Free English DYSON AM07 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DYSON AM07 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I assemble the DYSON AM07?
To assemble your DYSON AM07, please follow these steps:
Step 1. Align the arrows on the base components. Then twist clockwise until it clicks and locks.
Step 2. Lower the loop amplifier onto the base, making sure to align the arrows. Once aligned, turn the loop amplifier clockwise to lock it into place.
Is there a precaution I should take with the blue tape when assembling my DYSON AM07?
Yes, do not allow the machine to twist at the blue tape. Allowing the machine to twist at the blue tape may result in accidental damage. You should remove the blue tape once the machine is fully assembled.
What should I do after I have finished assembling my DYSON AM07?
It is important to remove the clear film from the unit after assembly is complete.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD DYSON AM07 (01) PDF DOCUMENT