OLIGHT BATON 4 PREMIUM EDITION TI (01) PDF Document

The following items are included with your OLIGHT BATON 4 PREMIUM EDITION TI:

• Wireless Charger

• Baton 4 Flashlight

• USB-C Charging Cable

• Lanyard with a Pin Tool

• Cleaning Cloth

• User Manual

Common Specifications:

• CCT: 5700~7000K CRI:70

• Max Output: 1,300 lumens

• Battery: Customized 650mAh 3.6V IMR 16340 Rechargeable Battery

• Candela: 6,889cd

• Beam Distance: 166m

• Impact Resistance: 1.5m

• Cable Length: 20cm

• Type: USB-C

• How to Charge the Wireless Charger: Fully charge the wireless charger before its first use. Connect the charger to an external USB power source through the provided USB-C charging cable. The screen will display the charging status.

The wireless charger for the OLIGHT BATON 4 PREMIUM EDITION TI includes the following components:

• A slot for the Baton 4 flashlight.

• A button for operation.

• A digital display indicator.

• A Type-C charging port.

Before the first use, open the lid of the wireless charger and remove the insulating film located between the flashlight and the case. After removing the film, close the lid to begin charging the flashlight.

To charge the wireless charger, connect it to an external USB power source using the provided USB-C charging cable. The digital display on the charger will show “IN” and the current battery percentage to indicate that it is charging. The display will constantly be on during the charging process.

Place the OLIGHT BATON 4 PREMIUM EDITION TI flashlight into the wireless charger and close the lid. The indicator on the flashlight will turn red to indicate charging is in progress and green when it is fully charged.

Yes, the wireless charger can be used as a power bank to charge external devices. Connect your device to the charger’s Type-C port. The display will show “OUT” and the remaining battery level of the charger. The display will automatically turn off after about 10 seconds. You can single-press the button to reactivate the display. The flashlight will turn off when the charger is discharging and the light is on, but this feature is incompatible with S1RII/Baton 3.

To turn the flashlight on or off, single-press the side switch. When the light is turned on, it will return to the previously selected brightness level (Turbo mode is memorized as High mode; Strobe mode cannot be memorized).

When the flashlight is on, press and hold the side switch. The flashlight will cycle through Low, Medium, and High modes, starting from the present brightness level. Release the switch to select the desired brightness level.

When the flashlight is off, press and hold the side switch for 1 to 2 seconds to enter Moonlight mode.

Quickly double-press the side switch to enter Turbo mode. Double-press again to return to the previous mode.

Quickly triple-press the side switch to enter Strobe mode. To exit this mode, single press or press and hold the switch.

To lock the flashlight, turn it off, then press and hold the side switch for over 2 seconds. The light will enter Moonlight mode and then turn off, indicating it is locked.

To unlock, press and hold the side switch for over 1 second until the Moonlight mode turns on.

Yes. When the flashlight is on, double-press and hold the side switch to access the timer setting. One blink indicates a 3-minute timer, and two blinks indicate a 9-minute timer. The flashlight will automatically turn off when the timer is up. After the timer is set, you can double-press and hold the side switch to change the timer settings. The previous timer setting will be used when you set the timer again.

The flashlight has a brightness level indicator next to the side switch, which shows High, Medium, or Low settings. The wireless charger has a battery level indicator:

• Green: > 60% battery

• Orange: 10% – 60% battery

• Red: < 10% battery

When the charger’s battery level is below 10%, the display will blink 10 times to notify you. Additionally, the button indicator on the charger is positioned on the top of the display and will be constantly red when the display is turned off.

You can control the flashlight using the button on the wireless charger when the lid is open:

• **Turn ON/OFF:** Single press the button on the charger to turn the flashlight on or off.

• **Activate Moonlight Mode:** Press and hold the button for 1 to 2 seconds.

• **Change Brightness:** When the flashlight is on, press and hold the button to cycle through Low, Medium, and High brightness levels. Release the button to select a level.

• **Turn off the light:** Simply close the lid of the wireless charger to turn the flashlight off. Note: This feature is incompatible with S1RII/Baton 3.