FREE ENGLISH NOKIA 5160 (01) PDF USER GUIDE
FREE ENGLISH NOKIA 5160 (01) PDF USER MANUAL
FREE ENGLISH NOKIA 5160 (01) PDF OWNER GUIDE
FREE ENGLISH NOKIA 5160 (01) PDF OWNER MANUAL
FREE ENGLISH NOKIA 5160 (01) PDF REFERENCE GUIDE
FREE ENGLISH NOKIA 5160 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH NOKIA 5160 (01) PDF REFERENCE MANUAL
FREE ENGLISH NOKIA 5160 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH NOKIA 5160 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD NOKIA 5160 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
NOKIA 5160 (01) PDF SUMMARY:
How do you turn the keyguard off?
Press Unlock, then press.
How do you switch between letter cases when entering text?
Press the key to switch between upper-case and lower-case letters.
How do you switch to numbers when entering letters?
Press and hold the key.
How do you switch to special characters when entering letters?
Press the key.
How do you select a character in “special character” mode?
Select a character, then press Use.
How do you attach the battery?
Place the battery on the back of the phone and slide it toward the top of the phone until it clicks into place.
How do you charge the battery?
Connect the lead from the charger to the bottom of the phone or to a charging stand, then plug the charger into a standard wall outlet.
What does the battery strength indicator look like while charging?
The battery strength indicator on the right side of the display scrolls.
What does it mean if your phone displays “Not charging, charging is suspended”?
Check that the battery is connected to an approved charging device. If the battery is very hot or cold, wait for a while.
What should you not do with the antenna?
Do not attempt to extend or remove the fixed-length antenna. Also, do not touch the antenna unnecessarily.
Where can you find the latest version of the Owner’s Manual?
The latest version of the Owner’s Manual may be found on Nokia’s World Wide Web site at http://www.nokia.com.
Where can you access the Nokia Interactive Owner’s Manual?
Go to http://www.nokiahowto.com to access the Nokia Interactive Owner’s Manual.
When is charging complete?
When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if you leave your phone connected to the charger.
When is a good time to charge?
You can charge anytime, but remember that when your phone displays Battery low, you only have a couple of minutes of talk time left.
Can I make calls while charging?
Yes, but depending on the charger used, your battery may not charge during a call.
How do you discharge NiMH batteries for good operation times?
Discharge NiMH batteries from time to time by leaving your phone switched on until it turns itself off or by using the battery discharge facility of any approved accessory available for your phone. Do not attempt to discharge the battery by any other means.
How do you remove the battery?
- Switch off the phone before removing the battery!
- Press and hold the button at the top of the battery.
- Slide the battery toward the bottom of the phone.
- Lift the battery off the phone.
What is important to know about a new battery?
A new battery’s full performance is achieved only after two or three complete charge and discharge cycles.
How many times can a battery be charged and discharged?
The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
What kind of batteries and chargers should be used?
Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.
What should you do when a charger is not in use?
When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.
(NiMH batteries only) How should you discharge the battery for good operation times?
For good operation times, discharge the battery from time to time by leaving your phone switched on until it turns itself off or by using the battery discharge facility of any approved accessory available for your phone. Do not attempt to discharge the battery by any other means.
What can affect the ability of your battery to charge?
Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first.
What should you use the battery for?
Use the battery only for its intended purpose.
What should you never use?
Never use any charger or battery which is damaged or worn out.
What should you not do to the battery?
Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and – terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.
What reduces the capacity and lifetime of the battery?
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).
How should you dispose of batteries?
- Do not dispose of batteries in a fire!
- Dispose of used batteries in accordance with any local regulations.
What can you use the power key for?
- turn the phone on or off (press and hold)
- turn the phone’s lights on for 15 seconds
- select a quick alert setting (if Keyguard is off and the phone is not connected to a headset or handsfree car kit)
- silence the ringing of an incoming call
How do you use the Navi™ key?
The Navi™ key appears below the display. Its current function is indicated by the word that appears above it (for example, Menu). Simply press the Navi™ key to perform the function. Throughout this guide, when you see “press Menu,” “press Listen,” etc., press the Navi™ key when that word appears above it.
How do you use the scroll keys?
Use the scroll keys to:
- browse menus
- move the cursor to the right or the left
- adjust the earpiece volume while in a call
- access your phone book (press from the start screen)
- access the dialed calls list (press from the start screen)
How do you use the clear key?
Use the clear key to:
- delete a character to the left of the cursor
- clear all characters from the display (press and hold)
- return to the previous menu level
- return from the menu to the start screen (press and hold)
- access the in-call menu while in a call
How do you turn your phone’s lights on for 15 seconds?
- if Keyguard is off, press any key
- if Keyguard is on, you must press the key briefly (this conserves battery power by keeping the lights from turning on when the phone is in a pocket or purse)
What is the start screen?
The start screen appears when you first turn on your phone. Menu appears above the Navi™ key so you can access your phone’s menu. Several features can be used only when the phone is at the start screen.
How do you get to the start screen?
To get to the start screen, press and hold for a second. (If there are characters on the display this clears the characters, then you must press and hold again.)
How do you use the scroll bar in the menu?
When you use your phone’s menu, a scroll bar appears at the far right of the screen. This bar indicates where you are in the menu; each tab location on the bar represents a different menu item.
How do you view help text in the menu?
To view the help text, scroll to the menu item and wait for about 10 seconds for the text to appear. Press More or to see the next page of text, to see the previous page, or to return to the menu.
How do you use menu shortcuts?
When you select a menu item, numbers appear on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different menu items. For example, to access the Phone settings menu, you can simply press Menu 4 2. The phone displays the first item in that menu, Touch tones.
What are the Menu items in the phone?
