Free English ASPIRE VILTER S (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE VILTER S (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the box with the ASPIRE VILTER S?
The ASPIRE VILTER S package contains the following items:
1. 1 * Vilter S Device (500 mAh)
2. 1 * Vilter Pod (2.0 ml)
3. 1 * Paper Filter Drip Tip
4. 1 * POM Drip Tip
5. 1 * Type-C Cable
6. 1 * User Manual
What are the main components of the ASPIRE VILTER S?
The device components include:
1. Pod
2. Drip Tip
3. Airflow hole
4. Fire button
5. OLED Screen
6. Type-C Charging Port
What are the technical specifications of the ASPIRE VILTER S?
| Feature | Specification |
|---|---|
| Dimensions | 124*22.1*12.6 mm |
| Pod Capacity | 2.0 ml |
| Coil Parameters | 1.0Ω mesh coil (Kanthal AF), non-replaceable |
| Battery Capacity | 500 mAh |
| Activation Modes | Auto-draw / Button activated |
| Voltage Output | 3.5V constant output |
| Screen | 0.69 inch OLED screen |
| Charging | Type-C, 650 mA |
How do I fill the pod on the ASPIRE VILTER S?
Follow these steps to fill the pod:
1. Remove the pod from the device.
2. Lift the silicone seal at the bottom of the pod.
3. Add e-liquid.
4. Close the silicone seal securely and place the pod back into the device.
Warning: When using a new pod, after filling, please let the pod sit for 5 minutes before use to avoid burning the coil.
How do I turn the ASPIRE VILTER S on and off?
To turn the device on or off, press the fire button 5 times quickly (within 2 seconds). The screen will display “Aspire” when turning on and “Shut Down” when turning off.
How do I change the activation modes on the ASPIRE VILTER S?
To switch modes, press the fire button 3 times quickly (within 2 seconds). The screen will display the current mode.
Modes Available:
A Mode: Auto-draw only. (Display shows “A”)
B Mode: Button activated only. (Display shows “B”)
AB Mode: Both Auto-draw and Button activated. (Display shows “AB”)
How do I vape using the ASPIRE VILTER S?
Depending on the selected mode, you can either inhale through the mouthpiece (Auto-draw) or press the fire button to vape. The device provides a 3.5V constant output. The longest continuous vaping time is 7 seconds.
How do I charge the ASPIRE VILTER S?
Connect the Type-C cable to the charging port. The recommended charging voltage is 5V, and the maximum charge current is 650 mA.
While charging, the screen will display a growing battery icon. When the device is fully charged, the screen will shut off.
What safety features and protections does the ASPIRE VILTER S have?
| Protection Type | Condition | Screen Display |
|---|---|---|
| Over-time Protection | Vaping for more than 7s | “Over Time” |
| Short Circuit Protection | Short circuit detected | “Short Circuit” |
| Low Voltage Protection | Battery voltage drops low | “Low Battery” |
| Over-charge Protection | Battery is fully charged | The screen will shut off |
| Over-heat Protection | Internal temperature too high | “Too Hot” |
What important warnings should I follow when using the ASPIRE VILTER S?
Please adhere to the following precautions:
1. Make sure the silicone seal is firmly closed after filling the pod.
2. When using a new pod, let the pod stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use.
3. Do not let the pod become completely empty. Refill the pod to avoid dry burning or damage to the coil.
4. Please use the provided Type-C charging cable to charge the device.
5. Keep the contacts between the pod and the battery clean.
CLICK HERE TO DOWNLOAD ASPIRE VILTER S (01) PDF DOCUMENT