HARMAN JBL TOUR ONE M3 SMART TX (01) PDF DOCUMENT

The HARMAN JBL TOUR ONE M3 SMART TX package includes the following items:

• Headphones

• Smart TX charging case

• USB charging cable

• Audio cable

• Flight adapter

• Carrying pouch with carabiner

To get even more control and personalization of your listening experience with the HARMAN JBL TOUR ONE M3 SMART TX, download the free JBL Headphones app from the Google Play Store or the Apple App Store.

To power on and connect your HARMAN JBL TOUR ONE M3 SMART TX headphones, follow these steps:

1. Slide the power switch up to turn the headphones on. They will automatically enter pairing mode.

2. On your source device, open the Bluetooth settings.

3. Choose “JBL Tour One M3” from the list of available devices to connect.

The headphones are compatible with Android Fast Pair (for phones running Android 6+) and Microsoft Swift Pair (for Windows 10 v1803+), which may provide a pop-up for quick connection on compatible devices.

To enter pairing mode again on your HARMAN JBL TOUR ONE M3 SMART TX headphones, slide the power switch to the bottom and hold it for 2 seconds.

The HARMAN JBL TOUR ONE M3 SMART TX can be connected using the following wired options:

• Aux cable: For connecting to devices like in-flight entertainment systems and treadmills.

• USB Type-C cable: For connecting to tablets, laptops, PCs, and Macs. The USB port supports both charging and audio transmission. For best performance, it is recommended to use the original cables.

The HARMAN JBL TOUR ONE M3 SMART TX headphones can connect to a maximum of two devices simultaneously. To set up a multi-point connection:

1. Pair and connect the headphones to your first device as usual.

2. To connect to a second device, enter pairing mode on the headphones by sliding the power switch to the bottom and holding for 2 seconds.

3. Select “JBL Tour One M3” in the Bluetooth settings of your second device.

The controls for the HARMAN JBL TOUR ONE M3 SMART TX are located on the earcups.

Left Earcup:

• Volume control buttons.

Right Earcup (Touch Panel):

• Play/Pause: Tap once.

• Next Track: Tap twice.

• Previous Track: Tap three times.

• Answer/End Call: Tap once.

• Reject Call: Press and hold for 2 seconds.

• Activate Voice Assistant (Bixby/Siri/Others): Press and hold for 2 seconds.

Ambient Sound Control Button:

• Press to cycle through ANC, Ambient Aware, and TalkThru.

Note: Enable advanced controls by connecting your HARMAN JBL TOUR ONE M3 SMART TX to the JBL Headphones app.

The smart case for the HARMAN JBL TOUR ONE M3 SMART TX has a touch screen and a physical button for control.

• Press the button once to wake the screen or navigate through different function screens.

• Swipe on the touch screen to interact with the displayed options.

The case screen allows you to manage features such as music playback, volume, and SilentNow settings directly from the case.

The Auto Play/Pause feature on the HARMAN JBL TOUR ONE M3 SMART TX automatically pauses your music when you take the headphones off and resumes playback when you put them back on. This feature can be enabled or disabled in the JBL Headphones app.

When using the HARMAN JBL TOUR ONE M3 SMART TX in wired listening mode with the power on, the following features are available:

• Active Noise Cancelling (ANC)

• Ambient Aware

• TalkThru

• Hi-Res AUDIO

Note that audio quality may vary depending on the audio source. For best performance, use the original cables.

SilentNow allows you to activate Active Noise Cancelling (ANC) without any music playing and with Bluetooth turned off, creating a quiet environment. To activate SilentNow, press the dedicated button once, then press and hold the button below it for 2 seconds.

VoiceAware lets you control the amount of your own voice that you hear during phone calls. You can adjust this feature in the JBL Headphones app, with settings for Low, Mid, and High levels.

The Smart Talk feature automatically pauses your music and activates TalkThru mode as soon as you start speaking, allowing you to have conversations without removing your headphones. This feature can be configured in the JBL Headphones app.

You can customize the Smart TX case through the JBL Headphones app. Settings you can adjust include:

• Brightness

• Lock Screen Wallpaper

• Feature Shortcuts on the case screen, such as Playback Control, Volume Control, Ambient Sound Control, Auracast, Spatial Sound, and more.

Headphones:

• A 5-minute charge provides 5 hours of playtime.

• A full charge from empty takes approximately 2 hours.

Smart TX Case:

• A 10-minute charge provides 3 hours of playtime.

• A full charge from empty takes approximately 2 hours.

For the best charging speed, turn off the headphones before charging.

• Factory Reset (Headphones): Press and hold the button on the left earcup for 5 seconds.

• Restart (Smart TX Case): Press and hold the button on the case for 10 seconds.

The LED behaviors for the headphones are as follows:

• Flashing Blue: Power on

• Quick Flashing Blue: Bluetooth connecting

• Solid Blue: Bluetooth connected

• Slow Flashing Blue: Bluetooth not connected

• Solid Red: Low battery / Charging

• LED Off (while plugged in): Fully charged

To protect the battery lifespan of your HARMAN JBL TOUR ONE M3 SMART TX, you should fully charge it at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.