- Phone book
- 11 Search
- 12 Add new
- 13 Edit
- 14 Erase
- 141 One by one
- 142 Erase all
- 15 Options
- 151 Scrolling view
- 152 Memory status
- 16 1-touch dialing
- Messages
- 21 Text messages
- 211 Inbox
- 212 Saved
- 215 Erase all
- 22 Voice messages
- 221 Listen to voice messages
- 222 Voice mailbox number
- 23 Welcome note
- 21 Text messages
- Call log
- 31 Missed calls
- 32 Received calls
- 33 Dialed calls
- 34 Clear call lists
- 341 All
- 342 Missed
- 343 Received
- 344 Dialed
- 35 Call timers
- 351 Last call
- 352 All calls
- 353 Life timer
- 354 Clear timers
- Settings
- 41 Call settings
- 411 Emergency key 9
- 412 Automatic redial
- 413 Calling card
- 414 Automatic answer
- 42 Phone settings
- 421 Touch tones
- 422 Language
- 423 Restore factory settings
- 424 Lights
- 43 Security settings
- 431 Restrict calls
- 432 Access codes
- 44 Network services
- 441 Voice privacy
- 442 Network feature setting
- 443 Call forwarding
- 444 Call waiting
- 445 Send own number
- 45 NAM selection
- 41 Call settings
- System
- 51 Automatic
- 52 Manual
- 53 New search
- Games
- 61 Memory
- 62 Snake
- 63 Logic
- Clock
- 71 Alarm clock
- 72 Clock settings
- 721 Display/Hide clock
- 722 Adjust time
- 723 Time format
- My tones
- 81 Ringing options
- 811 Ring
- 812 Ascending
- 813 Ring once
- 814 Beep once
- 815 Silent
- 82 Ringing tone
- 83 Ringing volume
- 831 Level 1
- 832 Level 2
- 833 Level 3
- 834 Level 4
- 835 Level 5
- 84 Message alert tone
- 841 No tone
- 842 Standard
- 843 Special
- 844 Beep once
- 845 Long & loud
- 85 Keypad tones
- 851 Off
- 852 Level 1
- 853 Level 2
- 854 Level 3
- 86 Warning and game tones
- 861 On
- 862 Off
- 87 Vibrating alert
- 871 On
- 872 Off
- 81 Ringing options
- Keyguard
- Visible only when used with car kit
- Visible only when used with headset or car kit
- Must be added to the menu manually; see ‘Network feature setting’ on page 27
- Visible only when vibrating battery is attached
How do you enter letters and numbers?
The cursor is a blinking vertical line that appears on the screen when you are entering text or numbers. Characters you enter appear to the right of the cursor. Pressing the key deletes the character to the left of the cursor. Use the scroll keys to move the cursor to the right or left. When your phone is ready for you to enter text, such as a name or message, it switches to ABC mode. The icon shows that it is in ABC mode.
How do you change letter case?
Press the key to switch between upper- and lower-case letters. The icon switches to to indicate that you are using lower case.
How do you enter numbers while in ABC mode?
To enter numbers while in ABC mode, you can:
- press and hold the corresponding key until the number appears, or
- switch between ABC mode and number mode by pressing and holding the key.
What are the key characters?
| Key | Characters |
|---|---|
| 1 | . , ‘ ? ! – 1 |
| 2 | ABC2 |
| 3 | DEF3 |
| 4 | GHI4 |
| 5 | JKL5 |
| 6 | MNO6 |
| 7 | PQRS7 |
| 8 | TUV8 |
| 9 | WXYZ9 |
| 0 | space, 0 |
| See ‘Special characters in names’ on page 12. Changes letter case, switches between letters and numbers |
How do you enter special characters in names?
In ABC mode you can press the key to view the special characters below. You can use these characters when saving names in your phone book. Simply press or to highlight the one you want, then press Use. . , ? ! : ; – + # * ( ) ‘ “ _ @ & $ % / < > ¿ ¡ = Tip: To choose a character that appears near the end of the list, immediately press to go to the end of the list.
How do you enter special characters in phone numbers?
When entering numbers, press the key repeatedly until you see the character you want.
What is the use of the special characters in phone numbers?
| Character | Use |
|---|---|
| * | This character is used to request services from the network. Contact your service provider for details. |
| + | This character is not currently used. |
| p | This character creates a pause. Digits to the right of the p are sent as touch tones after a 2.5-second pause. Use this character to save phone numbers of automated services that require you to enter a password or other information after the call is answered. For example, if your voice mail number at work is 555-1212 and you need to enter your extension (1234) and then a password (5678) in order to listen to your messages, you could save this phone number as 5551212p1234p5678. |
| w | This character creates a wait. It works similarly to the pause character except that digits to the right of the w are not sent until you press Send. |
What does the Keyguard feature do?
The Keyguard feature allows you to “lock” your phone’s keypad so that accidental keypresses have no effect. This is handy when your phone is in a pocket or purse. Note: Keyguard is not a security feature and will not prevent unauthorized use of your phone.
How do you lock the keys using Keyguard?
Press Menu 9 or Menu .
How do you unlock the keys using Keyguard?
Press Unlock .
What are some notes about Keyguard?
- When Keyguard is on, the only way to answer a call is to press Answer.
- When Keyguard is on, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). However, one-touch emergency dialing (‘emergency key 9’) does not operate.
- Keyguard is automatically turned off when the phone is connected to a car kit.
How do I turn the phone on or off?
Press and hold the key for one second.
What should I do if the phone asks for a lock code or security code?
See the ‘Lock code’ or ‘Security code’ sections in the PDF.
What should I avoid when turning the phone on?
Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
What is the proper way to hold the phone?
Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.
What should I avoid touching when the phone is switched on?
Do not touch the antenna unnecessarily when the phone is switched on.
Why should I avoid touching the antenna?
Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
How can I check the signal strength?
When you are at the start screen or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators scroll as the signal strength increases and decreases.
How can I improve my phone’s reception?
Try moving your phone slightly. If you’re inside a building, move toward a window.
How do I make a call?
- Enter the area code and phone number.
- Press Call and wait for the other party to answer.
How do I adjust the earpiece volume during a call?
Press or during a call.
How do I adjust the volume of an accessory with its own loudspeaker?
If an accessory with its own loudspeaker is connected to your phone, the scroll keys will adjust the volume for that accessory.
How do I mute the microphone during a call?
Press , press Options, and select Mute.
How do I unmute the microphone during a call?
Press , press Options, and select Unmute.
How do I end a call?
Press End.
How do I redial a number I have called recently?
- From the start screen, press to access the dialed calls list.
- Scroll to the desired number.
- Press Call.
How do I find a name and number in my phone book?
- Press to access your phone book.
- Scroll to the number you want. (To skip ahead quickly in the list, press the number key that corresponds to the first letter of the name.)
- Press Call.
How do I answer a call?
When someone calls, the phone will alert you and Call will flash on the display. To answer the call, press any key except .
What should I do if I accidentally press the answer key while my phone is in my pocket or purse?
