Free English CASIO CELVIANO AP-300GB (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CASIO CELVIANO AP-300GB (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I prepare the power supply for my CASIO CELVIANO AP-300GB?
Use the AC adaptor (AD-E24250LW) supplied with the Digital Piano. Connect in the following order:
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor to the power supply terminal (DC 24V) on the bottom of the instrument.
3. Plug the power cord into a household wall outlet.
Important safety notes for the CASIO CELVIANO AP-300GB:
– Never connect the supplied AC adaptor and power cord to any other device.
– Turn the power off before unplugging or plugging in the AC adaptor.
– Unplug the adaptor from the power outlet when not using the piano for a long period of time.
How do I turn the power on and off on the CASIO CELVIANO AP-300GB?
To turn the power on, press the Power button. Each touch button will blink while the instrument is starting up. When all buttons are lit, the piano is ready for use. Use the volume knob to adjust the sound level.
To turn the power off, press and hold the Power button for about 2 seconds. The instrument will enter standby mode.
The CASIO CELVIANO AP-300GB features an Auto Power Off function that automatically turns off the power after approximately 20 minutes of inactivity to prevent unnecessary power consumption.
How do I properly open and close the keyboard cover of the CASIO CELVIANO AP-300GB?
To open the cover: Place both hands in the recess of the keyboard cover, lift it up slightly, and push it back until it is fully open.
To close the cover: Place both hands in the recess of the keyboard cover and slowly pull it toward you until it is completely closed.
Warning: Be careful not to get hands or fingers caught when opening or closing. Do not play with the keyboard cover partially open, and do not place objects on the cover.
How do I select different grand piano tones on the CASIO CELVIANO AP-300GB?
The CASIO CELVIANO AP-300GB has several built-in grand piano tones. You can select them using the following methods:
1. Direct Selection: Hold down the GRAND PIANO button and press one of the keys from G3 to C#5.
2. Sequential Selection: Hold down the GRAND PIANO button and press the B2 key to select the previous tone or the C3 key to select the next tone.
Refer to the table below for grand piano tone characteristics:
| Tone Name | Characteristic |
|---|---|
| GRAND PIANO CONCERT | A full concert grand piano tone with dynamic and natural tone changes. |
| GRAND PIANO BRIGHT | A bright and clear piano tone. |
| GRAND PIANO MELLOW | A warm and calm piano tone. |
How do I layer two tones (Layer) on the CASIO CELVIANO AP-300GB?
The Layer feature allows you to have two tones sounding simultaneously. The first tone is called Upper1 and the second is Upper2.
1. To turn Layer on or off: Hold down the GRAND PIANO button and press the C7 key.
2. To select the Upper2 part tone: Ensure Layer is on, then hold down the GRAND PIANO button and press one of the G3 to C5 keys to select the desired second tone.
How do I use the Split function to play bass notes on the CASIO CELVIANO AP-300GB?
The Split function divides the keyboard into a Lower part (left side) and an Upper1 part (right side).
1. Hold down the GRAND PIANO button and press the C#5 key (BASS) to assign the BASS tone to the left side of the keyboard.
2. The right side will remain the previously selected tone.
3. Selecting any tone other than the BASS tone while in this mode will cancel the split state.
How do I use the Duet function for two-person performance on the CASIO CELVIANO AP-300GB?
Duet mode splits the keyboard into left and right sides with the same pitch range. To activate it, hold down the FUNCTION button and press the F2 key.
| Setting Value | Notification Tone | Setting Details |
|---|---|---|
| Off | Tone for Off | Turns off Duet. |
| On | 1 notification tone | Turns on Duet. |
| Pan | 2 notification tones | The left keyboard sound outputs from the left speaker only; the right keyboard sound outputs from the right speaker only. |
Note: When Duet is set to Pan, certain effects like Acoustic Simulator and Chorus are unavailable.
How do I use the metronome and set the tempo on the CASIO CELVIANO AP-300GB?
To start or stop the metronome, touch the METRONOME button.
To set the beat: Hold down the METRONOME button and press a key from C#3 to Bb3. C#3 turns the bell off (click only), while D3 through Bb3 set 1 to 9 beats per bar.
To set the tempo, use one of these methods while holding the METRONOME button:
1. Numerical Entry: Use keys A0 to F#1 to input a value from 20 to 255 beats per minute.
2. Increment/Decrement: Press B2 (tempo -) or C3 (tempo +).
3. Tap Tempo: Tap the Bb2 key two or more times at the desired speed.
4. Tempo Markings: Press keys C2 to Ab2 to select standard markings (Largo, Moderato, Presto, etc.).
How do I apply and adjust Sound Mode effects on the CASIO CELVIANO AP-300GB?
