FREE ENGLISH PROAIM DL-QDFW (01) PDF DOCUMENT.
FREE ENGLISH PROAIM DL-QDFW (01) PDF USER GUIDE.
FREE ENGLISH PROAIM DL-QDFW (01) PDF USER MANUAL.
FREE ENGLISH PROAIM DL-QDFW (01) PDF OWNER GUIDE.
FREE ENGLISH PROAIM DL-QDFW (01) PDF OWNER MANUAL.
FREE ENGLISH PROAIM DL-QDFW (01) PDF REFERENCE GUIDE.
FREE ENGLISH PROAIM DL-QDFW (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH PROAIM DL-QDFW (01) PDF REFERENCE MANUAL.
FREE ENGLISH PROAIM DL-QDFW (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH PROAIM DL-QDFW (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD PROAIM DL-QDFW (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I assemble the wheels and steering bars on the PROAIM DL-QDFW?
To assemble the wheels and steering bars on your PROAIM DL-QDFW, follow these steps:
1. Insert the floor wheels onto the wheel rod and tighten the nut with the provided tool to secure it.
2. To attach a steering bar, insert either the single steering bar or the dual steering bar into the dolly base and secure it properly with the provided knob(s).
Note: You can use both steering bars together for heavier setups.
How do I attach the euro adapter to the PROAIM DL-QDFW?
To attach the euro adapter to the PROAIM DL-QDFW:
1. Take out the allen bolts from the dolly platform.
2. Place the euro adapter on the platform, aligning the holes.
3. Tighten the allen bolts to secure the adapter properly.
How do I attach the optional Telescopic Bazooka to the PROAIM DL-QDFW?
To attach the Telescopic Bazooka to the PROAIM DL-QDFW, mount it on the Euro Adapter for instant height adjustment and then tighten it with the lock lever.
How do I assemble and attach the chair to the PROAIM DL-QDFW?
To assemble and attach the chair to your PROAIM DL-QDFW:
1. To mount the chair, you first need to insert the z-bracket into the dolly base.
2. Now insert the seat rod into the z-bracket and secure it with the provided knob.
3. Finally, attach the chair to the z-bracket and tighten it with the provided knob.
How do I adjust the chair on the PROAIM DL-QDFW?
The seat on the PROAIM DL-QDFW is adjustable in a forward and backward position for more comfort.
How do I attach the side boards to the PROAIM DL-QDFW?
To expand the working area on your PROAIM DL-QDFW, attach the side boards to increase the size of the platform and secure them properly.
CLICK HERE TO DOWNLOAD PROAIM DL-QDFW (01) PDF DOCUMENT