Free English ASPIRE ZELOS 50W 2.0 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE ZELOS 50W 2.0 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the ASPIRE ZELOS 50W 2.0 kit?
The ASPIRE ZELOS 50W 2.0 kit contains the following items:
1* Zelos 50W mod
1* Nautilus 2S tank
2* Coils (1*0.4Ω & 1*1.8Ω preinstalled)
10* O-rings
1* Extra drip tip
1* USB cable
1* User manual
What are the specifications of the ASPIRE ZELOS 50W 2.0 mod?
| Output wattage | 1-50W |
| Output voltage | 0.5V-8.0V |
| Resistance Parameters (VW/VV) | 0.1-3.5Ω |
| Resistance Parameters (Bypass) | 0.2-3.5Ω |
| Resistance Parameters (TC) | 0.1-1.0Ω |
| Continuous firing time | 10 seconds |
| Battery Type | Built-in LiPo |
| Battery capacity | 2500mah |
| Screen | 0.69 inch OLED screen |
| Dimensions | 79*38*23mm |
How do I fill the tank on the ASPIRE ZELOS 50W 2.0?
To fill the tank on your ASPIRE ZELOS 50W 2.0, follow these steps:
1. Partially unscrew the top cap to loosen.
2. Place your thumb on the top cap right above the triangle symbol and push the top cap away until the filling hole is revealed.
3. Add your preferred e-liquid into the tank through the filling hole.
4. Push the top cap back into place.
5. Screw down the top cap to seal.
Note: When using a new atomizer, let the tank stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer.
How do I install the coil on the ASPIRE ZELOS 50W 2.0?
Follow these steps for coil installation on the ASPIRE ZELOS 50W 2.0:
1. Invert the tank and unscrew to remove the base hardware.
2. Push down the child-proof mechanism and unscrew to disengage the child-proof coil component.
3. Detach the used coil and replace it with a new one.
4. Insert the child-proof coil component into the tank, then push down and screw in to relocate the child-proof coil component.
5. Screw the base hardware back to the tank.
How do I lock and unlock the ASPIRE ZELOS 50W 2.0?
Press the fire button 5 times within 2 seconds to either lock or unlock the device.
How do I turn the ASPIRE ZELOS 50W 2.0 on and off?
While the mod is locked, pressing the fire button for 3 seconds will turn the system off. To turn the mod back on press the fire button 5 times rapidly.
How do I use stealth mode on the ASPIRE ZELOS 50W 2.0?
Pressing the fire button 3 times rapidly when the mod is on will turn it into or out of stealth mode. While in stealth mode, the fire button will still function, the plus and minus buttons are both locked.
How do I change operating modes on the ASPIRE ZELOS 50W 2.0?
Pressing the “+” and “-” buttons simultaneously will allow you to select between VW, VV, Bypass and TC(Ni,Ti, SS) modes. Press the “+” or “-” button to select modes, then fire button to confirm.
How do I adjust the wattage, voltage, or temperature on the ASPIRE ZELOS 50W 2.0?
Press the “+” button to increase wattage, voltage or temperature or the “-” button to decrease. Pressing the “+” or “-” button longer will change the number faster.
How do I adjust wattage while in TC mode on the ASPIRE ZELOS 50W 2.0?
When the mod is in TC mode press the fire button and “-” button simultaneously to go into wattage setting interface, in which users can adjust the output wattage under TC mode just by clicking the “+” and “-” buttons, press the fire button to save the settings.
How do I lock the adjustment buttons on the ASPIRE ZELOS 50W 2.0?
When the mod is on, pressing the fire button and “+” button simultaneously will lock or unlock the buttons. When the buttons are locked, wattage, voltage and TC settings cannot be adjusted.
How do I change the temperature unit between Fahrenheit and Celsius on the ASPIRE ZELOS 50W 2.0?
To change temperature to Fahrenheit(F) or to Celsius(C), press the “+”or “-” button all the way to pass the temperature range, the temperature indicator will switch over to either Celsius or Fahrenheit automatically.
How does the sleep mode work on the ASPIRE ZELOS 50W 2.0?
The Zelos will enter its sleep mode after being idle for 1 minute, while in sleep mode press the fire button to wake the device.
What are the protection features of the ASPIRE ZELOS 50W 2.0?
The ASPIRE ZELOS 50W 2.0 includes the following protection features:
• Automatic Cut Off
• Short Circuit Protection
• Low Resistance Protection
• Overheat Protection
• Over Charge Protection
• Over Discharge Protection
How do I charge the ASPIRE ZELOS 50W 2.0?
Charge the Zelos via the Micro-USB charging port; the maximum current can reach up to 1A. Connect your Zelos mod to the charger and the screen will show a flashing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off.
What should I do to avoid misfiring the ASPIRE ZELOS 50W 2.0?
To avoid misfiring always ensure you either lock or switch off your device when it is not in use. Especially when carrying your device in your pocket, bag or purse.
Who should not use nicotine-containing e-liquids with the ASPIRE ZELOS 50W 2.0?
Nicotine containing e-liquids are not recommended for:
• Non-smokers
• Young people under the age of 18 years
• Pregnant or breast feeding women; as nicotine is known to cross the placenta and to be excreted in breast milk
• Those experiencing general ill health; such as heart disease, stomach and duodenal ulcers, liver or kidney problems, long term throat disease or difficulty breathing due to bronchitis, emphysema or asthma
• Those who have an overactive thyroid gland or have a phaeochromocytoma (a tumour of the adrenal gland that can affect high blood pressure)
• Those who have diabetes, as nicotine may affect your blood sugar levels
• Those taking the following medication: Theophylline (to treat breathing problems), Ropinirole (to treat restless leg syndrome), Clozapine (to treat schizophrenia)
What are the possible side effects of using nicotine with the ASPIRE ZELOS 50W 2.0?
If you inhale too much nicotine or use the product too much you may experience one or more of the following effects:
• Feeling faint
• Nausea (feeling sick)
• Headache
• Coughing
• Irritation of the mouth or throat
• Dizziness
• Stomach discomfort
• Hiccups
• Nasal congestion
• Vomiting (being sick)
• Heart palpitations
• Abnormal heart rate
If you experience any of these side effects; including any possible side effects not listed in the leaflet, discontinue using the product, if the effect(s) continue after you stop use, consult your doctor or healthcare professional.
CLICK HERE TO DOWNLOAD ASPIRE ZELOS 50W 2.0 (01) PDF DOCUMENT