PYLE PDWMKHRD22WM (01) PDF Document

1. Do not use this device near Water.

2. Do not install near any heat sources such as radiators, heat register, stoves, or other devices that produce heat.

3. Do not defy the safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug had two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the provided prong does not fit your outlet, consult an electrician for possible replacement of obsolete outlet.

4. Protect the power cord from being walked on or pinched, particularly at plugs, receptacles and or the point where they exit from the device.

5. Only use attachments accessories specified or included.

6. Unplug this device during lightning storms or when not in use for prolonged periods.

7. Refer any or all servicing to quality service center or personnel. Servicing is required when the device has been damaged to a point of malfunctions, such as liquid spillage, exposure to rain, moisture, excessive heat or dropping of the device.

The package contains the following items:

1. Main Device (1pc)

2. Wired Mic (2pcs) or Wireless Mic (2pcs) depending on the model (PDWMKRHD20 has 2 wired mics; PDWMKHRD22WM has 2 wireless mics)

3. Power Adaptor (1 pc)

4. 3.5mm/3.5mm Audio Cable (1pc)

5. 3.5mm/2RCA Audio Cable (2pcs)

6. AA Dry Battery (4pcs) for wireless mic only (with model PDWMKHRD22WM)

• HDMI Outputs to connect to LCD TV, Media speaker, etc.

• 3.5mm stereo outputs to connect to amplifier, Computer, etc.

• HDMI Inputs to connect to HD player, Set-Top Box, etc.

• 3.5mm stereo inputs connect to CD player, Smart phone, etc.

• Main unit with 2 microphone inputs for wired microphones.

• Adjustable echo level for all microphones.

• Adjustable tone control for all microphones.

• Big rotary knob for control music volume.

• Front panel with led light, red light to indicate the power status, blue light to indicate the wireless microphone status.

• MIC 1, MIC 2 rotary knob simultaneously control wired & wireless microphone volume.

• 2 UHF wireless microphones are included, powered by 2pcs 2A battery.

• HDMI Outputs to connect to LCD TV, Media speaker, etc.

• 3.5mm stereo outputs to connect to amplifier, Computer, etc.

• HDMI Inputs to connect to HD player, Set-Top Box, etc.

• 3.5mm stereo inputs connect to CD player, Smart phone, etc.

• Main unit with 2 microphone inputs for wired microphones.

• Adjustable echo level for all microphones.

• Adjustable tone control for all microphones.

• Big rotary knob for control music volume.

• Front panel with led light, red light to indicate the power status.

• MIC 1, MIC 2 rotary knob simultaneously control wired & wireless microphone volume.

• 2 wired microphones are included.

The front panel includes the following:

• Music Volume: A large rotary knob to control the volume of the music.

• Echo: A knob to adjust the echo effect for the microphones.

• MIC Volume: Two knobs (one for MIC 1 and one for MIC 2) to control the volume of the microphones.

• Tone: A knob to adjust the tone for all microphones.

• MIC Input: Two inputs labeled MIC 1 and MIC 2 for connecting wired microphones.

• LED: An indicator light.

• Power Switch: A button to turn the device on and off.

The rear panel includes the following ports:

• HDMI IN: HDMI input port.

• HDMI OUT: HDMI output port.

• AUDIO IN: 3.5mm audio input port.

• AUDIO OUT: 3.5mm audio output port.

• DC 5V: Power input port.

1. PC Karaoke Mode (Desktop PC & Notebook PC):

Connect your PC’s audio output to the AUDIO IN port on the main device. Connect the main device’s AUDIO OUT to your speakers. Connect microphones to the MIC 1 and MIC 2 inputs.

2. Sound Mode:

Connect your PC’s audio output to the AUDIO IN port on the main device. Connect a microphone to one of the MIC inputs. This setup is for using a single microphone with PC audio.

3. Connect with TV & DVD Player:

Connect the DVD player’s video out to the TV’s video in. Connect the DVD player’s audio out to the main device’s AUDIO IN port. Connect the main device’s AUDIO OUT to your speaker system. Connect microphones to the MIC inputs.

4. Connect with Mobilephone & MID:

Connect your mobile phone or Mobile Internet Device (MID) to the AUDIO IN port on the main device. Connect the main device’s AUDIO OUT to your speakers. Connect microphones to the MIC inputs.

5. Small Meeting Connection:

Connect the main device’s AUDIO OUT to a pair of powered speakers. Connect microphones to the MIC 1 and MIC 2 inputs.

6. Connect with HDMI Amplifier & Notebook:

Connect the notebook’s HDMI output to the HDMI IN on the main device. Connect the main device’s HDMI OUT to the HDMI IN on your amplifier. Connect microphones to the MIC inputs.

7. Connect with HDMI Blue-Ray Player and TV:

Connect the Blu-Ray Player’s HDMI output to the HDMI IN port on the main device. Connect the main device’s HDMI OUT port to the HDMI IN on your TV. Connect microphones to the MIC inputs.

Check the power adaptor and cable to ensure they are properly connected and functioning.

Check the source device and disable any mute settings.

To resolve harsh or distorted sound, try the following solutions:

• Reduce the source volume.

• Change the placement angle between the microphone and the speaker.

• Change the distance between the microphone and the speaker.

If the equipment causes interference, which can be determined by turning the equipment off and on, you are encouraged to try correcting the problem by one or more of the following measures:

• Increasing the distance between the radio/TV equipment and the main device.

• Connecting the radio/TV equipment to an outlet on a different circuit than the one into which the receiver is plugged.

• If necessary, consulting the dealer or an experienced radio/TV technician for help.

When connecting the main device to audio equipment, use only high-quality, shielded cables such as what is supplied with this product. Follow all installation instructions and do not modify the equipment in any way, as this could void your FCC authorization to use the device in the U.S.

Main Unit Parameters:

• HDMI input and output: HDMI 1.4

• THD: 0.5%

• Signal/Noise ratio: -90dB

• Frequency response: 30Hz~18kHz ±3dB

• Operating range: Over 100ft

• Typical Tone control: ±15dB @ 10kHz

• Microphone max. Gain: +26dB

• Wired microphone input impedance: 22kΩ

• Stereo line input impedance: 10kΩ

• Power: 5V DC

UHF Wireless Microphone Parameters:

• Wireless frequency range: UHF

• Transmitting Power: 10dBm

• Modulation: FM

• Max Modulation: 75 KHz

• Spurious Emission: >60dB

• Power Supply: 3V (2 ‘AA’ Batteries)

Main Unit Parameters:

• HDMI input and output: HDMI 1.4

• THD: 0.5%

• Signal/Noise ratio: -90dB

• Frequency response: 30Hz~18kHz ±3dB

• Typical Tone control: ±15dB @ 10kHz

• Microphone max. Gain: +26dB

• Wired microphone input impedance: 22kΩ

• Stereo line input impedance: 10kΩ

• Power: 5V DC

Wired Microphone Parameters:

• Mic Element: Dynamic

• Directivity: Uni-directivity

• Frequency Response: 60-15KHz

• Sensitivity: -75dB±3dB

• Impedance: 600Ω