The phone will not answer the call if you press the key for longer than one second.
How do I silence an incoming call?
To silence the ringing of an incoming call, press briefly.
How do I turn automatic redial on or off?
Use Menu 4 1 2 to turn this feature on or off.
What does the automatic redial feature do?
When this feature is on and the wireless network is busy, your phone will redial a number up to three times. This feature will not redial to a busy phone number.
How do I stop the call attempts when using the automatic redial feature?
Press Quit or .
How do I save calling card information?
- Press Menu 4 1 3.
- Scroll to the desired calling card, then press Options.
- Scroll to Edit, then press OK.
- Enter your security code, then press OK.
- At Dialing sequence, press Select. Press to choose the dialing sequence your card uses, then press Select.
- Enter access number, then press OK.
- Enter your card number and/or PIN, then press OK. Your phone will display Save changes? Press OK.
- Press to reach Card name, then press Select. Enter the card name using your phone’s keypad, then press OK.
How do I choose a calling card to use?
To select a calling card to use, press Menu 4 1 3, scroll to the card you want, then press Options. Select is highlighted; press OK. Enter your security code, then press OK.
What are the dialing sequences that the phone supports for calling cards?
- Access no. + phone no. + card no.
- Dial 1-800 access number, then phone number, then card number (+ PIN if required)
- Access no. + card no. + phone no.
- Dial 1-800 access number, then card number (+ PIN if required), then phone number
- Prefix + phone no. + card no.
- Dial the prefix (any numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required)
How do I set the clock’s format to 24-hour or am/pm?
Use Menu 7 2 3 to set the clock’s format.
How do I set the time?
Use Menu 7 2 2 to enter the current time. Use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clock’s time format is set to am/pm, you will be asked to choose am or pm.
How do I display or hide the clock?
Press Menu 7 2 1 to display the clock on the phone’s screen if it is currently hidden, or vice versa.
How do I set the language of my phone’s display?
Use Menu 4 2 2 to set the language of your phone’s display.
What languages can I choose from?
English, French, Spanish, and Portuguese.
What is the shortcut for choosing English?
Press Menu 4 2 2 1.
How do I set my phone’s lights when using a car kit?
Use Menu 4 2 4 to set your phone’s lights to On (lights stay on) or Automatic (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.).
How do I change the sound settings in my phone?
Use Menu 8, My tones, to change the six sound settings in your phone: ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning and game tones.
How do I set the phone to notify me that I have a call?
Use Menu 8 1 to tell your phone how to notify you that you have a call.
What are the ringing options available?
- Ring: The phone rings normally using the currently selected ringing tone.
- Ascending: The phone rings using the currently selected ringing tone. The ringing volume starts low and increases with successive rings.
- Ring once: The phone rings once using the currently selected ringing tone.
- Beep once: The phone beeps once.
- Silent: The phone makes no sound when you receive a call. The icon appears at the start screen.
How do I choose a ringing tone?
Use Menu 8 2 to choose one of 30 ringing tones. Scroll to a tone to hear how it sounds.
How do I control the volume of my phone’s ringing and of message alert tones?
Use Menu 8 3 to control the volume.
How do I choose the tone played when I receive a text message?
Use Menu 8 4 to choose the tone played when you receive a text message. Scroll to a tone to hear how it sounds.
How do I adjust the volume of the tones my phone makes when I press its keys?
Use Menu 8 5 to adjust the volume of the tones.
How do I turn my phone’s warning and game tones on or off?
Use Menu 8 6 to turn your phone’s warning and game tones on or off.
How do I set my phone to vibrate when I receive a voice call?
If your phone has a vibrating battery attached, use Menu 8 7 to set your phone to vibrate when you receive a voice call. If you turn vibrating alert on, your phone will vibrate even if its ringing option is set to Silent.
How do I quickly adjust my phone’s sound settings?
Briefly press the key, scroll to the setting you want, then press OK.
What quick alert settings can I choose from?
- My tones: Uses the settings you have made in Menu 8, My tones.
- Silent: All sound is turned off.
- Quiet: Your phone beeps once when you receive a call or text message. Other tones are turned off.
- Loud: Your phone rings loudly. Other tones are not affected.
- Headset: Automatically selected when your phone is connected to a headset. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a headset.
- Car: Automatically selected when your phone is connected to a car kit. Remembers any changes you make to settings in Menu 8, My tones, and uses them the next time you connect the phone to a car kit.
How do I save my voice mailbox number?
Use Menu 2 2 2 to save the voice mailbox number given to you by your service provider. This number may be up to 32 digits long.
How do I dial my voice mailbox after saving the number?
Once you save your voice mailbox number, you can press and hold the key to dial your voice mailbox. You can also press briefly and then press Call.
How do I turn voice privacy on or off?
Use Menu 4 4 1 to turn voice privacy on or off.
What happens if voice privacy becomes inactive?
If voice privacy becomes inactive, the phone beeps and displays Voice privacy not active.
How do I create or change the welcome note for my phone?
Use Menu 2 3 to create or change the welcome note for your phone.
How do I save the welcome note?
To save the note, press Options, then Save.
How do I erase the welcome note?
To erase the note, press Options, then Erase.
How do I make an emergency call if the phone is off?
- Switch the phone on.
- Press and hold the key for several seconds to ready the phone for calls.
- Key in the emergency number for your present location.
- Press Call.
What should I do when making an emergency call?
Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so.
How do I turn on the Emergency Key 9 feature?
Use Menu 4 1 1 to turn on this feature.
How do I make an emergency call using the Emergency Key 9 feature?
- Press and hold the 9 key, or
- Press 9, then press Call.
How do I make an emergency call when Keyguard is active?
Dial the emergency number, then press Call.
How do I save a feature activation code?
- Press Menu 4 4 2.
- At the Feature code: prompt, enter the feature activation code, then press OK.
- Scroll to the feature that the code applies to, then press Select.
- If the feature is call forwarding, choose one of the four types of call forwarding.
- Scroll to Activate, then press OK. Activate will now appear in the menu for that feature.
How do I save a feature cancellation code?
- Press Menu 4 4 2.
- At the Feature code: prompt, enter the feature cancellation code, then press OK.
- Scroll to the feature that the code applies to, then press Select.
- If the feature is call forwarding, choose one of the four types of call forwarding.
- Scroll to Cancel, then press OK. Cancel will now appear in the menu for that feature.
