Free English JBL GRIP (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JBL GRIP (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with the JBL GRIP?
The box for the JBL GRIP contains the speaker and a Quick Start Guide.
How do I pair my JBL GRIP with a Bluetooth device?
1. Press the power button to turn on your JBL GRIP. It will automatically enter pairing mode.
2. On your smartphone or tablet, go to Bluetooth settings and select “JBL GRIP” from the list of available devices to connect.
How do I control music playback on my JBL GRIP?
You can use the buttons on the JBL GRIP to control your music:
Play/Pause: Press the play button once.
Volume Up: Press the ‘+’ button.
Volume Down: Press the ‘-‘ button.
Next Track: Press the play button twice.
Previous Track: Press the play button three times.
How can I connect multiple JBL GRIP speakers together?
To use the multispeaker connection feature, simply turn on all the JBL GRIP speakers you wish to link. They will automatically connect with each other.
Can I customize the settings and lighting on my JBL GRIP?
Yes, you can use the JBL PORTABLE app for speaker configuration, software upgrades, and to access light show presets and more customization options for your JBL GRIP.
How do I charge my JBL GRIP and check the battery status?
The JBL GRIP will indicate when the battery is low. To charge it, connect a USB-C cable to the charging port. A light will indicate that it is charging. When the light becomes solid, the battery is fully charged. Please be aware that a USB cable is not included with the product.
How do I perform a factory reset on my JBL GRIP?
To restore your JBL GRIP to its factory default settings, press and hold the designated buttons for more than 10 seconds.
Is the JBL GRIP waterproof and dustproof?
Yes, the JBL GRIP has an IP68 rating, which means it is certified as both waterproof and dustproof.
What should I do if the charging port on my JBL GRIP gets wet?
The JBL GRIP is equipped with charging protection. If the USB-C connector detects water, salt, or other chemicals, a warning sound will alert you to unplug the cable. To protect the battery’s lifespan, wait until the speaker and connector are completely dry before attempting to charge it again.
How can I prolong the battery lifespan of my JBL GRIP?
To prolong the battery lifespan of your JBL GRIP, fully charge it at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
What are the technical specifications for the JBL GRIP?
| Transducer: | 45 mm / 1.75” |
| Output power: | 4.2 W RMS |
| Frequency response: | 90 Hz – 20 kHz |
| Signal-to-noise ratio: | > 85 dB |
| Battery type: | Li-ion polymer 3.23 Wh (equivalent to 3.8 V / 850 mAh) |
| Battery charge time: | 3 hours (5 V ⎓ 1 A) |
| Music play time: | up to 7 hours (dependent on volume level and audio content) |
| Bluetooth® version: | 5.3 |
| Bluetooth® profile: | A2DP 1.4, AVRCP 1.6 |
| Bluetooth® transmitter frequency range: | 2400 MHz – 2483.5 MHz |
| Bluetooth® transmitter power: | ≤ 9 dBm (EIRP) |
| Bluetooth® transmitter modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Product dimensions (W x H x D): | 94.3 x 75.7 x 42.2 mm / 3.7 x 3.0 x 1.7” |
| Net weight: | 0.223 kg / 7.16 lbs |
| Maximum operation temperature: | 45 °C |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD JBL GRIP (01) PDF DOCUMENT