Free English ASPIRE K1 STEALTH (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE K1 STEALTH (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the package contents of the ASPIRE K1 STEALTH kit?
The ASPIRE K1 STEALTH kit contains the following items:
1* K1 Stealth mod
1* K1 Plus tank
2* Nichrome coils (1*1.6Ω & 1*1.8Ω preinstalled)
1* Metal connecting ring
1* USB cable
1* User manual
What are the specifications and features of the ASPIRE K1 STEALTH tank and mod?
Tank Features:
Easy Top fill
Top and bottom child lock mechanism
1.9ml capacity
Airflow adjustable
Leak free refill system
Coil resistance: 1.8Ω (9-13W), 1.6Ω (6-11W)
Coil material: Nichrome
Tank is compatible with aspire original BVC coils and Spryte coils
Diameter: 16mm
Length (including drip tip): 57mm
Mod Specifications:
Optional output wattage: 8W, 10W, 12W
Supported resistance range: 1.0-2.0Ω
Continuous firing time: 10 seconds
Firmware update: N/A
Bottom wattage lights
Dimensions: 39*68*21mm
Battery type: Built-in LiPo
Battery capacity: 1000mah
How do I fill the tank on the ASPIRE K1 STEALTH?
1. Push down the drip tip and unscrew to remove it from the tank;
2. Add your preferred e-liquid by pushing the tip of your filling bottle through the filling hole;
3. Put the drip tip back on top of the tank then push down and screw at the same time to secure it.
Important: When using a new coil, let the tank stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil.
How do I install or replace the coil on the ASPIRE K1 STEALTH?
1. Invert the tank, push down the base hardware and unscrew to disengage it;
2. Push and unscrew to remove the used coil and also push and screw to install a new one;
3. Push down and screw in to relocate the base hardware.
Note: The pressing and twisting operations in each step are performed simultaneously.
How do I install the tank into the ASPIRE K1 STEALTH mod?
1. Screw the metal connecting ring to the bottom of the K1 Plus tank;
2. Insert the tank into the mod, the tank will be magnetically drawn into the mod and be held in place.
Note: In order to avoid dry burning and damage to the coil, please fill the tank before installation.
How do I turn the ASPIRE K1 STEALTH on and off?
Pressing the fire button 5 times within 2 seconds will turn the device on or off. The indicator light will flash white 3 times to indicate off or on.
How do I check the battery level while vaping the ASPIRE K1 STEALTH?
When the device is on, press the fire button, the indicator light will indicate your device’s current charge:
Green Light: Current charge capacity is above 3.8 volts.
Blue Light: The charge is between 3.5 and 3.8 volts.
Red Light: The charge drops below 3.5 volts (reminds you it is time to charge).
How do I set the output wattage on the ASPIRE K1 STEALTH?
Press the bottom mode button twice in rapid succession to adjust the output wattage. The bottom wattage lights will turn on to indicate the level of the output wattage:
One light illuminated: 8W
Two lights illuminated: 10W
Three lights illuminated: 12W
What do the protection feature lights mean on the ASPIRE K1 STEALTH?
Automatic cutoff: The preset continuous fire time is 10 seconds, after 10 seconds of continuous firing, the indicator light will flash pink 10 times and the device will stop firing.
Short circuit protection: When the device detects a short, it will stop firing, and the indicator light will flash pink 3 times.
Low voltage protection: When the battery level drops below 3.2V, the device will not function and the indicator light will flash red 15 times to remind you to charge the device.
Overcharge protection: When the device is fully charged, it will stop charging to prevent overcharging of your battery.
Over heat protection: When the temperature of the chip is above 75℃/167℉, the indicator light will be yellow for 3 seconds and the device will cut off.
How do I charge the ASPIRE K1 STEALTH?
Charge the ASPIRE K1 Stealth via the Micro-USB charging port; the maximum current can reach up to 2A.
When the USB cable is attached, the indicator light will flash red 3 times. While charging the indicator light will indicate the device’s current charge status:
Red Light: 3.5 volts or less
Blue Light: 3.5 to 3.8 volts
Green Light: 3.8 volts and above
When the device is fully charged, the indicator light will flash green 20 times then remain off. When you unplug the USB cable, the indicator light will flash green 3 times.
What safety notes should I follow when carrying the ASPIRE K1 STEALTH?
To avoid misfiring always ensure you either lock or switch off your device when it is not in use. Especially when carrying your device in your pocket, bag or purse.
CLICK HERE TO DOWNLOAD ASPIRE K1 STEALTH (01) PDF DOCUMENT