How do I access the in-call menu?
Press while you are in a call, then press Options. Press to scroll to the first item in the menu, or to scroll to the last item in the menu.
How do I make a new outgoing call while already in a call?
Select New call from the in-call menu. Enter the number (or press Search to locate the number in the phone book), then press Call. The first call is automatically put on hold while you are in your new call.
How do I create a three-way call?
- Call the first person.
- Select New call from the in-call menu.
- Enter or find the phone number of the second person, press OK and then press Call. The first person is put on hold.
- After the second person answers, choose Connect all from the in-call menu.
What options are in the in-call menu?
- Answer
- Swap
- End
- New call
- Connect all
- Phone book
- Menu
- Touch tones
- Mute/End
How do I end a call?
Press End or select End from the in-call menu.
How do I answer a waiting call?
If you are in a call with someone and another person calls you, the function of the Navi™ Key changes from End to Options. Press Options. The in-call menu appears with Answer selected. Press OK.
How do I swap between two calls?
When you are in a call and you receive an indication of a waiting call, select Answer from the in-call menu. Your first call will be put on hold. To swap back to the first call, select Swap from the in-call menu.
How do I cancel call waiting before making a call using the standard method?
- Dial the code for cancelling call waiting followed by the phone number you want to call.
- Press Call.
How do I cancel call waiting using the menu method?
You can save the code for cancelling call waiting given by your service provider and then use Menu 4 4 4 2 to cancel call waiting. See ‘Adding feature cancellation codes to the menu’ on page 27.
How do I activate call forwarding using the standard method?
- Dial the code for activating call forwarding followed by the phone number to which you want to forward your calls.
- Press Call.
How do I activate call forwarding using the menu method?
You can save the code for activating call forwarding and then use the menu to activate call forwarding. See ‘Adding feature activation codes to the menu’ on page 27.
How do I cancel call forwarding using the standard method?
- Dial the code for cancelling call forwarding.
- Press Call.
How do I cancel call forwarding using the menu method?
You can save the code for cancelling call forwarding and then use the menu to cancel call forwarding. See ‘Adding feature cancellation codes to the menu’ on page 27.
How do I use 1-touch dialing?
Once you have assigned a phone number to a number key (2 through 8), you can press and hold that key to dial the number. You can also press the number key briefly and then press Call.
How do I assign a number to a key for 1-touch dialing?
- Press Menu 1 6.
- Scroll to the desired key, then press Assign.
- Press or to choose the name you want to assign to the selected key, then press Select.
How do I change or erase a number assigned to a key for 1-touch dialing?
If a key already has a number assigned to it, you can press Options and then view, change, or erase the number assignment.
How do I make a call using one-touch dialing?
Press and hold a number key (2 through 8) for a few seconds to call the number assigned to it. You can also enter the number of the 1-touch dialing key (for example, 2) and press Call.
How do I select a NAM?
Use Menu 4 5 to select a NAM.
How do I hide my phone number using the standard method?
- Dial the feature code followed by the number you want to call.
- Press Call.
How do I hide my phone number using the menu method?
You can save the feature code given by your service provider so that Send own number appears in your phone’s menu, and then use Menu 4 4 5 to use this feature. See ‘Network feature setting’ on page 27. This feature must be activated before each call.
How do I make a call using a calling card?
- Enter the phone number, including any prefix that your calling card may require.
- Press and hold Call for a few seconds until your phone displays Card call.
- Your phone displays Wait for tone, then press OK. Wait for the tone, then press OK.
- Your phone displays Wait for tone, press OK again. Wait for the tone again, then press OK.
How do I choose a system selection for my phone?
This feature is Menu 5 in your phone. The default is Automatic.
How do I choose Manual system selection?
If you choose Manual, your phone displays a list of available and unavailable networks. Scroll through the choices and press OK when you reach the one you want.
How do I start a New Search for a system?
If you choose New Search, your phone begins a new search for new private and residential systems. When it finds the best new system, it displays it. You can then select it or start another search by pressing Next.
How do you switch from a private to a public system?
If you are in a private system and want access to a public system, press and hold Menu when you are not in a call. Your phone will display Search public systems? Press OK and your phone will use the public system for the next outgoing call. After the call it will revert to Automatic system selection.
How do you turn on/off automatic answer?
Use Menu 4 1 4 to turn the automatic answer feature on or off. When automatic answer is turned on, your phone answers incoming voice calls after one ring. This feature is only available when your phone is connected to a headset or to an approved handsfree car kit equipped with the ignition sense option, with the ignition on.
How do you set the manual touch tone length?
Use Menu 4 2 1 1 to set the length of touch tones created when you press a key.
What are the options for setting the manual touch tone length?
- Continuous means the tone sounds for as long as you press and hold the key.
- Fixed sets the tone length to one tenth of a second, regardless of how long you press and hold the key.
- Off turns off touch tones. No tones will be sent when you press the keys.
How do you set the automatic touch tone length?
Use Menu 4 2 1 2 to set the length of touch tones sent automatically by the phone to Short (one tenth of a second) or Long (half a second).
How do you send touch tone strings?
- During a call, press **to clear any numbers from the display.
- Press Options.
- Scroll to Touch tones, then press OK.
- Enter or find the touch tone string, then press OK.
How do you restore factory settings?
You can use Menu 4 2 3 to reset many of the settings in your phone to their factory defaults (as in a new phone). You will be required to enter the security code.
What is not affected when restoring factory settings?
The phone book, language setting, call timers, security code, and lock code are not affected.
How do you save names and numbers?
Enter the phone number, press or , then press Save. Enter a name if you wish, then press OK. Each name may consist of up to 16 characters and each phone number may consist of up to 32 characters.
How do you save a number quickly?
To save a number quickly, enter the phone number, press or , then press and hold Save. The number is saved to your phone book and you can add a name to it later.
How do you save a name and number while in a call?
- Press .
- Press Options.
- Scroll to Phone book, then press OK.
- Scroll to Add new, then press Select.
- Enter a name if you like, then press OK.
- Enter the phone number, then press OK.
What happens if you try to save a name that already exists?
If you try to save a name that already exists in memory, the phone asks if you want to replace the existing name.
What happens if you try to save a phone number and your phone book is full?
If you try to save a phone number and your phone book is full, you are given the option to replace an existing entry. Scroll to the entry you want to replace and press OK, or press to cancel.
How do you find names and numbers from the start screen?
