installing my SONY BRAVIA KD-75X80CK for the first time?
Ensure the SONY BRAVIA KD-75X80CK has adequate ventilation. Do not expose the screen to direct illumination or sunlight for best picture quality. Avoid installing the SONY BRAVIA KD-75X80CK in a room with reflective wall and floor materials. Avoid moving the SONY BRAVIA KD-75X80CK from a cold area to a warm area as this may cause moisture condensation; allow the moisture to evaporate completely before powering the SONY BRAVIA KD-75X80CK on.
How do I detach the Table-Top Stand from my SONY BRAVIA KD-75X80CK?
Step 1. Remove one side of the Table-Top Stand at a time. Firmly hold the Table-Top Stand securely with both hands while others lift the SONY BRAVIA KD-75X80CK.
Step 2. Repeat the previous step and remove the other side of the Table-Top Stand. Note that three or more people are required to detach the stand. Be careful not to use excessive force.
CLICK HERE TO DOWNLOAD SONY BRAVIA KD-75X80CK (01) PDF DOCUMENT