Free English ASPIRE SLYM (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE SLYM (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications of the ASPIRE SLYM?
The technical specifications for the ASPIRE SLYM are as follows:
Pod capacity: 1.8ml
Coil resistance: 1.2Ω
Coil material: Nichrome
Non-adjustable airflow
Continuous firing time: 10 seconds
Output wattage: Bypass
Output voltage: 3.0-4.2V
Built-in battery capacity: 1000mAh
Diameter: 20mm
Length (including drip tip): 108mm
What is included in the package box for the ASPIRE SLYM?
The ASPIRE SLYM package contains the following items:
1* Slym mod
1* Micro USB cable
1* User manual
1* Warranty card
Note: No pods are included in this package. Pods are sold separately.
How do I activate the pod for the ASPIRE SLYM?
To activate the pod for the ASPIRE SLYM:
1. Push the coil into the body of the disposable pod.
2. Allow the pod complete with coil to stand for 5 minutes, so that the cotton can become fully saturated with e-liquid before use.
How do I install the pod into the ASPIRE SLYM?
Follow these steps to install the pod into the ASPIRE SLYM:
1. Unscrew the top cap and remove it from the device.
2. Attach the activated pod, complete with the fully saturated coil to the top cap and screw the whole unit back into the metal sleeve of the device.
How do I lock or unlock the ASPIRE SLYM?
Press the fire button 5 times within 2 seconds to either lock or unlock the device. The LED light will flash white 3 times at the same time.
What do the LED indicator lights mean regarding battery charge on the ASPIRE SLYM?
When the ASPIRE SLYM is on, press the fire button, and the LED light will indicate your device’s current charge:
Above 3.8 volts: The light will be green.
Between 3.8 and 3.5 volts: The light will be blue.
Below 3.5 volts: The light will then become red to remind you that it is time to charge your device.
What protection features does the ASPIRE SLYM have?
The ASPIRE SLYM includes the following protection features:
Automatic Cutoff: The preset continuous fire time is 10 seconds. After 10 seconds of continuous firing, the device will stop firing and the LED light will flash purple 10 times. It will fire again when the button is pressed.
Short Circuit Protection: When the device detects a short, it will stop firing, and the LED light will flash purple 3 times.
Low Voltage Protection: When the battery level drops below 3.2V, the device will not function and the LED light will flash red 15 times.
Overcharge Protection: When the device is fully charged, it will stop charging to prevent overcharging of your battery.
Over Heat Protection: When the temperature of the control board is above 75℃/167℉, the LED light will remain on yellow for 3 seconds to indicate overheat and the device will cut off.
How do I charge the ASPIRE SLYM?
Charge the ASPIRE SLYM via the Micro USB port. The maximum charge current can reach up to 1A.
When the USB cable is attached, the device indicator light will flash red 3 times.
While charging, the LED will indicate the device’s current charge status:
3.5 volts or less = red light
3.5 to 3.8 volts = blue light
3.8 volts and above = green light
When the device is fully charged, the LED will flash green 20 times then remain off.
When the USB cable is detached, the indicator light will flash green 3 times.
What are the safety recommendations for carrying the ASPIRE SLYM?
To avoid misfiring, always ensure you either lock or switch off your ASPIRE SLYM when it is not in use. This is especially important when carrying your device in your pocket, bag, or purse.
What are the possible side effects of inhaling too much nicotine with the ASPIRE SLYM?
If you inhale too much nicotine or use the product too much, you may experience one or more of the following effects:
Feeling faint
Nausea (feeling sick)
Headache
Coughing
Irritation of the mouth or throat
Dizziness
Stomach discomfort
Hiccups
Nasal congestion
Vomiting (being sick)
Heart palpitations
Abnormal heart rate
If you experience any of these side effects, including any possible side effects not listed, discontinue using the product. If the effects continue after you stop use, consult your doctor or healthcare professional.
Who should not use nicotine-containing e-liquids with the ASPIRE SLYM?
Nicotine containing e-liquids are not recommended for:
Non-smokers
Young people under the age of 18 years
Pregnant or breast feeding women; as nicotine is known to cross the placenta and to be excreted in breast milk
Those experiencing general ill health; such as heart disease, stomach and duodenal ulcers, liver or kidney problems, long term throat disease or difficulty breathing due to bronchitis, emphysema or asthma
Those who have an overactive thyroid gland or have a phaeochromocytoma (a tumour of the adrenal gland that can affect high blood pressure)
Those who have diabetes, as nicotine may affect your blood sugar levels
Those taking the following medication: Theophylline (to treat breathing problems), Ropinirole (to treat restless leg syndrome), or Clozapine (to treat schizophrenia).
CLICK HERE TO DOWNLOAD ASPIRE SLYM (01) PDF DOCUMENT