Free English ASPIRE K2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE K2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I turn the ASPIRE K2 on and off?
Pressing the fire button five times within two seconds will turn on and off the ASPIRE K2 battery. The fire button will flash blue and orange three times to indicate off or on.
How does the ASPIRE K2 indicate battery charge level during use?
When the ASPIRE K2 is in use, the light on the button will indicate the current charge:
When the current charge capacity is above 3.8 volts, the fire button will be blue and orange.
When the charge is between 3.8 and 3.5 volts, the button will be blue only.
When the charge drops below 3.5 volts, the light will then become orange to remind you that it is time to charge your ASPIRE K2.
What is the charging procedure for the ASPIRE K2?
When the USB cable is attached and the ASPIRE K2 begins charging, the button will flash blue and orange three times. While charging, the LED will indicate the current charge status:
3.5 volts or less will be indicated by an orange light.
3.5 to 3.8 volts is indicated by a blue light.
Charge above 3.8 volts is indicated by both blue and orange lights.
When the device fully charges, the LED will flash blue and orange 20 times.
When you unplug your ASPIRE K2, the button will flash blue and orange three times.
What protective features does the ASPIRE K2 have?
Automatic cutoff: After 15 seconds of use the device will cease firing and the LED light will flash both blue and orange ten times.
Short circuit protection: If the ASPIRE K2 detects a short circuit the device will immediately cease firing and the light will flash both blue and orange three times.
Low voltage protection: When the charge drops to 3.2 volts the LED will flash orange fifteen times and the device will stop functioning.
Overcharge protection: When the battery has fully charged to 4.2 volts the device will automatically stop charging.
High temperature protection: If the control board detects its temperature over 167 degrees Fahrenheit/75 degrees Celsius the device will cease functioning, and the LED light will turn both orange and blue for 3 seconds.
What are the technical specifications of the ASPIRE K2?
Tank capacity: 1.8ml
Atomizer: Kanthal 1.60 ohm
Battery capacity: 800 mah
Battery output voltage: 5.5V (without atomizer)
CLICK HERE TO DOWNLOAD ASPIRE K2 (01) PDF DOCUMENT