Free English CASIO CELVIANO AP-S200BN (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CASIO CELVIANO AP-S200BN (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I prepare the power supply for the CASIO CELVIANO AP-S200BN?
To prepare the power supply, use only the AC adaptor supplied with the CASIO CELVIANO AP-S200BN (Model: AD-E24250LW).
Step 1. Plug the power cord into the AC adaptor.
Step 2. Connect the AC adaptor to the power supply terminal (DC 24V) on the bottom of the piano.
Step 3. Plug the power cord into a household wall outlet.
Important safety notes: Never connect the AC adaptor and power cord supplied with this instrument to any other device. Be sure to turn the power off before unplugging or plugging in the AC adaptor. Unplug the AC adaptor from the outlet when not using the digital piano for a long period of time.
How do I turn the power on or off on the CASIO CELVIANO AP-S200BN?
To turn the power on: Press the Power button. Each touch button will blink while the digital piano is starting up. When all touch buttons are lit, the instrument is ready for use. Once the power is on, use the volume knob to adjust the level.
To turn the power off: Press and hold the Power button for about 2 seconds.
Auto Power Off Function: To prevent unnecessary power consumption, the CASIO CELVIANO AP-S200BN automatically turns off after approximately 20 minutes of inactivity.
Power On Alert: After approximately 6 minutes without any operation, the Grand Piano button will flash to indicate that the power is still on. Touching a button or pressing a key will return the piano to its normal state.
What are the characteristics of the Grand Piano tones on the CASIO CELVIANO AP-S200BN?
The CASIO CELVIANO AP-S200BN features three primary grand piano tones:
| Tone Name | Characteristic |
|---|---|
| GRAND PIANO CONCERT | A full concert grand piano tone with dynamic and natural tone changes. |
| GRAND PIANO BRIGHT | A bright and clear piano tone. |
| GRAND PIANO MELLOW | A warm and calm piano tone. |
How do I select a single tone on the CASIO CELVIANO AP-S200BN?
There are three ways to select tones on the CASIO CELVIANO AP-S200BN:
Method 1 (Grand Piano Concert): Touch the Grand Piano button to immediately select the Grand Piano Concert tone.
Method 2 (Specific Key): Hold down the Grand Piano button and press a key from G3 to C#5 to select a specific tone assigned to that key.
Method 3 (Sequential): Hold down the Grand Piano button and press the B2 key to select the previous tone or the C3 key to select the next tone in the list.
What is the full Tone List for the CASIO CELVIANO AP-S200BN?
The following tones are available on the CASIO CELVIANO AP-S200BN:
| Timbre Name | Selection Key Name |
|---|---|
| GRAND PIANO CONCERT | G3 |
| GRAND PIANO BRIGHT | Ab3 |
| GRAND PIANO MELLOW | A3 |
| ROCK PIANO | Bb3 |
| JAZZ PIANO | B3 |
| BALLAD PIANO | C4 |
| ELEC.PIANO | C#4 |
| 60’S E.PIANO | D4 |
| DIGITAL E.PIANO 1 | Eb4 |
| DIGITAL E.PIANO 2 | E4 |
| HARPSICHORD | F4 |
| VIBRAPHONE | F#4 |
| STRINGS 1 | G4 |
| STRINGS 2 | Ab4 |
| PIPE ORGAN | A4 |
| JAZZ ORGAN | Bb4 |
| ELEC.ORGAN 1 | B4 |
| ELEC.ORGAN 2 | C5 |
| BASS (LOWER) | C#5 |
How do I layer two tones on the CASIO CELVIANO AP-S200BN?
The CASIO CELVIANO AP-S200BN allows you to layer two tones (Upper1 part and Upper2 part) simultaneously.
Step 1. Hold down the Grand Piano button and press the C7 key to turn the Layer function on.
Step 2. To select the Upper2 part tone, ensure Layer is on, then hold down the Grand Piano button and press a key from G3 to C5.
Note: The tone selected when Layer is off serves as the Upper1 part tone.