Press to access your phone book, then scroll to the desired name/number. You can also press the number key that corresponds to the first letter of the name. The first matching entry is displayed at the top of the screen.
How do you find names and numbers using the Phone book menu?
Press Menu 1 1, enter the first few letters of the name, then press OK. Your phone displays the first matching entry at the top of the screen.
How do you access your phone book when prompted to enter a phone number?
Press Search to access your phone book.
How do you edit phone book entries?
To edit phone book entries, press Menu 1 3, scroll to the entry you want to edit, then press Edit. Edit the name and number as needed.
How do you erase names and numbers from your phone book?
Use Menu 1 4 to erase entries from your phone book. One by one lets you select one entry at a time to be erased. Erase all erases your entire phone book (you will be required to enter your security code first).
How do you choose a scrolling view for your phone book?
Use Menu 1 5 1 to choose a scrolling view for your phone book (Name list, Name+number, or Name only).
How do you view the phone number associated with a name when the scrolling view is set to Name list or Name only?
Press and hold the key.
How do you check available memory in the phone book?
Use Menu 1 5 2 to see how many memory locations are free and how many are being used. (Each memory location holds one phone number and associated name).
What options are available when you access Missed calls, Received calls, or Dialed calls and press Options?
- Call dials the number.
- Call time shows the time of the last call.
- Edit number allows you to edit the number.
- Save allows you to enter a name for the number, edit the number if needed, and save both to your phone book.
- Erase erases the number from the call list.
- View number displays the associated phone number if only the name is currently displayed.
How do you view the missed calls list when the display says “Missed calls”?
Press List. If you have missed more than one call, you can scroll through the list of numbers. To dial the displayed number, press Options, then choose Call.
How do you view the missed calls list at any time?
Use Menu 3 1 to view the missed calls list at any time. To dial a number, press Options, then choose Call.
How do you view the received calls list?
Use Menu 3 2 to view the received calls list. To dial a number, press Options, then choose Call.
How do you access the dialed calls list from the start screen?
Press to access the dialed calls list. Scroll to the desired number, then press Call.
How do you access the options for the dialed calls list?
Access the dialed calls list by pressing Menu 3 3.
How do you clear call lists?
Use Menu 3 4 to clear the missed, received, and/or dialed call lists.
How do you view call timers?
Use Menu 3 5 to view the various call timers.
What are the call timer options?
- Last call is the duration of the last call, or current call if applicable.
- All calls is the duration of all calls since the timers were last reset.
- Life timer displays the duration of all calls for the life of your phone and cannot be reset.
How do you set timers back to 0?
Use Menu 3 5 4 to clear call timers. You will be required to enter your security code.
How do you display the current call timer during calls?
- Press Menu 3 5 1.
- Press Details.
- Press Select.
- Scroll to On, then press OK.
How do you listen to new voice messages when your phone notifies you?
When your phone notifies you that you have a new voice message, press Listen. Your phone dials your voice mailbox number, if you have saved it.
How do you call your voice mailbox at any time?
Once you have saved your voice mailbox number, you can press and hold the key to dial your voice mailbox.
How do you read a text message?
When you receive a text message, the phone displays the indicator, either Message received or New emergency message (if an emergency message has been received), and makes a sound. To read the message, press Read. This takes you to the Inbox, with the new message selected. Press Read again. If necessary, use the scroll keys to read the entire message.
What options are available when reading messages?
- Read next allows you to read the next message.
- Erase deletes the message. Press OK to confirm the deletion (or to cancel).
- Save saves the message in the Saved folder.
- Call back calls any displayed phone number included in the message. If more than one number was included, a list of numbers is displayed. Choose one and press Call.
How do I access the Inbox?
Use Menu 2 1 1 to access the Inbox at any time.
What do the icons in front of the message headers in the Inbox indicate?
The icon indicates that a message has been read. The icon indicates that a message has not been read.
How do I access the Saved folder?
Use Menu 2 1 2 to access the Saved folder and read saved messages.
What happens when the phone’s memory is full and a new text message is received?
One or more low-priority messages that have been read will be automatically deleted from the Inbox to receive the new text message. An emergency message may cause messages to be deleted from the Saved folder.
What does the phone display when the message memory is full?
The phone will display No space: message waiting.
How do I clear the “No space: message waiting” notification?
Press OK. You should then delete one or more old messages to make room for the new message.
How do I erase all text messages?
Use Menu 2 1 5 to access the Erase all option for Text messages.
What categories of messages can be erased using the Erase all option?
- All read: Erases all read messages in the inbox.
- All in inbox: Erases all messages in the inbox.
- All saved: Erases all messages stored in the Saved folder.
- All in outbox: Erases all messages in the outbox (5160i only).
How do I write a text message?
- Press Menu 2 1 3 and select Write new.
- Write your text message by entering letters and numbers from your keypad.
- The function of the Navi™ key will change to Options.
How do I send a text message?
- Write a text message and press Options.
- To send the message, highlight Send and press OK.
- Enter the phone number (or press Search to locate the number in the phone book), then press Send.
What options are available when writing a text message?
- Send: Send the message.
- Back: Return to the Text messages menu.
- Clear screen: Clear all entered text from the screen.
- Settings: Choose a setting for your message.
- Save: Store the text message to Saved.
Where are Message settings located?
Message settings are located in the Write new options menu as Settings.
What message settings can be selected or deselected?
You may select or deselect the following settings by pressing Mark or Unmark:
- Urgent: notify recipient that your message is important.
- Read receipt: notify you that the recipient has opened your message
- Callback no.: place your phone number within the message
How are received urgent messages indicated?
Received urgent messages are indicated with an exclamation mark (!) in front of the message.
How do I access the Outbox?
Use Menu 2 1 4 to access the Outbox.
What do the icons in front of a message heading in the Outbox indicate?
The icon shows that the message was sent successfully to the text message center. The icon shows that the attempt to send the message was unsuccessful.
How do I read a message in the Outbox?
Press Read to read the selected message.
How do I forward a text message?
- Highlight the message that you want to forward.
- Press Read, then press Options.
- Scroll to Forward, press OK.
- Send the message as you normally would.
How do I reply to a text message?
- Highlight the message that you want to reply to.
- Press Read, then press Options.
- Scroll to Reply, press OK.
- Send the message as you normally would.
How do I set the alarm clock?
