FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF USER GUIDE
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF USER MANUAL
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF OWNER GUIDE
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF OWNER MANUAL
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF REFERENCE GUIDE
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF REFERENCE MANUAL
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ASUS PRIME B360M-C-CSM (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ASUS PRIME B360M-C-CSM (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ASUS PRIME B360M-C-CSM (01) PDF SUMMARY:
What should I do before relocating the system to prevent electrical shock hazard?
Disconnect the power cable from the electrical outlet.
What should I ensure when adding or removing devices to or from the system?
Ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
What should I ensure before connecting or removing signal cables from the motherboard?
Ensure that all power cables are unplugged.
What should I do before using an adapter or extension cord?
Seek professional assistance before using an adapter or extension cord.
How should I ensure that my power supply is set to the correct voltage?
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
What should I do if the power supply is broken?
Do not try to fix it by yourself. Contact a qualified service technician or your retailer.
What should I do before installing the motherboard and adding components?
Carefully read all the manuals that came with the package.
What should I check before using the product?
Ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
What should I keep away from connectors, slots, sockets and circuitry to avoid short circuits?
Keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
What should I avoid to keep the product in good condition?
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
Where should I place the product?
Place the product on a stable surface.
What should I do if I encounter technical problems with the product?
Contact a qualified service technician or your retailer.
What should I do if any of the package contents are damaged or missing?
Contact your retailer.
What should I do before touching any component?
Unplug the power cord from the wall socket.
What should I do before handling components?
Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
What should I do before installing or removing any component?
Ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
What should I do before installing or removing the motherboard?
Unplug the power cord. Failure to do so can cause you physical injury and damage to motherboard components.
How should I connect the fan cables to the fan connectors on the motherboard?
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
What should I avoid doing with the fan connectors?
Do not place jumper caps on the fan connectors.
How should I connect the ATX power supply plugs into the connectors?
Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit.
What is the recommended power supply unit for a fully configured system?
We recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W.
What should I do if I am uncertain about the minimum power supply requirement for my system?
Refer to the Recommended Power Supply Wattage Calculator at http://support. asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
What kind of storage devices do the M.2 sockets support?
These M.2 sockets support M Key and 2242/2260/2280 storage devices.
What should I do before installing the CPU?
Unplug all power cables before installing the CPU.
What kind of CPU should I install on the LGA1151 socket?
Ensure that you install the correct CPU designed for the LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket.
What should I check upon purchase of the motherboard regarding the CPU socket?
Ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
What should I do with the CPU socket cap after installing the motherboard?
Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
What is not covered under the product warranty regarding the CPU socket?
The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
What should I do before installing the heatsink and fan?
Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
What kind of memory modules should I install in the DIMM sockets?
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these DIMM sockets.
What should I do when installing varying memory sizes in Channel A and Channel B?
The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
What kind of memory modules should I install for optimal compatibility?
Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules.
What should I do if I want to connect a USB 3.1 Gen 1 module?
Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1 Gen 1 front or rear panel ports.
What does the system panel connector support?
This connector supports several chassis-mounted functions.
What is the speaker connector used for?
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
What is the chassis intrusion header for?
This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
What should I do with the jumper caps on the chassis intrusion header if I intend to use the chassis intrusion detection feature?
Remove the jumper caps.
How do I erase the RTC RAM?
- Turn OFF the computer and unplug the power cord.
- Use a metal object such as a screwdriver to short the two pins.
- Plug the power cord and turn ON the computer.
- Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
What should I do if the steps to erase the RTC RAM do not help?
Remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
How do I connect a USB module cable?
Connect a USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
What is the LPC Debug header used for?
This header allows connection to a LPC debug card.
What is the TPM connector used for?
This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
What kind of devices does the LPT connector support?
The LPT (Line Printing Terminal) connector supports devices such as a printer.
How do I connect the serial port module cable?
Connect the serial port module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
What is the front panel audio connector used for?
This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to this connector.
What should I do to take advantage of the motherboard’s high-definition audio capability?
We recommend that you connect a high-definition front panel audio module to this connector.
What should I set the Front Panel Type item in the BIOS setup to if I want to connect a high-definition front panel audio module to the connector?
Set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this connector is set to [HD Audio].
What kind of cards does the PCI slot support?
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications.
What is the mono out header for?
This internal mono out header allows connection to an internal, low power speaker for basic system sound capability. You can connect a 3W speaker to this header, but the subsystem is capable of driving a speaker load of 2 Ohms at 2 Watts (rms).
What kind of cards do the PCI Express 3.0/2.0 x1 slots support?
These slots support PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.
What kind of card does the PCI Express 3.0/2.0 x16 slot support?
This motherboard supports a PCI Express 3.0/2.0 x16 graphic card that complies with the PCI Express specifications.
What should I do if the BIOS update fails?
The system will automatically activate ASUS Self-Recovering BIOS after reboot from the BIOS update failure.
How do I enter BIOS Setup at startup?
Press <Delete> or <F2> during the Power-On Self Test (POST).
How do I enter BIOS Setup after POST?
- Press <Ctrl>+<Alt>+<Del> simultaneously.
- Press the reset button on the system chassis.
- Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.
What can cause damage to data or system if I force reset from a running operating system?
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend you always shut down the system properly from the operating system.
What should I do if the system becomes unstable after changing any BIOS setting?
Load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5.
What should I do if the system fails to boot after changing any BIOS setting?
Try to clear the CMOS and reset the motherboard to the default value. See section Motherboard overview for information on how to erase the RTC RAM.
How do I load the default values for each of the parameters on the Setup menus?
Select the Load Optimized Defaults option. When you select this option or if you press <F5>, a confirmation window appears. Select OK to load the default values.
How do I save changes and reset?
Choose the Save Changes & Reset option from the Exit menu. When you select this option or if you press <F10>, a confirmation window appears. Select OK to save changes and exit.
How do I exit the Setup program without saving my changes?
Select the Discard Changes & Exit option. When you select this option or if you press <Esc>, a confirmation window appears. Select OK to discard changes and exit.
How do I attempt to launch the EFI Shell application from one of the available USB devices?
Select the Launch EFI Shell from USB drives option.
What should I do if this equipment causes harmful interference to radio or television reception?
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
What is required for the connection of the monitor to the graphics card to assure compliance with FCC regulations?
The use of shielded cables.
What should I do with the motherboard when it reaches the end of its life?
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. Check local regulations for disposal of electronic products.
What should I do with the mercury-containing button cell battery when it reaches the end of its life?
DO NOT throw the mercury-containing button cell battery in municipal waste.
CLICK HERE TO DOWNLOAD ASUS PRIME B360M-C-CSM (01) PDF MANUAL