ASUS ZENFONE M1 X00PD (01) PDF MANUAL

For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/. (Search for ZB555KL)

To charge your ASUS Phone:

1. Connect the USB connector into the power adapter’s USB port.

2. Connect the other end of the USB cable to your ASUS Phone.

3. Plug the power adapter into a wall socket.

• When using your ASUS Phone while it is plugged into a power outlet, the grounded power outlet must be near to the unit and easily accessible.

• When charging your ASUS Phone through your computer, ensure that you plug the USB cable to your computer’s USB port.

• Avoid charging your ASUS Phone in an environment with ambient temperature of above 35°C (95°F).

• For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.

• For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone.

The input voltage range between the wall outlet and this adapter is AC 100V – 240V. The output voltage of the USB cable is +5V—2A, 10W.

To install a Nano SIM/ microSD card:

1. Push the bundled eject pin into the hole on the card slot to eject the tray out.

2. Insert the Nano SIM or microSD card into the appropriate slot.

3. Push the tray to close it.

• The Nano SIM card slots support GSM, WCDMA, FDD-LTE, and TDD-LTE network bands.

• The microSD card slot supports microSD and microSDHC card formats.

When two SIM cards are inserted, only one SIM card slot supports 4G/3G/2G service. The other SIM card slot only supports 2G/3G service.

• Do not use sharp tools or solvent on your device to avoid scratches on it.

• Use only a standard Nano SIM card on your ASUS Phone.

To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 15 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.

The highest FCC SAR values for the device are as follows:

• 0.72 W/Kg @ 1g(Head)

• 1.19 W/Kg @ 1g(Body)

SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQX00PD.

This equipment should be installed and operated with minimum distance 15 mm between the radiator and your body.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter, except tested built-in radios.

Items	Maximum Radio-Frequency Output Power Table
Bluetooth BR/EDR (2402~2480 MHz)	7.00(dBm)
Bluetooth 4.0-LE (2402~2480 MHz)	2.00(dBm)
2.4GHz 802.11b (2412~2472 MHz)	15.50(dBm)
2.4GHz 802.11g (2412~2472 MHz)	14.00(dBm)
2.4GHz 802.11n HT20 (2412~2472MHz)	12.50(dBm)
2.4GHz 802.11n HT40 (2422~2462MHz)	12.50(dBm)
GSM 900 Burst (880~915 ; 925~960 MHz)	33.50(dBm)
GSM 1800 Burst (1710~1785 ; 1805~1880 MHz)	30.00(dBm)
WCDMA Band I (1920~1980 ; 2110~2170 MHz)	23.50(dBm)
WCDMA Band VIII (880~915 ; 925~960 MHz)	23.50(dBm)
LTE Band I (1920~1980 ; 2110~2170 MHz)	23.50(dBm)
LTE Band III (1710~1785 ; 1805~1880 MHz)	23.50(dBm)
LTE Band VII (2500~2570 ; 2620~2690 MHz)	22.50(dBm)
LTE Band VIII (880~915 ; 925~960 MHz)	23.00(dBm)
LTE Band XX (832~862; 791~821 MHz)	23.50(dBm)
LTE Band XL (2300~2400 MHz)	23.00(dBm)

NOTE: This RF output power table is for EU member states, the EEA States, the EFTA States and Turkey only. The frequency range and the RF output power may differ from other non-EU countries.

The specific maximum SAR values for this device are as follows:

• Head: 0.397 W/Kg

• Body: 1.130 W/Kg

When carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposure requirements.

This ASUS product has been tested and meets applicable European SAR limits. The SAR limit is 2.0 W/kg in countries that set the limit averaged over 1 grams of tissue. The specific maximum SAR values for this device are as follows: ASUS_X00PD(ZB555KL) for IN

• Head: 0.821 W/Kg

• Body: 1.180 W/Kg

When carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 1 cm from the body to ensure compliance with RF exposure requirements. *(Note: The PDF states “European SAR limits” but then gives values “for IN” based on “1 grams of tissue”. European standard is typically 10g. This answer reflects the text as written in the PDF.)*

To use the GPS positioning feature on your ASUS Phone:

• Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps.

• For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data.

• When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Use your ASUS Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F).

Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.

WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm.

• Do not remove the non-detachable li-polymer battery as this will void the warranty.

• Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.

• Do not remove and replace the battery with a non-approved battery.

• Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device.

• Do not remove and soak the battery in water or any other liquid.

• Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.

• Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects.

• Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment.

• Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point.

• Do not touch the battery terminals.

• To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery.

NOTES:

• Risk of explosion if battery is replaced by an incorrect type.

• Dispose of used battery according to the instructions.

• Use only the charger supplied with your ASUS Phone.

• Never pull the charger cord to disconnect it from the power socket. Pull the charger itself.

Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.

• Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 °C (32°F) and 35 °C (95 °F).

• Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result.

• Do not short-circuit the battery terminals with metal items.

This device (front & rear side) should be operated under a seperation distance of 15 mm from the human body. * The other four sides are not in close proximity to the human body at the general use as described above.

Language Input : Hindi, English, Tamil Readability: Assamese, Bangla, Bodo(Boro), Dogri, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Maithili, Malayalam, Manipuri(Bangla), Manipuri (Meetei Mayek), Marathi, Nepali, Oriya, Panjabi, Santhali, Sanskrit, Sindhi (Devanagari) ,Tamil, Telugu, Urdu and English

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product.

For more legal and e-labelling information, check on your device from Settings > About > Legal information.