Use Menu 7 1 to turn the alarm clock on or off.
How do I enter the alarm time?
Use two digits for both hours and minutes (for example, enter 1:30 as 0130). If the clock’s time format is set to am/pm, you will be asked to choose am or pm.
What determines the alarm volume?
The alarm volume is determined by the current ringing volume. However, if you have manually set the ringing option to Silent or Beep once or have selected the Silent or Quiet quick alert setting, the phone only sounds a quiet beep.
How do I shut off the alarm when it sounds?
To shut off the alarm, press any key except Snooze.
What happens if I press Snooze when the alarm sounds?
The alarm sounds again in 10 minutes. To turn off the alarm before then, press Stop.
What happens if I let the alarm sound for one minute without pressing a key?
It stops for 10 minutes, then starts again.
What happens if the phone is turned off and the alarm is set?
The phone switches itself on at alarm time, then the alarm sounds.
What happens when I shut off the alarm if the phone was off?
To shut off the alarm, press any key except Snooze. The phone displays Keep the phone on? Press Yes to keep it on or to switch it off. If you press Snooze, the phone turns itself off for 10 minutes, then the alarm sounds again.
How do I access the games?
Use Menu 6 to access the games.
How do I pause a game?
Press .
How do I resume a game?
Choose Continue.
How do I play the Memory game?
Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys. Press the 5 key to reveal pictures. Once found, pairs stay visible. Press the key to jump to the right over revealed pictures or to move from the bottom right of the screen to the top left. Press the key to jump to the left over revealed pictures or to move from the top left of the screen to the bottom right.
How do I play the Snake game?
Feed the snake with as many goodies as possible and watch it grow. Use keys 2, 4, 6, and 8 to turn the snake toward food. The longer the snake’s tail grows, the higher your score. If the snake hits its own tail or the surrounding wall, the game is over.
How do I play the Logic game?
Find the secret combination of figures in a column. Possible figures are shown at the top of the display. Press the 5 key repeatedly to select a figure and the 2, 4, and 8 keys to move the cursor. Once you think you have the right combination, press the key. The result appears as a set of marks above the column. A correct figure in the right place gets a full mark; a correct figure in the wrong place gets a half mark. The game ends when the correct figures are in the right place.
How do I copy a figure from the previous column in the Logic game?
Move the cursor over it using the 2, 4, or 8 key, then press the 5 key.
How do I change the lock code?
Use Menu 4 3 2 3 to change the lock code. The default lock code is 1234.
What happens when the phone requires the lock code?
The phone displays Enter lock code:. Enter the code, then press OK.
What happens if I enter a wrong lock code five times in succession?
The phone prompts you for the security code.
How do I change the security code?
Use Menu 4 3 2 4 to change the security code. The default security code is 12345.
What happens when the phone requires the security code?
The phone displays Security code:. Enter the code, then press OK.
What happens if I enter an incorrect security code five times in succession?
The phone will not accept any input for the next five minutes.
How do I restrict incoming calls?
Choose Restrict incoming calls. Enter your security code, then press OK. Press Mark, then press . Press Yes to save this change.
How do I allow incoming calls again after restricting them?
Choose Restrict incoming calls and enter your security code. Press Unmark, then press . Press Yes to save this change.
How do I restrict outgoing calls?
You can create a list of numbers to which outgoing calls cannot be made. A call restriction can consist of an entire phone number, an area code, etc. When the restriction is selected, calls cannot be made to any number beginning with those digits.
How do I add numbers to the restricted outgoing calls list?
- Choose Restrict outgoing calls. Enter your security code, then press OK.
- Add restriction is selected. Press OK.
- Enter the phone number, area code, etc. to which you want to restrict calls, then press OK.
- Give a name of up to 10 characters to the restriction (such as Joey, Long dist, or 1-800 #s), then press OK.
How do I allow calls to a number on the restricted list?
Press Select to see your list of numbers. Press Unmark to remove the restriction. Press and then Yes to save your changes.
How do I edit or erase an entry in the restricted outgoing calls list?
Choose Edit or Erase, select the entry you want to edit or erase, and follow the instructions on the screen.
How do I lock my phone?
Press Menu 4 3 2 1. Enter the lock code, then press OK. Scroll to On, then press OK.
How do I unlock my phone?
Press Menu, enter the lock code, then press OK.
How do I answer a call when the phone is locked?
Press Answer.
How do I save an unlocked phone number?
Use Menu 4 3 2 2 to save a number that may be called even when your phone is locked. You will be required to enter the lock code.
How do I call an unlocked phone number?
Press or , or manually enter the number exactly as it is saved, then press Call.
What are some practical rules for accessory operation?
- Keep accessories out of small children’s reach.
- When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
- Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
- Installation of complex car equipment must be completed by qualified personnel only.
What should I always do when storing the phone?
Always store the phone with the cover attached.
What should I not use when changing covers?
When changing covers, don’t use the phone’s antenna as leverage.
What is the first step when changing covers?
Switch off the power and disconnect the phone from the charger or any other device.
What is the second step when changing covers?
Using a coin, depress the colored tab on the top of the phone and slide the color cover forward.
What is the third step when changing covers?
Remove the cover.
What is the fourth step when changing covers?
Remove the rubber keypad from the back of the cover. Place it into the back of the new cover.
What is the fifth step when changing covers?
Place the bottom of the cover against the bottom of the phone. Make sure all three sets of plastic tabs line up with their respective slots. Close the cover and snap it shut all the way around the edge of the phone.
What batteries are available for this phone?
- BPS-1 Ultra Slim Li-Polymer 600 mAh
- BLS-2N Extended Li-Ion 900 mAh
- BMS-2S Extended NiMH 900 mAh
- BMS-2V Vibrating NiMH 900 mAh
- BLS-4 Ultra Extended Li-Ion 1500 mAh
What are the approximate charging times for the BPS-1 Ultra Slim Li-Polymer 600 mAh battery?
- Standard Travel Charger ACP-7U: 2 hours, 30 minutes
- Rapid Travel Charger ACP-9U: 1 hour, 20 minutes
What are the approximate charging times for the BLS-2N Extended Li-Ion 900 mAh battery?
- Standard Travel Charger ACP-7U: 4 hours
- Rapid Travel Charger ACP-9U: 2 hours
What are the approximate charging times for the BLS-4 Ultra Extended Li-Ion 1500 mAh battery?
