Free English DJI OSMO MOBILE 7P (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DJI OSMO MOBILE 7P (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up the DJI OSMO MOBILE 7P for first use?
Step 1. Attach the magnetic phone clamp to the center of your phone. Ensure the home icon on the clamp is oriented towards your phone’s camera.
Step 2. Unfold the gimbal by rotating the arm until it clicks into its operational position. Then, extend the built-in tripod legs at the base of the handle for stability.
Step 3. Magnetically attach the phone clamp to the gimbal. Make sure the white dots on the clamp and the gimbal motor are aligned.
Step 4. Turn on Bluetooth on your smartphone and connect to the device named “OM7P-xxxxxx” from your list of available devices.
Step 5. Download and open the DJI Mimo App and follow the on-screen instructions for activation and use.
How do I use the DJI OM Multifunctional Module with the DJI OSMO MOBILE 7P?
The DJI OM Multifunctional Module attaches magnetically to the DJI OM 7 Series Magnetic Phone Clamp. After attaching the module, you can open your phone’s camera app to begin using its features.
How do I use gesture controls and the trigger to operate the DJI OSMO MOBILE 7P?
Gesture Control for Photos/Videos:
To initiate a photo or video recording, stand in front of the camera and make a “peace” sign (V gesture). This will start a 3-second countdown before capture.
Gesture Control for ActiveTrack:
To turn the ActiveTrack feature ON or OFF, hold up an open palm gesture in front of the camera for 1 second.
Trigger for ActiveTrack:
Alternatively, you can press the trigger button once to turn ActiveTrack ON or OFF.
How do I power off and fold the DJI OSMO MOBILE 7P for storage?
Step 1. To power off the device, press and hold the Power/M button for 2 seconds.
Step 2. Fold the gimbal arm back into its storage position until it is secure.
Step 3. Retract the built-in tripod legs back into the handle.
How do I use the built-in extension rod on the DJI OSMO MOBILE 7P?
To use the extension rod, hold the gimbal handle and pull the upper section, where the phone is mounted, away from the handle. Extend it to your desired length.
How do I charge the DJI OSMO MOBILE 7P?
To charge the DJI OSMO MOBILE 7P, connect a USB-C cable to the charging port located on the handle and plug the other end of the cable into a suitable power source.
What are the main components and controls of the DJI OSMO MOBILE 7P?
1. DJI OM 7 Series Magnetic Phone Clamp
2. Pan Motor
3. Status Panel
4. Side Wheel
5. Joystick
6. 1/4″-20 UNC Port
7. Switch Button
8. Shutter/Record Button
9. Power/M Button
10. Tilt Motor
11. Roll Motor
12. Trigger
13. Charging Port (USB-C)
14. Built-in Tripod
15. DJI OM Multifunctional Module
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD DJI OSMO MOBILE 7P (02) PDF DOCUMENT