Free English HARMAN JBL STAGE1 62F (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 62F (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the contents of the HARMAN JBL STAGE1 62F box?
The box for the HARMAN JBL STAGE1 62F contains the following items:
2x Speakers (A)
8x Screws (B)
8x Speed clips (C)
What are the dimensions of the HARMAN JBL STAGE1 62F speaker?
The dimensions for the HARMAN JBL STAGE1 62F speaker are as follows:
Mounting Cutout Diameter: 5-19/32″ (142.0mm)
Overall Diameter: 6-17/32″ (166.2mm)
Mounting Depth: 2-3/16″ (55.4mm)
Total Depth: 2-11/16″ (68.0mm)
What are the general specifications for the HARMAN JBL STAGE1 62F?
The specifications for the HARMAN JBL STAGE1 62F are:
Speaker: 6-1/2″ (165mm) Coaxial Car Speaker without Grille
Power Handling: 50W RMS, 400W peak
Sensitivity (@2.83V): 89dB
Frequency Response: 55Hz – 20kHz
Nominal Impedance: 4ohm
Note on Power Handling: 50W RMS refers to long-term maximum power per IEC 60268. 25W RMS refers to 100H continuous testing at rated power per IEC 60268.
What are the Thiele-Small Parameters for the HARMAN JBL STAGE1 62F?
The Thiele-Small Parameters for the HARMAN JBL STAGE1 62F are as follows:
BL (Tm): 3.097
DCR (Ohms): 3.25
Mms (g): 11.25
Sd (cm²): 132.73
Cms (um/N): 382
Vas (L): 9.515
Fs (Hz): 76.8
Qes: 1.841
Qms: 8.749
Qts: 1.521
Crossover Point: 5200Hz
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 62F (01) PDF DOCUMENT