- Standard Travel Charger ACP-7U: 5 hours
- Rapid Travel Charger ACP-9U: 3 hours, 30 minutes
What is the charging time to reach 80% battery capacity?
The charging times listed in the table will charge the phone to about 80% of its capacity, and the battery strength indicator will stop scrolling.
What should I do to obtain 100% battery capacity?
Allow another two hours for “maintenance” charge.
What chargers can be used with this phone?
- Standard Travel Charger (ACP-7U)
- Rapid Travel Charger (ACP-9U)
- Rapid Mobile Charger (LCH-8)
What happens if I use other chargers or accessories?
The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous. Other usage will invalidate any approval given to this apparatus and may be dangerous.
What should I do when a charger is not in use?
When a charger is not in use, disconnect it from the power source.
How long should I leave the battery connected to a charger?
Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life.
What happens to a fully charged battery if left unused?
If left unused, a fully charged battery will discharge itself over time.
How do I use the ACP-7U Standard Travel Charger?
Plug the charger into a wall outlet and connect the connector to the bottom of your phone.
What are the approximate talk and standby times for the BPS-1 Ultra Slim Li-Polymer 600 mAh battery?
- Digital Talk Time: 1 hr, 20 min – 2 hrs, 10 min
- Analog Talk Time: 40 min – 1 hr, 15 min
- Digital Standby Time: 66 -133 hrs
- Analog Standby Time: 20 -33 hrs
What are the approximate talk and standby times for the BLS-2N Extended Li-Ion 900 mAh battery?
- Digital Talk Time: 2 hrs – 3 hrs, 15 min
- Analog Talk Time: 1 hr – 1 hr, 45 min
- Digital Standby Time: 100 -200 hrs
- Analog Standby Time: 30 -50 hrs
What are the approximate talk and standby times for the BLS-4 Ultra Extended Li-Ion 1500 mAh battery?
- Digital Talk Time: 3 – 5 hrs
- Analog Talk Time: 1 hr, 30 min – 2 hrs, 45 min
- Digital Standby Time: 170 -335 hrs
- Analog Standby Time: 50 -83 hrs
Can I make calls while charging?
Calls can be made during charging, but charging will stop for the duration of the call.
What happens if the battery is completely empty?
If the battery is completely empty, you cannot use the phone until it has enough charge to operate.
How do I use the ACP-9U Rapid Travel Charger?
Plug the charger into a wall outlet and connect the connector to the bottom of your phone.
Can I use the phone while charging with the Rapid Travel Charger?
You can use your phone while charging.
What is the voltage range for the Rapid Travel Charger?
The Rapid Travel Charger operates within a voltage range of 100V-240V AC (50Hz-60Hz).
How do I use the LCH-8 Rapid Mobile Charger?
The small charger’s functional design fits well with most car lighters and interiors.
What is the input voltage for the Rapid Mobile Charger?
The input voltage is 12 or 24 V DC, negative grounding.
What does a green light on the Rapid Mobile Charger indicate?
A green light indicates that the Rapid Mobile Charger is ready to charge.
What should I avoid doing with the Rapid Mobile Charger?
Avoid prolonged charging with the Rapid Mobile Charger when the car engine is not running because this may cause the battery of your car to drain.
What should I verify about my car’s cigarette lighter plug?
Verify that the green LED light is lit to ensure that the cigarette lighter plug is provided with power when the ignition is switched off.
How do I use the DCH-9 Compact Desktop Charging Stand?
Plug the charger into a wall outlet and connect the connector to the back of the Compact Desktop Charging Stand. Place your phone and/or a spare battery in the stand to begin battery charging.
What does the charging stand display when the phone is charging?
When the phone is charging, no lights are displayed on the stand; check the charging status of the phone battery on the phone display.
How does the charging stand work when charging a spare battery?
Charging moves to the rear slot once the front battery is 100% charged.
What do the lights on the charging stand mean when charging a spare battery?
A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity.
Does the phone need a discharge feature on the charging stand?
The phone has the built-in intelligence to maintain the battery, so there is no need for a discharge feature on the stand.
What are the charging times for the BPS-1 Ultra Slim Li-Polymer 600 mAh battery using the DCH-9 Compact Desktop Charging Stand?
- Using ACP-7U, front slot empty: 4 hours, 30 minutes
- Using ACP-7U, front slot occupied: 6 hours, 30 minutes
- Using ACP-9U, front slot empty: 3 hours
- Using ACP-9U, front slot occupied: 4 hours, 30 minutes
What are the charging times for the BLS-2N Extended Li-Ion 900 mAh battery using the DCH-9 Compact Desktop Charging Stand?
- Using ACP-7U, front slot empty: 6 hours, 30 minutes
- Using ACP-7U, front slot occupied: 8 hours, 30 minutes
- Using ACP-9U, front slot empty: 4 hours, 30 minutes
- Using ACP-9U, front slot occupied: 5 hours, 30 minutes
What are the charging times for the BLS-4 Ultra Extended Li-Ion 1500 mAh battery using the DCH-9 Compact Desktop Charging Stand?
- Using ACP-7U, front slot empty: 12 hours
- Using ACP-7U, front slot occupied: 15 hours, 45 minutes
- Using ACP-9U, front slot empty: 8 hours
- Using ACP-9U, front slot occupied: 10 hours, 30 minutes
What should I do if using a hand-held telephone while driving a vehicle?
If using a hand-held phone, park the vehicle before conversing.
Where should I secure the phone in a vehicle?
Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.
Is the use of an alert device to operate a vehicle’s lights or horn on public roads permitted?
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
What should I do when connecting the phone or any accessory to another device?
When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.
What is the recommended position for using the phone?
It is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).
What should people with pacemakers do when using the phone?
- Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on.
- Should not carry the phone in a breast pocket.
- Should use the ear opposite the pacemaker to minimize the potential for interference.
- If you have any reason to suspect that interference is taking place, switch off your phone immediately.
What should I do if my digital wireless phone interferes with my hearing aid?
In the event of such interference, you may want to consult your service provider.
What should I do regarding medical devices and cellular phones?
Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so.
What should I do about my vehicle and RF signals?
Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.
What should I do in facilities with posted notices?
Switch your phone off in any facility where posted notices so require.
What should I do in potentially explosive atmospheres?
Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions.
What areas are considered to have a potentially explosive atmosphere?
They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
Who should service the phone or install it in a vehicle?
