Free English HARMAN JBL STAGE1 962M (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 962M (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the specifications of the HARMAN JBL STAGE1 962M speaker?
| Speaker | 6×9″ (152x230mm) Three-Way Car Speaker with Grille |
| Power Handling | 70W RMS, 560W peak |
| Sensitivity (@2.83V) | 91dB |
| Frequency Response | 45Hz-20kHz |
| Nominal Impedance | 4ohm |
Note on Power Handling: 70W RMS refers to long-term maximum power according to IEC 60268. 35W RMS refers to 100H continuous testing at rated power according to IEC 60268.
What are the Thiele-Small Parameters for the HARMAN JBL STAGE1 962M speaker?
| BL (Tm) | 4.048 |
| DCR (Ohms) | 3.29 |
| Mms (g) | 20.912 |
| Sd (cm²) | 239 |
| Cms (um/N) | 345 |
| Vas (L) | 27.91 |
| Fs (Hz) | 59.2 |
| Qes | 1.562 |
| Qms | 12.018 |
| Qts | 1.382 |
| Crossover Point | 4300Hz |
What comes in the box with the HARMAN JBL STAGE1 962M speaker system?
The HARMAN JBL STAGE1 962M package includes the following items:
2x Speakers with grilles
2x Adapter rings
2x Foam gaskets
8x Screws
8x Speed clips
2x Foam gasket rings
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD HARMAN JBL STAGE1 962M (01) PDF DOCUMENT