PYLE PDWMKRHD20 (01) PDF Document

To ensure safe operation of your PYLE PDWMKRHD20, please follow these safety instructions:

1. Do not use this device near Water.

2. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.

3. Do not defy the safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided prong does not fit your outlet, consult an electrician for possible replacement of the obsolete outlet.

4. Protect the power cord from being walked on or pinched, particularly at plugs, receptacles and or the point where they exit from the device.

5. Only use attachments and accessories specified or included.

6. Unplug this device during lightning storms or when not in use for prolonged periods.

7. Refer any or all servicing to a quality service center or personnel. Servicing is required when the device has been damaged, such as by liquid spillage, exposure to rain or moisture, excessive heat, being dropped, or if it malfunctions.

The package for the PYLE PDWMKRHD20 includes the following items:

• Main Device (1pc)

• Wired Mic (2pcs)

• Power Adaptor (1pc)

• 3.5mm/3.5mm Audio Cable (1pc)

• 3.5mm/2RCA Audio Cable (2pcs)

The PYLE PDWMKRHD20 has the following features:

• HDMI Outputs to connect to LCD TV, Media speaker, etc.

• 3.5mm stereo outputs to connect to amplifier, Computer, etc.

• HDMI Inputs to connect to HD player, Set-Top Box, etc.

• 3.5mm stereo inputs connect to CD player, Smart phone, etc.

• Main unit with 2 microphone inputs for wired microphones.

• Adjustable echo level for all microphones.

• Adjustable tone control for all microphones.

• Big rotary knob for controlling music volume.

• Front panel with a red LED light to indicate the power status.

• MIC 1, MIC 2 rotary knobs to simultaneously control wired microphone volume.

• 2 wired microphones are included.

System Specifications:

• HDMI input and output: HDMI 1.4

• THD: 0.5%

• Signal/Noise ratio: -90dB

• Frequency response: 30Hz~18kHz ±3dB

• Typical Tone control: ±15dB @ 10kHz

• Microphone max. Gain: +26dB

• Wired microphone input impedance: 22kΩ

• Stereo line input impedance: 10kΩ

• Power: 5V DC

Wired Microphone Specifications:

• Mic Element: Dynamic

• Directivity: Uni-directivity

• Frequency Response: 60-15KHz

• Sensitivity: -75dB±3dB

• Impedance: 600Ω

The front panel of the PYLE PDWMKRHD20 features the following:

• Music Volume: A large rotary knob to adjust the volume of the music source.

• Echo: A rotary knob to adjust the echo effect level for the microphones.

• MIC Volume: Two smaller rotary knobs (MIC 1 and MIC 2) to control the volume of the connected microphones.

• Tone: A rotary knob to adjust the tone (bass/treble) for the microphones.

• MIC Input: Two 1/4-inch jacks labeled MIC 1 and MIC 2 for plugging in the wired microphones.

• LED: An indicator light that turns on when the device is powered on.

• Power Switch: A button to turn the device on and off.

The rear panel of the PYLE PDWMKRHD20 has the following connection ports:

• HDMI IN: An HDMI input port to connect a source device like a DVD player, Set-Top Box, or computer.

• HDMI OUT: An HDMI output port to send the video and audio signal to a TV or monitor.

• AUDIO IN: A 3.5mm stereo input jack to connect an audio source like a smartphone, tablet, or CD player.

• AUDIO OUT: A 3.5mm stereo output jack to send the mixed audio (music and vocals) to an amplifier or powered speakers.

• DC 5V: The power input jack for connecting the included power adaptor.

The wired microphone has the following parts:

• ON/OFF Switch: A switch on the microphone body to turn it on or off.

• 6.35 Plug: A standard 1/4-inch plug to connect to the MIC 1 or MIC 2 inputs on the main unit.

• Cable (3M): A 3-meter long cable connecting the microphone to the plug.