Only qualified personnel should service the phone, or install the phone in a vehicle.
What should I check regularly about wireless phone equipment in my vehicle?
Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
What should I NOT store or carry in the same compartment as the phone, its parts or accessories?
Flammable liquids, gases, or explosive materials.
What should I remember about vehicles equipped with an air bag?
An air bag inflates with great force. Do not place objects, including installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
What should I do before boarding an aircraft?
Switch off your phone.
Why should I switch off my phone before boarding an aircraft?
The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.
What may happen if I do not observe the phone’s instructions?
Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.
Can I rely solely upon a wireless phone for essential communications such as medical emergencies?
No. This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user- programmed functions which cannot guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications.
What must be true to make or receive any calls?
The phone must be switched on and in a service area with adequate signal strength.
When may emergency calls not be possible?
Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.
How do I make an emergency call?
- If the phone is not on, switch it on.
- Press and hold the key for several seconds to ready the phone for calls.
- Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location.
- Press Call.
What should I do if certain features are in use (Keyguard, call restrictions, etc.) when making an emergency call?
You may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.
What should I remember when making an emergency call?
Give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident – do not cut off the call until given permission to do so.
What does the acronym “SAR” stand for?
Specific Absorption Rate.
What is the SAR limit set by the FCC?
The SAR limit set by the FCC is 1.6 W/kg.
How are SAR tests conducted?
Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Is the actual SAR level of the phone while operating always at the maximum value?
No, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
What must be done before a phone model is available for sale to the public?
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure.
What is the highest SAR value for this model phone when tested for use at the ear?
The highest SAR value for this model phone when tested for use at the ear is 1.46 W/kg.
Where can I find SAR information on this model phone?
SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJPNSW-1NX.
What is the SAR limit for mobile phones used by the public in the United States and Canada?
The SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
What should I do to fulfill any warranty obligations and allow me to enjoy the product for many years?
- Keep it and all its parts and accessories out of small children’s reach.
- Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
- Do not use or store it in dusty, dirty areas as its moving parts can be damaged.
- Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
- Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone’s electronic circuit boards.
- Do not attempt to open it. Non-expert handling of the device may damage it.
- Do not drop, knock or shake it. Rough handling can break internal circuit boards.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.
- Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.
- Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.
- If the phone, battery, charger, or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.
What is the phone’s transmitting power?
Up to 600 mW nominal.
What is the phone’s operating voltage?
3.6 V nominal.
What are the phone’s frequency bands?
lowband 824.04 – 848.97 MHz (TX) 869.04 – 893.97 MHz (RX) highband 1850.04 – 1909.92 MHz (TX) 1930.08 – 1989.96 MHz (RX)
How many channels does the phone have?
832 lowband 1997 highband
How many NAMs does the phone have?
2
How many memory locations does the phone have?
100
What is the memory capacity of the phone?
16 characters per name 32 characters per number
What does Nokia’s One-Year Limited Warranty cover?
Nokia warrants that this cellular phone is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions.
How long does the limited warranty for the Product extend?
The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product.
Who does the limited warranty extend to?
The limited warranty extends to the original purchaser of the Product and is not assignable or transferable to any subsequent purchaser/end-user.
Where does the limited warranty extend to?
The limited warranty extends only to Consumers who purchase the Product in the United States.
What will Nokia do during the limited warranty period?
Nokia will repair, or replace, at Nokia’s option, any defective parts, or any parts that will not properly operate for their intended use with new or factory rebuilt replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts.
What does the limited warranty NOT cover?
The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts.
What is Nokia’s limit of liability under the limited warranty?
Nokia’s limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage.
What is the Consumer required to do to prove the date of the original purchase of the Product?
Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.
Who bears the cost of shipping the Product to Nokia?
The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida.
Who bears the cost of shipping the Product back to the Consumer?
Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
When does the Consumer have no coverage or benefits under this limited warranty?
- The Product has been subject to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping.
- The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by Nokia.
- Nokia was not advised by the Consumer in writing of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.
- The Product serial number plate or the accessory data code has been removed, defaced or altered.
- The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna.
What step-by-step procedure should the Consumer follow if a problem develops during the limited warranty period?
- The Consumer shall return the Product to the place of purchase for repair or replacement processing.
- If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc. Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL. 32901
- The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.
- The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
- Nokia will repair or authorize the repair of the Product under the limited warranty within 30 days after receipt of the Product by Nokia or an Nokia authorized service center. If Nokia cannot perform repair covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage.
- If the Product is returned to Nokia during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned to Nokia after the expiration of the limited warranty period, Nokia’s normal service policies shall apply and the Consumer will be responsible for all shipping charges.
What may the Product consist of?
The Product consists of newly assembled equipment that may contain used components that have been reprocessed to allow machine compliance with Product performance and reliability specifications.
What is the limitation on any implied warranty of merchantability, or fitness for a particular purpose or use?
Any implied warranty of merchantability, or fitness for a particular purpose or use, shall be limited to the duration of the foregoing limited written warranty.
What is the Consumer’s sole and exclusive remedy in regards to warranties?
The foregoing limited warranty is the Consumer’s sole and exclusive remedy and is in lieu of all other warranties, express or implied.
Is Nokia liable for special, incidental or consequential damages?
Nokia shall not be liable for special, incidental or consequential damages, including but not limited to, loss of anticipated benefits or profits, loss of savings or revenue, punitive damages, loss of use of the product or any associated equipment, cost of capital, cost of any substitute equipment or facilities, downtime, the claims of any third parties, including customers, and injury to property, resulting from the purchase or use of the product or arising from breach of the warranty, breach of contract, negligence, strict tort, or any other legal or equitable theory, even if Nokia knew of the likelihood of such damages. Nokia shall not be liable for delay in rendering service under the limited warranty, or loss of use during the period that the Product is being repaired.
What should I do if I have questions concerning the limited warranty?
Questions concerning this limited warranty may be directed to: Nokia Customer Care Center, USA Nokia Inc. 7725 Woodland Center Boulevard, Suite #150 Tampa, FL 33614 Telephone: 1-888-NOKIA2U (1-888-665-4228) Facsimile: (813) 249-9619 TTY Users: 1-800-24NOKIA (1-800-246-6542)
What is the limited warranty period for Nokia supplied attachments and accessories?
The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
CLICK HERE TO DOWNLOAD NOKIA 5160 (01) PDF MANUAL