Free English ASPIRE POCKEX (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE POCKEX (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications and dimensions of the ASPIRE POCKEX?
The ASPIRE POCKEX is designed with the following physical and technical specifications:
| Diameter | 19.7mm |
| Length | 117.7mm |
| Battery Capacity | 1500mAh |
| Output Mode | Bypass Output |
| Supported Coil Resistance | 0.5 ohm to 2.0 ohm |
| Liquid Capacity | 2ML (TPD Compliant) |
| Included Coil Type | U-tech Coil: 0.6 ohm 316L SS (Rated for 18-23W) |
What are the key features of the ASPIRE POCKEX?
The ASPIRE POCKEX includes several advanced design features:
Top-Fill system for easy liquid refilling.
The ability to replace coils without needing to drain the E-Liquid from the tank.
Top Airflow system.
Leak-proof design.
2ML liquid capacity in compliance with TPD regulations.
Utilization of U-tech Coils (0.6 ohm 316L Stainless Steel).
How do I install a coil into the ASPIRE POCKEX?
To install a new coil in your ASPIRE POCKEX, follow these steps:
1. Unscrew and remove the top cap from the device.
2. Screw the new coil directly onto the top cap.
3. Screw the top cap (with the attached coil) back onto the ASPIRE POCKEX device.
How do I turn the ASPIRE POCKEX on or off?
To power the ASPIRE POCKEX On or Off, press the fire button 5 times rapidly. The LED lights located around the fire button will flash blue and pink three times to confirm the device has been switched on or off.
How can I check the battery charge level on my ASPIRE POCKEX?
While the device is powered on, the LED light around the fire button indicates the current charge level:
When the battery charge is above 30%, the LED light will be blue.
When the battery charge falls below 30%, the LED light around the fire button will turn orange, signaling that the device has a low battery.
What are the instructions for charging the ASPIRE POCKEX?
The ASPIRE POCKEX is charged via a USB port. The maximum charge current for the device can reach up to 800mA.
Connect the device to a charger. The light at the bottom of the device will turn red to indicate that it is currently charging. Once the device is fully charged, the light will turn green.
What precautions should I take when using a new atomizer with the ASPIRE POCKEX?
When using a new atomizer, you must let the tank stand for at least 2 minutes after filling. This allows the cotton inside the coil to become fully saturated with E-liquid before firing the device.
Additionally, do not let the tank become completely empty. Refill the tank regularly to avoid dry burning or causing permanent damage to the atomizer.
What items are included in the ASPIRE POCKEX package?
The standard ASPIRE POCKEX package contains the following components:
1 ASPIRE POCKEX Device
2 0.6 ohm 316L Stainless Steel Atomizers
1 USB Cable
1 User Manual
1 Warranty Card
CLICK HERE TO DOWNLOAD ASPIRE POCKEX (01) PDF DOCUMENT