ASPIRE VILTER 2 (01) PDF Document

The package content for the ASPIRE VILTER 2 includes:

1 * Vilter 2 Device (900 mAh)

1 * Vilter Pod 0.8Ω (2.0 ml)

1 * Paper Filter Drip Tip

1 * POM Drip Tip

1 * Type-C Cable

1 * User Manual

The specifications for the ASPIRE VILTER 2 are:

Dimensions: 117.2*22*12.4 mm

Pod Capacity: 2.0 ml

Coil Parameter: 0.8Ω Mesh Coil non-replaceable

Battery Capacity: Built-in 900 mAh

Output Mode: Constant 3.4V output

Charging: Type-C, 1A

Activation: Auto-draw

Compatible: Compatible with Vilter / Vilter 2 Pod

To fill the pod, follow these steps:

1. Lift the silicone seal at the bottom of the pod.

2. Add e-liquid.

3. Plug the silicone seal back firmly.

4. Insert the pod into the groove joint of the device.

Instructions:

Device Activation: Auto-draw. The device is activated by inhaling.

Pod connection: When the pod is connected, the LED light will flash pink 1 time.

Note: Remember to clean the condensation between the pod and device.

To charge the device:

1. Connect the Type-C cable. The maximum charging current is 1A.

2. While charging, the LED light will remain on.

3. When the device is fully charged, the LED light will turn off.

4. When you unplug the charging cable, the LED light will flash pink 3 times.

Coil Maintenance Safety:

To not let the coil burn out or become damaged, do not use the pod when the e-liquid level is low. Prolonged use of the coil can eventually lead to a burning taste or leakage. Please replace the pod in time.

Replacing the Pod Safety:

Do not use the pod if there are visible cracks, deformation or other damage. When replacing the pod, please ensure that the pod is firmly clicked into the device.

Charging and Usage Safety:

Only use the recommended charging adapter and cable. Do not use the device if it is overheating or emitting a burning smell.

Product Disposal Safety:

Do not discard the product/battery in the trash. Instead, drop it off at a designated collection point for the recycling of batteries.

IMPORTANT INFORMATION ABOUT USING NICOTINE CONTAINING E-LIQUID:

Before using nicotine containing e-liquid the user should read the following information carefully.

NICOTINE CONTAINING E-LIQUID:

Do not use if you are allergic to nicotine or any of the other ingredients contained within the e-liquid.

Do not use if you have heart disease, severe hypertension, or diabetes. It is not recommended for use by non-smokers.

The nicotine containing e-liquid is not suitable for:

• Pregnant or breastfeeding women.

• Persons under the legal smoking age.

• Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long term throat disease or difficulty breathing due to bronchitis, emphysema or asthma.

• Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumor of the adrenal gland that can affect high blood pressure).

• Those taking the medications Theophylline, Ropinirole or Clozapine.

If you inhale too much nicotine or use the product too much you may experience one or more of the following effects:

• Feeling faint

• Nausea (feeling sick)

• Headache

• Coughing

• Irritation of the mouth or throat

• Dizziness

• Stomach discomfort

• Hiccups

• Nasal congestion

• Vomiting (being sick)

• Heart palpitations

• Abnormal heart rate

If you experience any of these side effects; including any possible side effects not listed in the manual, discontinue using the product.