IMG STAGE LINE HSE-86 (01) PDF MANUAL

The electret headband microphone HSE-86 is ideally suited for vocal sound and speech applications which require much freedom of movement, e. g. for telephone services, on stage, for sports activities. It can be connected to an audio unit with a 3.5 mm jack for electret microphones, e. g. to the following pocket transmitters from “img Stage Line”:

TXS-820LT, TXS-822LT

TXS-820SX, TXS-822SX

In addition, the microphone may also be connected to the microphone input of a PC.

The microphone corresponds to all required directives of the EU and is therefore marked with CE.

● The microphone is suitable for indoor use only.

● Protect it against humidity and heat (admissible ambient temperature range 0 – 40 °C).

● For cleaning only use a dry, soft cloth, never use chemicals or water.

If the microphone is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.

1) Place the anti-pop protection supplied onto the microphone. It does not only prevent the overemphasis of plosives (e. g. “b”, “p”, “t”) for vocal sound and speech applications but also protects the microphone against the humidity of the breath.

2) Slide the microphone support into the hook of the metal bracket and displace the two cable guidances at the bracket so that the microphone cable is guided along the bracket in an optimum way.

3) Put on the bracket and place the microphone into a favourable talk position.