LELO TIANI HARMONY (01) PDF Document

Your LELO TIANI HARMONY is locked for transportation. To unlock it, simply connect the charger to the device.

The LELO TIANI HARMONY should only be used by people aged 18 years and over. Persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge should only use the product if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Minors shall not play with, clean, or use the product unsupervised.

The LELO TIANI HARMONY is a Dual Action Couples Massager with the following parts:

• Vibrator head (for contact with skin)

• Vibrator tail (for contact with skin)

• ON/OFF/Mode Selection Button

• Charging Port

Before the first use, charge your LELO TIANI HARMONY for 2 hours.

1. Press the (()) button to turn it on.

2. The LED lights will blink, showing the battery level.

3. The LED lights will go steady, showing the vibration level.

4. Press the (()) button to switch between the modes. The modes will be set to 100% intensity.

5. To turn it off, press the center button for 3 seconds.

1. Before the first use, charge your LELO TIANI HARMONY for 2 hours.

2. Download the LELO app for your iOS or Android device.

3. To turn on your device and activate Bluetooth, press the (()) button for 3 seconds. All the LED lights will blink simultaneously to show it is in Bluetooth pairing mode.

4. Open the LELO app and locate the toy icon on the bottom of the screen. Find your TIANI Harmony and select “Connect”.

5. Press and hold the button on your device. Confirm the connection by pressing the button on your product again.

6. Go to “MY LELO TOYS” and select “PLAY”.

7. You can choose between three different control modes.

8. Select “SETTINGS” to configure four additional modes.

9. To save your settings for offline use, select “SAVE” at the bottom of your screen.

10. Use the drop-down menu to set the default auto power off time from 10-20 minutes. You can also check the battery level in the upper left corner of the app.

To charge your LELO TIANI HARMONY:

1. Insert the DC plug into the DC port at the base of your device.

2. Insert the main plug into a USB Port.

The LED on the interface indicates the charging status:

• Pulsing light: The device is charging.

• Steady glow: The device is fully charged.

• Blinking white light: The battery is running low.

Only use original chargers provided by LELO with your TIANI Harmony.

Cleaning:

Always clean your LELO TIANI HARMONY thoroughly before and after each use. The device is fully waterproof.

• You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

• Alternatively, you can rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Storage:

• Avoid leaving your device in direct sunlight and never expose it to extreme heat.

• Store your LELO TIANI HARMONY in a dust-free place and keep it away from products made of other materials.

To maintain the integrity of your LELO TIANI HARMONY, avoid the following:

• Lubricants: Using hand creams or silicone-based lubricants may make the silicone permanently tacky.

• Cleaners: Never use cleansers containing alcohol, petrol, or acetone.

If the LED on your LELO TIANI HARMONY does not pulse when the charger is connected, try the following:

• The battery may be completely drained and will require several minutes to acknowledge that it is being charged. Wait a few minutes.

• The charger may not be properly connected. Check the wall and DC sockets to ensure a secure connection.

If your LELO TIANI HARMONY does not activate when the center button is pressed, the battery is likely empty. Please recharge your device.

MATERIALS: PC+ABS, Body-safe silicone

BATTERY: Li-Ion 3.7 V 200 mAh

CHARGING: 2 hours at 5.0 V 200 mA

USER TIME: Up to 2 hours

STANDBY TIME: Up to 90 days

FREQUENCY: Vibration motor 1: 208 Hz, Vibration motor 2: 161 Hz

MAX. NOISE LEVEL: < 60 dB

INTERFACE: Single Button

CARRIER FREQUENCY: 2.4 GHz