GODOX LC1000 BI (01) PDF MANUAL

This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and attentions.

2. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.

3. This lighting product is not an ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.

4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.

6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.

7. This product is only suitable for use in -10°C to 40°C operating environment and normal humidity environment.

8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.

9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.

10. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents.

11. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.

12. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.

13. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.

14. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.

15. This product complies with ROHS, CE, and FCC certification, please refer to the relevant national standards for use and operation.

16. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice.

17. Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.

The package contains:

Light Body × 1

Barndoor × 1

Adapter × 1

Power Cord × 1

Instruction Manual × 1

Carry Bag × 1

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

Insert the top of the light stick into the slot of the barndoor. Then, the bottom of the stick light can be smoothly secured into the clamp of the barndoor.

Pull the bottom of the light stick out of the clamp and grasp the handle to slide the light stick out from top to bottom.

Press the power switch button continuously to turn the device on/off.

The product features automatic temperature detection, which activates the built-in fan for effective heat dissipation when the lamp body reaches a certain temperature. Simply press the fan button briefly to turn on or turn off the fan. When the fan is turned on, there will be no fan icon displayed above the screen. When the fan is turned off, ‘OFF’ will appear above the screen.

Note: When the fan is turned off, the brightness adjustment range is from 0% to 50%.

There are two primary modes: Dual Color Temperature Mode (CCT) and FX Mode.

Dual Color Temperature Mode

Press the MODE Button to switch to CCT (dual color temperature mode). Pressing the FN Button allows you to select CCT/brightness. After selecting an option, turn the dial to adjust CCT or brightness range. Turn the dial counterclockwise to decrease CCT/brightness by 100K/1% respectively, and turn it clockwise to increase the CCT/brightness by 100K/1% respectively. The CCT range is 2500-8500K, and the brightness range is 0%-100%.

FX Mode

Press the MODE Button to switch to FX mode. Pressing the FN Button allows you to select lighting effect/lighting effect parameters/brightness. To be specific, after selecting an option, rotate the dial to adjust the lighting effect/lighting effect parameters/brightness. Brightness Range: 0% to 100%.

There are a total of 11 lighting effects available, with specific parameters for each effect listed below:

Press the FN Button continuously to activate the P mode. The interface will appear ‘P’, and in P mode, the maximum power output at the current CCT is approximately 100W. To return to normal mode, press the FN Button continuously again. In normal mode, the power output for each CCT is approximately 50W.

Note: P mode can only be activated in dual-color temperature mode. If the fan is turned off during this mode, it will automatically exit the P mode.

Press the Bluetooth button to enter the Bluetooth setting interface. Rotate the dial clockwise to turn it on. Keep rotating until it shows RESET, and then press the FN Button to reset the Bluetooth. Rotate the dial counterclockwise to turn it off, press the Bluetooth button to exit the interface.

Note: The PD charger supports a maximum of 100W, while the QC charger supports a maximum of 18W.

Note: The below data are average values instead of absolute values. All the tests are based on the condition of 100% brightness.