ASPIRE NX75 (01) PDF Document

The ASPIRE NX75 is intended to be used as a personal electronic device to enjoy audio. It is a premium product built for durability.

To extend the life of your ASPIRE NX75’s battery:

1. Always charge the battery completely.

2. The device has a rechargeable battery. For optimum performance, the first charge should be for 10-12 hours. Subsequent charging will take 4-5 hours or until the indicator light turns green.

3. Do not overcharge the device by leaving it plugged in constantly.

4. Charge the device only with the provided charging cable.

Long press the POWER button for 2-3 seconds until you hear a tone.

Long press the POWER button for 2-3 seconds until you hear a tone.

The LED indicator light will glow red when charging and will turn off when fully charged. For optimum performance, the first charge should be for 10-12 hours. Subsequent charging will take 4-5 hours or until the indicator light turns green.

1. Turn on the ASPIRE NX75.

2. You will hear a tone and the LED indicator will flash blue, meaning it is in pairing mode.

3. Go to the Bluetooth settings on your smart device and search for “ASPIRE NX75.”

4. Tap “ASPIRE NX75” to connect. Once connected, the device will make a tone and the LED indicator will stop flashing and glow solid blue.

When the ASPIRE NX75 is connected to your mobile phone and a call comes in, press the PLAY/PAUSE button once to answer. Press the PLAY/PAUSE button once again to hang up.

When the ASPIRE NX75 is connected to your mobile phone and a call comes in, press and hold the PLAY/PAUSE button to reject the call.

When the ASPIRE NX75 is connected to your mobile phone, quickly press the PLAY/PAUSE button twice to redial the last number.

While playing music, press the PLAY/PAUSE button once to pause. Press it once again to resume playing.

To increase the volume, press and hold the VOL+ button. To decrease the volume, press and hold the VOL- button.

To skip to the next track, press the VOL+ button once. To skip to the previous track, press the VOL- button once.

1. Plug one end of the 3.5mm AUX cable into the AUX port on the ASPIRE NX75.

2. Plug the other end into the headphone jack of your audio device.

3. The ASPIRE NX75 will automatically switch to AUX mode. The LED indicator will glow solid red.

The ASPIRE NX75 should only be cleaned with a dry cloth. Do not use chemical-based cleaners.

To ensure safe use of your ASPIRE NX75, please observe the following:

• Do not disassemble, repair, or modify the product.
• This product is not a toy. Do not let children play with it.
• This product is not waterproof. Do not immerse in water or expose to rain.
• Keep the product away from heat sources, such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Avoid prolonged exposure to direct sunlight.
• Always keep the product away from flammable materials.
• Use this product only for its intended use.
• Clean only with a dry cloth.