Free English EVOLVEO HDO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD EVOLVEO HDO (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the performance features of the EVOLVEO HDO outdoor antenna?
The performance features of the EVOLVEO HDO outdoor antenna include:
• Receives local Full HD television, Digital television and DAB radio all digital signals.
• Built-in high gain and low noise amplifier for best UHF signals reception.
• Scientifically designed array improves reception for digital signals.
• Signal clear technology with extremely low noise circuitry.
• Receives both horizontal and vertical signals.
• Powered by an included AC/DC adaptor.
• Can be wall mounted, mast mounted, or balcony mounted.
• Adjustable wide reception angle.
• Water-proof and UV resistant housing.
What are the technical specifications of the EVOLVEO HDO outdoor antenna?
| Frequency Range: | UHF (470-790MHz) |
| Gain: | 45dB |
| Input voltage: | AC100-240V |
| Connector: | F connector female |
| Impedance: | 75Ω |
| Working Voltage: | DC5V/550mA |
What are the important notices for using the EVOLVEO HDO outdoor antenna?
• Stop using the antenna during thunderstorms and turn off the power.
• Turn off the power when the antenna is not in use.
• If it can’t receive well, place the antenna in a different position.
How do I install the EVOLVEO HDO antenna using the U-bolt?
Insert the U-bolt into the hole of the antenna bracket and then install the clamp in the U-bolt.
How do I install the EVOLVEO HDO antenna on a mast?
Place the U-bolt through the mast, adjust the antenna bracket, and fasten the screws.
How do I mount the EVOLVEO HDO antenna on a railing (balcony)?
Use the U-bolt to install the antenna bracket on the railing and fasten the screws.
How do I wall mount the EVOLVEO HDO antenna?
Drill holes and fix screws in the wall according to the hole positions on the antenna bracket. Then, attach the bracket to the wall and secure it with the screws.
How do I connect the cable to the EVOLVEO HDO antenna?
Connect the signal cable to the signal output jack of the antenna, and then fix the waterproof cap over the connections to prevent water filtration.
How do I adjust the EVOLVEO HDO antenna for the best reception?
Adjust the antenna direction until you get a good signal for a clear picture.
What is the safety instruction for the EVOLVEO HDO antenna?
Tie a rope on the antenna hole in case the antenna falls down.
How do I connect the EVOLVEO HDO antenna to a TV using a set-top box?
1. Connect the signal cable from the antenna to the signal input jack of the power supply.
2. Connect the power supply output jack to the digital receiver (set-top box).
3. Plug the power adaptor with the power supply and connect it to a power socket.
4. Finally, join the TV and the digital receiver.
How do I connect the EVOLVEO HDO antenna directly to a TV?
1. Connect the signal cable from the antenna to the signal input jack of the power supply.
2. Connect the power supply output jack to the TV.
3. Plug the power adaptor with the power supply and connect it to a power socket.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD EVOLVEO HDO (01) PDF DOCUMENT