How do I split the keyboard for bass notes on the CASIO CELVIANO AP-S200BN?
To split the keyboard and assign a bass tone to the left side (Lower Part) of the CASIO CELVIANO AP-S200BN:
Step 1. Hold down the Grand Piano button.
Step 2. Press the C#5 key (BASS). This will assign the BASS tone to the left side of the keyboard while the right side (Upper1 Part) remains as the previously selected tone.
Step 3. To cancel the split state, select any tone other than the BASS tone.
How do I use the Duet function on the CASIO CELVIANO AP-S200BN?
The Duet function splits the keyboard into left and right sides with the same pitch range for two people to play. To operate this on the CASIO CELVIANO AP-S200BN:
Step 1. Hold down the Function button and press the F2 key (Duet Mode).
Step 2. Repeatedly press the key to toggle through the settings:
Off: Disables Duet mode.
On: Turns on Duet mode.
Pan: The left keyboard sound outputs from the left speaker only, and the right keyboard sound outputs from the right speaker only.
In Duet mode, the pedals function differently: the left pedal is the damper for the left side, the right pedal is the damper for the right side, and the center pedal is the damper for both sides.
How do I use the Metronome on the CASIO CELVIANO AP-S200BN?
To turn the metronome on or off, touch the Metronome button on the CASIO CELVIANO AP-S200BN.
To set the beat: Hold down the Metronome button and press a key from C#3 to Bb3. The settings are as follows:
| Key | Setting Value | Details |
|---|---|---|
| C#3 | Off | Only a click sounds on each beat. |
| D3 | 1 | A bell tone sounds on each beat. |
| Eb3 to Bb3 | 2 to 9 | Sets the number of beats per bar. A bell tone sounds on the first beat, and clicks sound on the remaining beats. |
How do I adjust the tempo on the CASIO CELVIANO AP-S200BN?
The CASIO CELVIANO AP-S200BN provides several ways to set the tempo (range 20 to 255 bpm):
Numerical Input: Hold the Metronome button and use keys A0 to F#1 (acting as digits 0-9) to enter a specific value.
Incremental Adjustment: Hold the Metronome button and press B2 (tempo -) or C3 (tempo +) to change the value by 1.
Tempo Markings: Hold the Metronome button and press a key from C2 to Ab2 to select a preset marking like Largo (46), Andante (72), or Allegro (132).
Tap Tempo: Hold the Metronome button and tap the Bb2 key two or more times to set the tempo based on the speed of your taps.
How do I adjust the Sound Mode Effects on the CASIO CELVIANO AP-S200BN?
To manage Hall Simulator/Reverb and Surround effects on the CASIO CELVIANO AP-S200BN:
Toggle Effects: Touch the Sound Mode button to cycle through combinations of turning Hall Simulator/Reverb and Surround on or off.
Select Presets: Hold the Sound Mode button and press keys A0 through E1 to select a specific Hall Simulator (e.g., N.Y. Club, Opera Hall) or Reverb type (e.g., Room, Stadium).
Adjust Depth: Hold the Sound Mode button and press D2 (decrease) or Eb2 (increase) to change the effect depth for built-in sounds.
How do I adjust the Acoustic Simulator settings on the CASIO CELVIANO AP-S200BN?
The CASIO CELVIANO AP-S200BN can simulate specific acoustic piano characteristics. Hold the Sound Mode button and press the corresponding keys to adjust these:
String Resonance: Keys C#3 to F#3.
Damper Resonance: Keys G3 to C4.
Damper Noise: Keys C#4 to F#4.
Key On Action Noise: Keys G4 to C5.
Key Off Action Noise: Keys C#5 to F#5.
For each setting, a higher number assigned to the keys increases the strength of the resonance or noise effect.
How do I change the touch response sensitivity on the CASIO CELVIANO AP-S200BN?
To adjust how the keyboard volume responds to your playing strength on the CASIO CELVIANO AP-S200BN:
Step 1. Hold down the Grand Piano button.
