FORMULER Z PRIME (01) PDF MANUAL

FORMULER Z PRIME (01) PDF SUMMARY:

Problem: No Picture. Does not display any message on the front panel.

Solution:

• Check the main power cable and check that it is plugged into a suitable power outlet.
• See ‘No Picture’ above.
• To match the STB system with your TV system (PAUNTSC), press Resolution button until a picture is displayed.
• Check the video output port is firmly connected to the TV.
• Check that you have selected the Video Input on your TV.
• Check the brightness level of the TV.
• Check the resolution that your TV supports, and set the proper resolution with the remote Resolution button to obtain a picture.

Problem: No Sound

Solution:

• Check the volume level of the TV and STB.
• Check the Mute status of the TV and STB.

Problem: Remote Control does not operate

Solution:

• Point remote control directly towards the STB.
• Check that the STB button lights up when you press any button.
• Check and replace batteries.