Free English ASPIRE K LITE (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE K LITE (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the specifications of the ASPIRE K LITE?
The ASPIRE K LITE mod features the following specifications:
Optional output voltage: 3.0V, 3.5V, 4.0V, 4.5V, 5.0V
Supported resistance range: 0.8-3.0Ω
Continuous firing time: 10 seconds
Firmware update: N/A
Battery type: Built-in LiPo
Battery capacity: 900mAh
Dimensions: 26.5*75*17mm
What is included in the box with the ASPIRE K LITE?
1* K Lite mod
1* USB cable
1* Warranty card
1* User manual
How do I turn the ASPIRE K LITE on and off?
Pressing the fire button 5 times within 2 seconds will turn the device on or off. The indicator light will flash white 3 times to indicate on or off.
How do I use the ASPIRE K LITE for vaping and check the battery level?
When the device is on, press the fire button. The indicator light will indicate your device’s current charge:
When its current charge is above 3.8 volts (60-100%), the indicator light will be green.
When the charge is between 3.5 and 3.8 volts (30-60%), the light will be blue.
When the charge drops below 3.5 volts (0-30%), the light will then turn red to remind you that it is time to charge the device.
How do I adjust the output voltage on the ASPIRE K LITE?
Press the mode button to adjust the output voltage. The voltage display will turn on for 3 seconds to indicate the value of the corresponding output voltage: 3.0V, 3.5V, 4.0V, 4.5V, 5.0V.
What protection features does the ASPIRE K LITE have?
The ASPIRE K LITE includes several protection features:
Automatic cutoff: The preset continuous fire time is 10 seconds. After 10 seconds of continuous firing, the indicator light will flash pink 10 times and the device will stop firing.
Short circuit protection: When the device detects a short, it will stop firing, and the indicator light will flash pink 3 times.
Low voltage protection: When the battery level drops below 3.0V, the device will not function and the indicator light will flash red 15 times to remind you to charge the device.
Overcharge protection: When the device is fully charged, it will stop charging to prevent overcharging of your battery.
Over heat protection: When the temperature of the chip is above 75 °C/167 °F, the indicator light will be yellow for 3 seconds and the device will cut off.
How do I charge the ASPIRE K LITE?
Charge the device via the Micro USB charging port. The maximum current can reach up to 1A, and the recommended charging voltage is 5.0V.
When the USB cable is attached, the indicator light will flash red 3 times.
While charging, the indicator light will indicate the device’s current charge status:
3.5 volts or less (0-30%) = red light
3.5 to 3.8 volts (30-60%) = blue light
3.8 volts and above (60-100%) = green light
When the device is fully charged, the indicator light will flash green 20 times then remain off.
When you unplug the USB cable, the indicator light will flash green 3 times.
What safety precautions should I take when carrying the ASPIRE K LITE?
To avoid misfiring always ensure you either lock or switch off your device when it is not in use. Especially when carrying your device in your pocket, bag or purse.
CLICK HERE TO DOWNLOAD ASPIRE K LITE (02) PDF DOCUMENT