HARMAN JBL STAGE1 192T (01) PDF Document

The specifications for the HARMAN JBL STAGE1 192T are as follows:

• Speaker: 3/4″ (19mm) Edge-Driven Silk Dome Tweeter

• Power Handling: *80W RMS with Filter, 640W peak

• Sensitivity (@2.83V): 90dB

• Frequency Response: 2kHz – 20kHz

• Nominal Impedance: 4ohm

*80W RMS: Long-term maximum power refer to IEC 60268

40W RMS: 100H continuous testing at rated power refers to IEC 60268

The dimensions for the HARMAN JBL STAGE1 192T tweeter are:

• Tweeter (Flush Mount): 1-21/32″ (42mm) diameter

• Tweeter Mounting Depth: 5/8″ (15.6mm)

• Tweeter Protrusion: 3/8″ (12.1mm)

• Tweeter in Surface Mount Cup Diameter: 1-29/32″ (48.4mm)

• Tweeter in Surface Mount Cup Height: 15/16″ (23.4mm)

• Alternate Flush Mount Cup Diameter: 1-9/32″ (32.4mm)

• Alternate Flush Mount Cup Height: 5/8″ (16.2mm)

The box for the HARMAN JBL STAGE1 192T contains the following items:

• 2x Tweeters (A)

• 2x Surface Mount Cups (B)

• 2x Flush Mount Cups (C)

• 2x Wiring Harnesses with in-line filter (D)

The HARMAN JBL STAGE1 192T offers flush and surface mounting options. The installation diagram illustrates a flush mount installation.

1. Place the tweeter (A) inside the flush mount cup (B).

2. Insert the assembly into a cutout in your desired mounting surface.

3. Secure the tweeter from behind the mounting surface using the provided hardware (C).

4. Connect the wiring harness (D) to the tweeter and your audio source wiring, ensuring the positive and negative terminals are correctly matched. The harness includes an in-line filter.