GASGAS EC 300 2022 (01) PDF Document

GASGAS EC 300 2022 (01) Image

Free English GASGAS EC 300 2022 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD GASGAS EC 300 2022 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What is the intended use of the GASGAS EC 300 2022?

The GASGAS EC 300 2022 has been designed and built to withstand the normal stresses and strains of racing. It complies with the currently valid regulations and categories of the top international motorsports organizations.

This vehicle is only authorized for operation on public roads in the homologated (restricted) version. The derestricted version of this vehicle must only be operated in closed-off areas away from public highway traffic. This vehicle is designed for use in offroad endurance competition, and not primarily for use in motocross.

What are the guidelines for safe operation of the GASGAS EC 300 2022?

To operate your GASGAS EC 300 2022 safely, please adhere to the following guidelines:

Rider Fitness: Do not operate the vehicle if you are not fit to ride due to alcohol, drugs, or medication. Do not operate the vehicle if you are physically or mentally impaired.

Exhaust Fumes: Exhaust gases are toxic. Always ensure there is sufficient ventilation when running the engine. Use effective exhaust extraction when starting or running the engine in an enclosed space.

Risk of Burns: Some components like the exhaust system, radiator, engine, shock absorber, or brake system become very hot. Do not touch these parts until they have cooled down.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a safe and environmentally compatible manner. The vehicle should only be used by trained persons with an appropriate driver’s license for public roads. Have any malfunctions that impair safety immediately eliminated by an authorized workshop.

What protective clothing is recommended when riding the GASGAS EC 300 2022?

Missing or poor protective clothing presents an increased safety risk. For your own safety, it is recommended that you only operate the vehicle while wearing appropriate protective clothing. This includes:

• Helmet

• Boots

• Gloves

• Trousers and a jacket with protectors on all rides.

Always wear protective clothing that is in good condition and meets the legal regulations.

Where are the serial numbers located on the GASGAS EC 300 2022?

The serial numbers on your GASGAS EC 300 2022 are located as follows:

• Vehicle Identification Number (VIN): Stamped on the right side of the steering head.

• Type Label: Fixed to the front of the steering head.

• Key Number (All EU models): Stamped onto the key connector for the steering lock.

• Engine Number: Located on the left side of the engine over the engine sprocket.

• Fork Part Number: Stamped on the inside of the axle clamp.

• Shock Absorber Article Number: Stamped on the top of the shock absorber above the adjusting ring towards the engine side.

How do the controls on the handlebar of the GASGAS EC 300 2022 function?

The handlebar controls on your GASGAS EC 300 2022 operate as follows:

• Stop Button (All models): Located on the left side of the handlebar. In its basic position, the ignition circuit is closed, and the engine can be started. When pressed, the ignition circuit is interrupted, a running engine stops, and a non-running engine will not start.

• Horn Button (All EU models): Located on the left side. The horn is operated when the button is pressed.

• Light Switch (All EU models): Located on the left side. The central position switches on the low beam and tail light. Turned to the left, it switches on the high beam and tail light.

• Light Switch (All US models): Located to the left of the combination instrument. Pressed in up to the stop, the light is off. Pulled out to the stop, the low beam and tail light are on.

• Turn Signal Switch (All EU models): Located on the left side. The central position is off. Turned to the left for the left signal, and to the right for the right signal.

• Emergency OFF Switch (All EU models): Located on the right side of the handlebar. In the “Ignition off” position, the ignition circuit is interrupted. In the “Ignition on” position, the circuit is closed and the engine can be started.

• Start Button: Located on the right side. When pressed, the starter motor is actuated.

What do the indicator lamps on my GASGAS EC 300 2022 mean?

The indicator lamps provide important information about your GASGAS EC 300 2022:

Lamp/Symbol Meaning (All EU models) Meaning (All US models)
High Beam Indicator Lights up blue – The high beam is switched on. Inoperative
Malfunction Indicator Lamp (MIL) Lights up/flashes yellow – The On-Board Diagnostics (OBD) has detected an error in the vehicle electronics. Come safely to a halt and contact an authorized workshop.
Fuel Level Warning Lamp Lights up yellow – The fuel level has reached the reserve mark.
Oil Level Warning Lamp Lights up red – The oil level has reached the MIN marking. Ride for no more than until the remaining fuel in the tank is depleted and refuel with 2-stroke oil at the next opportunity.
Turn Signal Indicator Lamp Flashes green – The turn signal is switched on. N/A

How do I open and close the fuel and 2-stroke oil tank caps on my GASGAS EC 300 2022?

Opening and Closing the Fuel Tank Filler Cap:

1. To Open: Press the release button, turn the fuel tank filler cap counterclockwise, and lift it off.

2. To Close: Mount the fuel tank filler cap and turn it clockwise until the release button engages. Ensure the fuel tank breather hose is routed without kinks.

Opening and Closing the 2-Stroke Oil Tank Cap:

1. To Open: Fold the loop upward. Turn the 2-stroke oil tank cap counterclockwise and pull it up.

2. To Close: Put the 2-stroke oil tank cap on and turn it clockwise. Fold the loop down until the cap engages.

How do I use the cold start button on my GASGAS EC 300 2022?

The cold start button is located on the side of the throttle valve body. It helps the engine burn the increased fuel quantity during a cold start by supplying additional oxygen.

• To Activate: Pull the cold start button out all the way and turn it by a ¼ turn.

• To Deactivate: A further ¼ turn returns the cold start button back to its basic position.

If the engine is warm, the cold start button must be deactivated.

How do I lock and unlock the steering on my GASGAS EC 300 2022 (EU model)?

The steering lock is fitted on the left side of the steering head.

To Lock the Steering:

1. Park the vehicle on a firm and level surface.

2. Turn the handlebar as far as possible to the right.

3. Insert the key for the steering lock into the lock, turn it to the left, press it in, and turn it to the right.

4. Pull out the key for the steering lock. Steering is no longer possible.

To Unlock the Steering:

1. Insert the key for the steering lock into the lock, turn it to the left, pull it out, and turn it to the right.

2. Pull out the key for the steering lock. The handlebar can now be moved again.

Never leave the key for the steering lock in the steering lock.