Touch the SOUND MODE button to toggle Hall Simulator/Reverb and Surround effects on or off. Indicators above the button show the current status.
To select a Hall Simulator or Reverb preset: Hold down the SOUND MODE button and press a key from A0 to E1.
| Key | Type | Setting Details |
|---|---|---|
| A0 | N.Y. Club | Music club in Manhattan |
| Bb0 | Opera Hall | Uniquely shaped Sydney concert hall |
| B0 | Berlin Hall | Classical concert hall in Berlin |
| C1 | British Stadium | Large outdoor stadium |
| C#1 | Room | Reverb giving a sense of a room |
| E1 | Stadium | Reverb emulating a stadium space |
How do I adjust the touch sensitivity on the CASIO CELVIANO AP-300GB?
The Touch Response function allows the volume to change based on how hard you press the keys. To change sensitivity, hold down the GRAND PIANO button and press a key from Eb1 to Ab1:
– Eb1: Off (Constant volume regardless of speed).
– E1: 1 (Light – easiest to produce loud sounds).
– F1: 2 (Medium light).
– F#1: 3 (Normal – standard setting).
– G1: 4 (Medium heavy).
– Ab1: 5 (Heavy – hardest to produce loud sounds).
How do I use the MIDI Recorder on the CASIO CELVIANO AP-300GB?
The MIDI Recorder stores keyboard performances in the internal memory.
1. Touch the REC button (it will blink red for standby).
2. Recording begins automatically when you start playing. The button will stay lit red.
3. Touch the REC button again to stop recording.
4. Touch the Play/Stop button to listen to your recording.
Note: One song can be recorded at a time; starting a new recording erases the previous one. The capacity is approximately 10,000 notes.
How do I record my performance to a USB flash drive as audio on the CASIO CELVIANO AP-300GB?
First, ensure a FAT32 or exFAT formatted USB drive is inserted into the USB Type A port.
1. Hold FUNCTION and press C4 to switch to Audio Recorder mode.
2. Touch the REC button (it will blink red).
3. Start playing to begin recording. The REC button will stay lit red.
4. Touch the REC button again to stop. The file is saved as a WAV file (linear PCM, 16 bit, 44.1 kHz, stereo) in the AUDIOREC folder.
5. Maximum recording time is approximately 25 minutes per file.
How do I pair a Bluetooth audio device with the CASIO CELVIANO AP-300GB?
1. Insert the supplied Wireless MIDI and audio adaptor into the USB Type A port.
2. Hold down the FUNCTION button and press the C#1 key. The Power button will flash blue to indicate pairing standby.
3. On your smart device’s Bluetooth settings, select “WU-BT10 AUDIO”.
4. Once connected, a notification tone will sound and the Power button will light up blue.
How do I perform a Factory Reset on the CASIO CELVIANO AP-300GB?
A factory reset returns all settings and internal data to their original factory defaults.
1. Press and hold the FUNCTION button.
2. Press the A0 key. The FUNCTION button will blink.
3. Press the C1 key (Execute) to start the process.
4. Wait until the process is complete and all touch buttons light up again.
What should I do if the touch buttons on my CASIO CELVIANO AP-300GB are not responding?
Possible causes and solutions:
– Cause: Touching with gloved fingers or a stylus. Solution: Touch the buttons firmly with bare fingers only.
– Cause: Sensitivity is set too low. Solution: To reset sensitivity to high, turn off the power, then while pressing the C8 key (rightmost key), press the Power button. Do not release C8 until the buttons start to blink.
– Note: After 15 seconds of no operation, the panel lights go off. Touch the panel once to relight the buttons.
How do I troubleshoot no sound being produced when keys are pressed on the CASIO CELVIANO AP-300GB?
Check the following if no sound is heard:
1. Volume Knob: Ensure the volume is not turned all the way down.
2. Headphones: Unplug any headphones or conversion plugs from the PHONES/OUTPUT jacks.
3. Local Control: Ensure [Local Control] is set to On. Hold FUNCTION and press F6 to toggle.
4. Speaker Out: Ensure [Speaker Out] is set to On or Auto. Hold FUNCTION and press Eb7 to adjust.
CLICK HERE TO DOWNLOAD CASIO CELVIANO AP-300GB (01) PDF DOCUMENT