Step 2. Press a key from Eb1 to Ab1 to select a sensitivity level:
Eb1 (Off): Volume remains constant regardless of key pressure.
E1 (Light): Easier to produce loud sounds.
F1 (Medium light): Lighter than normal touch.
F#1 (Normal): Standard setting.
G1 (Medium heavy): Heavier than normal touch.
Ab1 (Heavy): Difficult to produce loud sounds, requires strong pressure.
How do I transpose the pitch on the CASIO CELVIANO AP-S200BN?
To raise or lower the overall pitch of the CASIO CELVIANO AP-S200BN in semitone steps:
Step 1. Hold down the Grand Piano button.
Step 2. Press the C#1 key to lower the pitch by a semitone or the D1 key to raise the pitch by a semitone.
Step 3. To reset to the default pitch, press C#1 and D1 simultaneously while holding the Grand Piano button.
The range is -12 to +12 semitones.
How do I record a performance using the MIDI Recorder on the CASIO CELVIANO AP-S200BN?
To record MIDI data to the internal memory of the CASIO CELVIANO AP-S200BN:
Step 1. Ensure the Recorder is set to MIDI mode (Hold Function and press B3).
Step 2. Touch the Record (0) button. It will blink red, indicating standby.
Step 3. Start playing. The button will stay lit red while recording is in progress.
Step 4. To stop recording, touch the Record button again. The light will return to white.
Step 5. To play back the recording, touch the Play/Stop button.
How do I pair the CASIO CELVIANO AP-S200BN with a Bluetooth audio device?
To play sound from a smart device through the CASIO CELVIANO AP-S200BN speakers:
Step 1. Plug the Wireless MIDI and Audio Adaptor into the USB Type A port.
Step 2. Enable Bluetooth on your smart device.
Step 3. Hold down the Function button on the piano and press the C#1 key (Wireless Audio Pairing). The Power button will flash blue.
Step 4. On your smart device, select WU-BT10 AUDIO to pair. When connected, a notification tone sounds and the Power button light stays blue.
How do I perform a factory reset on the CASIO CELVIANO AP-S200BN?
To return all settings of the CASIO CELVIANO AP-S200BN to their factory defaults:
Step 1. Hold down the Function button and press the A0 key (Factory Reset). The Function button will blink.
Step 2. While still holding the Function button, press the C1 key (Execute).
Step 3. Wait for the process to complete. When finished, all touch buttons on the panel will light up.
Note: Release the Function button only after pressing C1.
What should I do if no sound is produced on the CASIO CELVIANO AP-S200BN when keys are pressed?
Check the following if your CASIO CELVIANO AP-S200BN is silent:
1. Ensure the Volume knob is not turned all the way down.
2. Check if headphones or a conversion plug are connected to the PHONES/OUTPUT jacks; disconnect them to use the speakers.
3. Verify that the Local Control setting is not turned Off. Set it to On to hear the internal sound source.
4. Check the Speaker Out setting. Ensure it is set to On or Auto.
How do I fix touch buttons that are not responding on the CASIO CELVIANO AP-S200BN?
If the touch buttons on your CASIO CELVIANO AP-S200BN are unresponsive:
1. Ensure you are touching them firmly with bare fingers; they will not respond to gloved fingers or a stylus.
2. Adjust the sensitivity setting: Turn off the power, then while pressing the C8 key (the rightmost key), press the Power button. This sets the touch button sensitivity to high.
How do I format a USB flash drive on the CASIO CELVIANO AP-S200BN?
Warning: Formatting will delete all data on the drive. To format a drive for the CASIO CELVIANO AP-S200BN:
Step 1. Insert the USB flash drive into the USB Type A port.
Step 2. Press and hold the Function button and then press the C2 key (Format). The right side of the beat indicator will blink.
Step 3. Press the C1 key (Execute) while still holding Function.
Step 4. Once formatting begins, release the Function button. The indicator will return to normal when complete.
CLICK HERE TO DOWNLOAD CASIO CELVIANO AP-S200BN (01) PDF DOCUMENT