To set up PC Karaoke Mode:

1. Connect the HDMI OUT port of your PC to the HDMI IN port on the PYLE PDWMKRHD20.

2. Connect the HDMI OUT port on the mixer to your TV or monitor’s HDMI input.

3. Connect the AUDIO OUT port on the mixer to the input of your powered speakers.

4. Plug the two wired microphones into the MIC 1 and MIC 2 inputs on the front of the mixer.

5. Connect the power adapter to the DC 5V port and turn on the device.

To set up the PYLE PDWMKRHD20 for sound mixing from a PC without video:

1. Connect the audio output from your PC to the AUDIO IN port on the PYLE PDWMKRHD20 using a 3.5mm audio cable.

2. Connect the AUDIO OUT port on the mixer to the input of your powered speakers.

3. Plug a wired microphone into one of the MIC inputs on the front panel.

4. Connect the power adapter and turn on the device. This setup allows you to sing along with audio playing from your computer through the speakers.

To connect your TV and DVD player for karaoke:

1. Connect the HDMI output from your DVD player to the HDMI IN port on the PYLE PDWMKRHD20.

2. Connect the HDMI OUT port on the mixer to an available HDMI input on your TV.

3. Connect the AUDIO OUT port on the mixer to the input on your external speakers or sound system.

4. Plug the wired microphones into the MIC 1 and MIC 2 inputs on the mixer.

5. Power on all devices. The video from the DVD player will pass through to the TV, and the audio will be mixed with your vocals and sent to the speakers.

To use your mobile device as the music source:

1. Connect the headphone jack of your mobile phone or tablet to the AUDIO IN port on the PYLE PDWMKRHD20 using a 3.5mm audio cable.

2. Connect the AUDIO OUT port on the mixer to your powered speakers.

3. Plug the wired microphones into the MIC 1 and MIC 2 inputs on the front panel.

4. Connect the power adapter and turn on the device. You can now play karaoke tracks from your mobile device and sing along through the speakers.

To use the system for a presentation or small meeting:

1. Connect the AUDIO OUT port on the PYLE PDWMKRHD20 to the input of a pair of powered speakers.

2. Plug one or two wired microphones into the MIC 1 and MIC 2 inputs on the front of the mixer.

3. Connect the power adapter and turn on the device.

4. You can optionally connect a music or audio source (like a laptop or phone) to the AUDIO IN port if background audio is needed.

Follow these steps to integrate the mixer with a notebook and HDMI amplifier:

1. Connect the HDMI output of your notebook to the HDMI IN port on the PYLE PDWMKRHD20.

2. Connect the HDMI OUT port on the PYLE PDWMKRHD20 to an HDMI input on your amplifier.

3. Plug the wired microphones into the MIC 1 and MIC 2 inputs on the front of the mixer.

4. Connect the power adapter to the mixer and turn on all devices. The audio and video from the notebook will be processed by the mixer and sent to your HDMI amplifier.

If the power indicator light is not on, please check the power adaptor and the cable to ensure they are properly connected to both the device and a working power outlet.

If the power indicator is on but you hear no sound, check the source device (e.g., PC, DVD player) to make sure it is playing audio and is not muted. Also, check your volume settings on the mixer, the source device, and your speakers/amplifier.

If you are experiencing harsh or distorted sound, try the following solutions:

• Reduce the volume level of the source device (e.g., your phone, PC, or DVD player).

• Change the placement angle between the microphone and the speaker to avoid feedback.

• Increase the distance between the microphone and the speaker.

If you believe the equipment is causing harmful interference, which can be confirmed by turning the PYLE PDWMKRHD20 off and on, you are encouraged to try correcting the problem by one or more of the following measures:

• Increase the distance between the radio/TV equipment and the main device.

• Connect the radio/TV equipment to an outlet on a different circuit than the one into which the receiver is plugged.

• If necessary, consult the dealer or an experienced radio/TV technician for help.

IMPORTANT: When connecting the main device to audio equipment, use only high-quality, shielded cables such as what is supplied with this product. Follow all installation instructions and do not modify the equipment in any way, as this could void your FCC authorization to use the device in the U.S.